Chief TIL1X3IFJ Manual

Chief Flad panel støtte TIL1X3IFJ

Læs gratis den danske manual til Chief TIL1X3IFJ (24 sider) i kategorien Flad panel støtte. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Chief TIL1X3IFJ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

I N S T A L L A T I O N I N S T R U C T I O N S

TILVAB1 Accessory

TIL1X2IFJ

TIL1X3IFJ

TIL1X4IFJ

IFJ Series LED Wall Mounts / Accessory

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

TIL1X2IFJ / TIL1X3IFJ / TIL1X4IFJ/

TILVAB1

TIL1X2IFJ / TIL1X3IFJ / TIL1X4IFJ/ TILVAB1 Installation Instructions

DISCLAIMER

Legrand | AV and its affiliated corporations and subsidiaries

(collectively “Legrand | AV”), intend to make this manual

accurate and complete. However, Legrand | AV makes no claim

that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Legrand | AV

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Legrand | AV

assumes no responsibility for accuracy, completeness or

sufficiency of the information contained in this document.

Chief® is a registered trademark of Legrand AV Inc.

DEFINITIONS

MOUNTING SYSTEM: A MOUNTING SYSTEM is the

primary Chief product to which an accessory and/or component

is attached.

ACCESSORY: AN ACCESSORY is the secondary Chief

product which is attached to a primary Chief product, and may

have a component attached or setting on it.

COMPONENT: A COMPONENT is an audiovisual item

designed to be attached or resting on an accessory or mounting

system such as a video camera, CPU, screen, display,

projector, etc.

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all mounting systems

are properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this mounting system can result in serious personal injury

or damage to equipment! It is the installer’s responsibility to

make sure the structure to which this mounting system is

attached can support five times the combined weight of all

equipment. Reinforce the structure as required before

installing the mounting system. The wall to which the

mounting system is being attached may have a maximum

drywall thickness of 5/8” (1.6cm).

WARNING:

The TIL1X2IFJ / TIL1X3IFJ / TIL1X4IFJ LED

wall mounts are designed for use with LED panels only.

Exceeding the weight capacity (listed) can result in serious

personal injury or damage to equipment!

• TIL1X2IFJ: 60 lbs (27.2 kg) - 30 lbs (13.6 kg) per

screen;

• TIL1X3IFJ: 90 lbs (40.8 kg) - 30 lbs (13.6 kg) per

screen;

• TIL1X4IFJ: 120 lbs (54.4 kg) - 30 lbs (13.6 kg) per

screen.

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this mounting system outdoors.

IMPORTANT ! : The TIL1X2IFJ / TIL1X3IFJ /TIL1X4IFJ LED

wall mounts are designed to be mounted to:

• a bare 8" concrete or 8"x8"x16" concrete block wall; or

• a 3/4" thickness plywood-backed, 2" x 4" wood studs

(16" on center minimum) wall with a maximum drywall

thickness of 5/8"; or

• a 3/4" thickness plywood-backed, steel stud wall

covered with drywall having a maximum thickness of

5/8".

NOTE:

Go to

https://www.legrandav.com/resources/

product_videos?v=Chief_TiLED_LED_Video_Wall

_Mounting_System_Installation

   to view an

introductiontoinstallingChiefTiLEDMounting

Systems.

--SAVE THESE INSTRUCTIONS--

Produkt Specifikationer

Mærke:	Chief
Kategori:	Flad panel støtte
Model:	TIL1X3IFJ

Har du brug for hjælp?

Hvis du har brug for hjælp til Chief TIL1X3IFJ stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Flad panel støtte Chief Manualer

Chief MWCU Manual

3 April 2025

Chief KITXWXSM1U Manual

3 April 2025

3 April 2025

2 April 2025

9 Marts 2025

30 Januar 2025

30 Januar 2025

15 Januar 2025

15 Januar 2025

Chief TILD1X5NE1-M Manual

15 Januar 2025

Flad panel støtte Manualer

Nyeste Flad panel støtte Manualer

Anywhere Cart AC-GO-16 Manual

2 April 2025

Proaim P-DMC Manual

2 April 2025

Proaim CT-VNGD-CS Manual

2 April 2025

Mount-It! MI-7919 Manual

2 April 2025

Mount-It! MI-384 Manual

2 April 2025

Proaim CT-VNGD-UC5 Manual

2 April 2025

Premier Mounts 7170-0977 Manual

2 April 2025

Mount-It! MI-766 Manual

2 April 2025

Erard FLAK 800+ Manual

2 April 2025

Metronic 451060 Manual

28 Marts 2025