Chief TILD1X1US Manual

Chief Vægophæng TILD1X1US

Læs gratis den danske manual til Chief TILD1X1US (20 sider) i kategorien Vægophæng. Denne vejledning er vurderet som hjælpsom af 58 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 29.5 anmeldelser. Har du et spørgsmål om Chief TILD1X1US, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/20
I N S T A L L A T I O N I N S T R U C T I O N S
TILD1X05US-L
TILD1X1US
TILD1X2US-L
TILVAB2
Accessory
(Standard three-upright configuration shown for each model.
Configuration will vary based on application)
TILHDWUS
Kit
TILD1X2US-M
TILD1X2US-R
-L
TILD1X1US-M
TILD1X1US-R
TILD1X05US-M
TILD1X05US-R
U-Slim Series LED Wall Mounts / Accessory
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
TILD1X05US / TILD1X1US /
TILD1X2US / TILVAB2
TILD1X05US / TILD1X1US / TILD1X2US / TILVAB2 Installation Instructions
2
DISCLAIMER
Legrand AV and its affiliated corporations and subsidiaries
|
(collectively “Legrand AV”), intend to make this manual |
accurate and complete. However, Legrand AV makes no claim |
that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Legrand AV
|
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Legrand AV
|
assumes no responsibility for accuracy, completeness or
sufficiency of the information contained in this document.
Chief® is a registered trademark of Legrand AV Inc.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all mounting systems
are properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this mounting system can result in serious personal injury
or damage to equipment! It is the installer’s responsibility to
make sure the structure to which this mounting system is
attached can support five times the combined weight of all
equipment. Reinforce the structure as required before
installing the mounting system. The wall to which the
mounting system is being attached may have a maximum
drywall thickness of 5/8” (1.6cm). Do not install drywall
anchors into the seam between drywall pieces.
WARNING: The TILD1X05US / TILD1X1US / TILD1X2US
LED wall mounts are designed for use with LED panels only.
Exceeding the weight capacity (listed) can result in serious
personal injury or damage to equipment! Do NOT attach LED
panels to TILD1X05US / TILD1X1US / TILD1X2US LED
video wall mounts that exceed 30 lbs (13.6 kg) regardless of
the size or design of the configuration. See figure below for
examples.
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this mounting system outdoors.
IMPORTANT ! : The TILD1X05US / TILD1X2US /
TILD1X2US LED wall mounts are designed to be mounted to a
bare 8" concrete or 8"x8"x16" concrete block wall.
--SAVE THESE INSTRUCTIONS--
ONE LED PANEL
30 lbs (13.6 kg)
maximum
ONE LED PANEL
30 lbs (13.6 kg)
maximum
TILD1X05US (example)
TILD1X1US (example)

Produkt Specifikationer

Mærke: Chief
Kategori: Vægophæng
Model: TILD1X1US

Har du brug for hjælp?

Hvis du har brug for hjælp til Chief TILD1X1US stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vægophæng Chief Manualer

Chief

Chief MPT6000 Manual

7 Juli 2025
Chief

Chief PFCUS Manual

6 Juli 2025
Chief

Chief MFCUB Manual

6 Juli 2025
Chief

Chief LTM1U Manual

26 Juni 2025
Chief

Chief JWP210B Manual

6 Februar 2025
Chief

Chief TILSC05HUS Manual

16 Januar 2025
Chief

Chief TILD1X5NE1-L Manual

16 Januar 2025
Chief

Chief TILD1X2IER-L Manual

15 Januar 2025
Chief

Chief TILD1X1US Manual

29 November 2024
Chief

Chief PFQUB Manual

27 Juni 2024

Vægophæng Manualer

Nyeste Vægophæng Manualer

Tracer

Tracer WallFlex Manual

13 August 2025
Tracer

Tracer EasyTilt Manual

13 August 2025
Tracer

Tracer PivotMaster Manual

12 August 2025
Tracer

Tracer Wall 660 Manual

12 August 2025
Tracer

Tracer WallGrip Manual

12 August 2025
Peerless-AV

Peerless-AV ECMU-02-C-S Manual

8 August 2025
Peerless-AV

Peerless-AV ECMU-01-I Manual

7 August 2025
Peerless-AV

Peerless-AV DST940-BTB Manual

7 August 2025
Peerless-AV

Peerless-AV ST940-EXC Manual

7 August 2025
Digitus

Digitus DA-90421 Manual

5 August 2025