Chief TILD1X2US Manual

Chief Vægbeslag TILD1X2US

Læs gratis den danske manual til Chief TILD1X2US (20 sider) i kategorien Vægbeslag. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Chief TILD1X2US, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/20
I N S T A L L A T I O N I N S T R U C T I O N S
TILD1X05US-L
TILD1X1US
TILD1X2US-L
TILVAB2
Accessory
(Standard three-upright configuration shown for each model.
Configuration will vary based on application)
Kit
TILD1X2US-M
TILD1X2US-R
-L
TILD1X1US-M
TILD1X1US-R
TILD1X05US-M
TILD1X05US-R
U-Slim Series LED Wall Mounts / Accessory
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
TILD1X05US / TILD1X1US /
TILD1X2US / TILVAB2
TILD1X05US / TILD1X1US / TILD1X2US / TILVAB2 Installation Instructions
2
DISCLAIMER
Legrand AV and its affiliated corporations and subsidiaries |
(collectively “Legrand AV”), intend to make this manual |
accurate and complete. However, Legrand AV makes no claim |
that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Legrand AV |
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Legrand AV |
assumes no responsibility for accuracy, completeness or
sufficiency of the information contained in this document.
Chief® is a registered trademark of Legrand AV Inc.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all mounting systems
are properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this mounting system can result in serious personal injury
or damage to equipment! It is the installer’s responsibility to
make sure the structure to which this mounting system is
attached can support five times the combined weight of all
equipment. Reinforce the structure as required before
installing the mounting system. The wall to which the
mounting system is being attached may have a maximum
drywall thickness of 5/8” (1.6cm). Do not install drywall
anchors into the seam between drywall pieces.
WARNING: The TILD1X05US / TILD1X1US / TILD1X2US
LED wall mounts are designed for use with LED panels only.
Exceeding the weight capacity (listed) can result in serious
personal injury or damage to equipment! Do NOT attach LED
panels to TILD1X05US / TILD1X1US / TILD1X2US LED
video wall mounts that exceed 30 lbs (13.6 kg) regardless of
the size or design of the configuration. See figure below for
examples.
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this mounting system outdoors.
IMPORTANT ! : The TILD1X05US / TILD1X2US /
TILD1X2US LED wall mounts are designed to be mounted to a
bare 8" concrete or 8"x8"x16" concrete block wall.
--SAVE THESE INSTRUCTIONS--
ONE LED PANEL
30 lbs (13.6 kg)
maximum
ONE LED PANEL
30 lbs (13.6 kg)
maximum
TILD1X05US (example)
TILD1X1US (example)

Produkt Specifikationer

Mærke: Chief
Kategori: Vægbeslag
Model: TILD1X2US

Har du brug for hjælp?

Hvis du har brug for hjælp til Chief TILD1X2US stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vægbeslag Chief Manualer

Chief

Chief TILD1X2US Manual

6 Juli 2025
Chief

Chief MPD1U Manual

21 Juli 2024
Chief

Chief XBM1UP Manual

21 Juli 2024
Chief

Chief XTM1U Manual

21 Juli 2024
Chief

Chief LSM1U Manual

21 Juli 2024
Chief

Chief FWDSK110 Manual

11 Juli 2024

Vægbeslag Manualer

Nyeste Vægbeslag Manualer

Titan

Titan BFMO 8120 Manual

15 September 2025
Titan

Titan BTI 8060 Manual

14 September 2025
Titan

Titan BTI 8020 Manual

14 September 2025
Titan

Titan BFMO 8060 Manual

14 September 2025
Titan

Titan BFMO 8560 Manual

14 September 2025
Titan

Titan BFMO 8060 W Manual

14 September 2025
Titan

Titan BFMO 8860 Manual

14 September 2025
Titan

Titan BFMO 8140 Manual

14 September 2025
AMX

AMX CB-TP5i Manual

14 September 2025
Adam

Adam BRACKET Manual

12 September 2025