Cisco Aironet 1602i Manual

Cisco Adgangspunkt Aironet 1602i

Læs gratis den danske manual til Cisco Aironet 1602i (38 sider) i kategorien Adgangspunkt. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Cisco Aironet 1602i, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/38

G ETTING S GTARTED UIDE

Cisco Aironet 1600 Series Access Points

First Published: December, 2012

Last Updated: March 31, 2015

1About this Guide

2Introduction to the Access Point

3Safety Instructions

4Unpacking

5Configurations

6Access Point Ports and Connectors

7Configuring the Access Point

8Mounting the Access Point

9Deploying the Access Point on the Wireless Network

10 Troubleshooting

11 Declarations of Conformity and Regulatory Information

12 Access Point Specifications

1 About this Guide

This Guide provides instructions on how to install and configure your Cisco Aironet 1600 Series

Access Point. The 1600 Series Access Point is referred to as the 1600 series or the access point

in this

document.

2 Introduction to the Access Point

The 1600 series offers dual-band radios (2.4 GHz and 5 GHz) with integrated and external antenna

options. The access points support full interoperability with leading 802.11n clients, and support a

mixed deployment with other access points and controllers.

The 1600 series access point is available in controller-based mode and supports:

• Simultaneous single-band or dual-band (2.4 GHz/5 GHz) radios

• Integrated antennas on 1602I access point models (AIR-CAP1602I-x-K9, AIR-AP1602I-UXK9)

• External antennas on 1602E access point models (AIR-CAP1602E-x-K9, AIR-AP1602E-UXK9)

Note The ‘x’ in the model numbers represents the regulatory domain. Model numbers

containing -UX, support the universal regulatory domain. For information on supported

regulatory domains, see “Regulatory Domains” section on page 6.

The features of the 1600 series are:

• Processing sub-systems (including CPUs and memory) and radio hardware which supports:

–

Network management

–

ClientLink 2.0—BeamForming to 802.11n clients as well as legacy 802.11a/g OFDM clients

–

VideoStream

–

Location

–

WIDS/WIPS

–

Security

–

Radio Resource Management (RRM)

–

Rogue detection

–

Management Frame Protection (MFP)

• 32 MB flash size

• 802.11af/at

–

CDP (Cisco Discovery Protocol)

Produkt Specifikationer

Mærke:	Cisco
Kategori:	Adgangspunkt
Model:	Aironet 1602i
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50/60 Hz
Bredde:	221 mm
Dybde:	221 mm
Højde:	47 mm
Vægt:	860 g
Opbevaringstemperatur (T-T):	-30 - 70 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Ethernet LAN-porte (RJ-45):	1
Driftstemperatur (T-T):	0 - 40 °C
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Sikkerhedsalgoritmer:	EAP,EAP-TLS,EAP-TTLS,PEAP,TKIP,WPA,WPA2
Intern hukommelse:	256 MB
Certificering:	FCC Bulletin OET-65C\r\nRSS-102
Netværksstandarder:	IEEE 802.11a,IEEE 802.11b,IEEE 802.11g,IEEE 802.11h,IEEE 802.11n,IEEE 802.3af
Webbaseret administration:	Ingen
LED-indikatorer:	Ja
Frekvensbånd:	2.4, 5 GHz
Intern:	Ingen
Maksimal dataoverførselshastighed:	300 Mbit/s
Flashhukommelse:	32 MB
Strøm over Ethernet (PoE):	Ja
2.4 GHz:	Ja
5 GHz:	Ja
WAN-forbindelse:	Ethernet (RJ-45)
Antennefunktioner:	Integreret antenne
Overholdelse af branchestandarder:	IEEE 802.11a/b/g, IEEE 802.11n, IEEE 802.11h, IEEE 802.11d
Niveau for antennestyrke (maks.):	4 dBi
Sikkerhed:	UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1