Cisco Aironet 3600i Manual

Cisco Adgangspunkt Aironet 3600i

Læs gratis den danske manual til Cisco Aironet 3600i (31 sider) i kategorien Adgangspunkt. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Cisco Aironet 3600i, eller vil du spørge andre brugere om produktet?

Side 1/31
G ETTING S GTARTED UIDE
Cisco Aironet 3600 Series Lightweight Access Points
Last Updated: March 31, 2015
1About this Guide
2Introduction to the Access Point
3Safety Instructions
4Unpacking
5Configurations
6Access Point Ports and Connectors
7Configuring the Access Point
8Mounting the Access Point
9Deploying the Access Point on the Wireless Network
10 Installing Modules
11 Troubleshooting
12 Declarations of Conformity and Regulatory Information
13 Configuring DHCP Option 43 and DHCP Option 60
14 Access Point Data Sheet
15 Obtaining Documentation and Submitting a Service Request
2
1 About this Guide
This Guide provides instructions on how to install and configure your Cisco Aironet 3600 Series Access Point and how to install
any port modules. This guide also provides mounting instructions and limited troubleshooting procedures.
The 3600 Series Access Point is referred to as the access point in this document.
2 Introduction to the Access Point
The 3600 series supports high-performing Spectrum Intelligence which sustains three spatial stream rates over a deployable
distance with high reliability when serving clients. The 3600 series provides high reliability and overall wireless performance.
The 3600 series offers dual-band radios (2.4 GHz and 5 GHz) with integrated and external antenna options. The access points
support full inter-operability with leading 802.11n clients, and support a mixed deployment with other access points and
controllers.
The 3600 series access point is a controller-based (Unified) product and supports:
Simultaneous dual-band (2.4 GHz/5 GHz) radios
Integrated antennas on the 3602I access point model (AIR-CAP3602I-x-K9, AIR-AP3602I-UXK9)
External antennas for rugged 3602E access point model (AIR-CAP3602E-x-K9, AIR-AP3602E-UXK9)
Note The x in the model numbers represents the regulatory domain. Model numbers containing -UX, support the
universal regulatory domain. Refer to Regulatory Domains” section on page 5 for a list of supported regulatory
domains.
The features of the 3600 series are:
Processing sub-systems (including CPUs and memory) and radio hardware which supports:
Network management
CleanAir Automatic detection, classification, location and mitigation of RF interference
ClientLink+ BeamForming to 802.11n clients as well as legacy 802.11a/g OFDM clients
VideoStream
Location
WIDS/WIPS
Security
Radio Resource Management (RRM)
Rogue detection
Management Frame Protection (MFP)
Throughput, forwarding, and filtering performance scaled to meet 3 spatial stream 450 Mbps data-rates
32 MB flash size
802.11af/at
CDP (Cisco Discovery Protocol)
2.4 GHz and 5 GHz 802.11n radios with the following features:
4TX x 4RX
3-spatial streams, 450 Mbps PHY rate
Spectrum intelligence
DPD (Digital Pre-Distortion) technology
Cisco Vector BeamformingImplicit Co-phase beamforming for .11ag clients and 1x1 11n clients
Radio hardware is capable of explicit compressed beamforming (ECBF) per 802.11n standard


Produkt Specifikationer

Mærke: Cisco
Kategori: Adgangspunkt
Model: Aironet 3600i

Har du brug for hjælp?

Hvis du har brug for hjælp til Cisco Aironet 3600i stil et spørgsmål nedenfor, og andre brugere vil svare dig