Cisco Aironet 2600e Manual

Cisco Adgangspunkt Aironet 2600e

Læs gratis den danske manual til Cisco Aironet 2600e (40 sider) i kategorien Adgangspunkt. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Cisco Aironet 2600e, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/40

G ETTING S GTARTED UIDE

Cisco Aironet 2600 Series Access Points

July, 2012

P/N: 78-20842-01

1About this Guide

2Introduction to the Access Point

3Safety Instructions

4Unpacking

5Configurations

6Access Point Ports and Connectors

7Configuring the Access Point

8Mounting the Access Point

9Deploying the Access Point on the Wireless Network

10 Troubleshooting

11 Declarations of Conformity and Regulatory Information

12 Configuring DHCP Option 43 and DHCP Option 60

13 Access Point Specifications

1 About this Guide

This Guide provides instructions on how to install and configure your Cisco Aironet 2600 Series

Access Point. The 2600 Series Access Point is referred to as the 2600 series or the access point

in this

document.

2 Introduction to the Access Point

The 2600 series supports high-performing Spectrum Intelligence which sustains three spatial stream

rates over a deployable distance with high reliability when serving clients. The 2600 series provides

high reliability and overall wireless performance.

The 2600 series offers dual-band radios (2.4 GHz and 5 GHz) with integrated and external antenna

options. The access points support full inter-operability with leading 802.11n clients, and support a

mixed deployment with other access points and controllers.

The 2600 series access point is available in both controller-based (Unified) and standalone

(Autonomous) configurations and supports:

• Simultaneous single-band or dual-band (2.4 GHz/5 GHz) radios

• Integrated antennas on 2602I access point models (AIR-CAP2602I-x-K9)

• External antennas for rugged 2602E access point models (AIR-CAP2602E-x-K9)

Note The ‘x’ in the model numbers represents the regulatory domain. Refer to “Regulatory

Domains” section on page 6 for a list of supported regulatory domains.

The features of the 2600 series are:

• Processing sub-systems (including CPUs and memory) and radio hardware which supports:

–

Network management

–

CleanAir—Automatic detection, classification, location and mitigation of RF interference

(not available on autonomous or standalone models)

–

ClientLink 2.0—BeamForming to 802.11n clients as well as legacy 802.11a/g OFDM clients

–

VideoStream

–

Location

–

WIDS/WIPS

–

Security

–

Radio Resource Management (RRM)

–

Rogue detection

Produkt Specifikationer

Mærke:	Cisco
Kategori:	Adgangspunkt
Model:	Aironet 2600e
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50/60 Hz
Bredde:	221 mm
Dybde:	221 mm
Højde:	54 mm
Vægt:	1040 g
Produktfarve:	Hvid
Opbevaringstemperatur (T-T):	-30 - 70 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Ethernet LAN-porte (RJ-45):	1
Driftstemperatur (T-T):	0 - 40 °C
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Sikkerhedsalgoritmer:	AES,EAP,EAP-FAST,EAP-TLS,EAP-TTLS,MSCHAPv2,PEAP,TKIP,WPA,WPA2
Intern hukommelse:	256 MB
Netværksstandarder:	IEEE 802.11a,IEEE 802.11b,IEEE 802.11g,IEEE 802.11h,IEEE 802.11n,IEEE 802.3af
Antenner, antal:	4
Webbaseret administration:	Ingen
LED-indikatorer:	Status
Antal brugere:	- bruger(e)
Driftshøjde:	0 - 3000 m
Ikke-drift højde:	0 - 4572 m
Frekvensbånd:	2.4, 5 GHz
Intern:	Ingen
Maksimal dataoverførselshastighed:	450 Mbit/s
Flashhukommelse:	32 MB
Strøm over Ethernet (PoE):	Ja
Antal kanaler:	2 kanaler
2.4 GHz:	Ja
5 GHz:	Ja
WAN-forbindelse:	Ethernet (RJ-45)
Antennefunktioner:	Integrated antenna,Detachable antenna
Niveau for antennestyrke (maks.):	6 dBi
Understøttede protokoller:	FCC, RSS, EN, EMI, ICES, VCCI