Cisco Aironet 2600i Manual

Cisco Adgangspunkt Aironet 2600i

Læs gratis den danske manual til Cisco Aironet 2600i (40 sider) i kategorien Adgangspunkt. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Cisco Aironet 2600i, eller vil du spørge andre brugere om produktet?

Side 1/40
G ETTING S GTARTED UIDE
Cisco Aironet 2600 Series Access Points
July, 2012
P/N: 78-20842-01
1About this Guide
2Introduction to the Access Point
3Safety Instructions
4Unpacking
5Configurations
6Access Point Ports and Connectors
7Configuring the Access Point
8Mounting the Access Point
9Deploying the Access Point on the Wireless Network
10 Troubleshooting
11 Declarations of Conformity and Regulatory Information
12 Configuring DHCP Option 43 and DHCP Option 60
13 Access Point Specifications
2
1 About this Guide
This Guide provides instructions on how to install and configure your Cisco Aironet 2600 Series
Access Point. The 2600 Series Access Point is referred to as the 2600 series or the access point in this
document.
2 Introduction to the Access Point
The 2600 series supports high-performing Spectrum Intelligence which sustains three spatial stream
rates over a deployable distance with high reliability when serving clients. The 2600 series provides
high reliability and overall wireless performance.
The 2600 series offers dual-band radios (2.4 GHz and 5 GHz) with integrated and external antenna
options. The access points support full inter-operability with leading 802.11n clients, and support a
mixed deployment with other access points and controllers.
The 2600 series access point is available in both controller-based (Unified) and standalone
(Autonomous) configurations and supports:
Simultaneous single-band or dual-band (2.4 GHz/5 GHz) radios
Integrated antennas on 2602I access point models (AIR-CAP2602I-x-K9)
External antennas for rugged 2602E access point models (AIR-CAP2602E-x-K9)
Note The xin the model numbers represents the regulatory domain. Refer to Regulatory
Domains section on page 6 for a list of supported regulatory domains.
The features of the 2600 series are:
Processing sub-systems (including CPUs and memory) and radio hardware which supports:
Network management
CleanAirAutomatic detection, classification, location and mitigation of RF interference
(not available on autonomous or standalone models)
ClientLink 2.0—BeamForming to 802.11n clients as well as legacy 802.11a/g OFDM clients
VideoStream
Location
WIDS/WIPS
Security
Radio Resource Management (RRM)
Rogue detection


Produkt Specifikationer

Mærke: Cisco
Kategori: Adgangspunkt
Model: Aironet 2600i

Har du brug for hjælp?

Hvis du har brug for hjælp til Cisco Aironet 2600i stil et spørgsmål nedenfor, og andre brugere vil svare dig




Adgangspunkt Cisco Manualer

Cisco

Cisco 541N Manual

9 Oktober 2024
Cisco

Cisco Aironet 1142N Manual

27 September 2024
Cisco

Cisco Meraki MR72 Manual

19 September 2024
Cisco

Cisco Meraki MR74 Manual

1 September 2024

Adgangspunkt Manualer

Nyeste Adgangspunkt Manualer