Cisco WAP351 Manual

Cisco Adgangspunkt WAP351

Læs gratis den danske manual til Cisco WAP351 (12 sider) i kategorien Adgangspunkt. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Cisco WAP351, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Quick Start Guide

Cisco WAP351 Wireless-N Dual Radio Access

Point with 5 Ports Switch

Package Contents

•Wireless Access Point

•Mounting Kit

•This Quick Start Guide

•Product CD

•Ethernet Cable

•Technical Support Contact

•China RoHS (for China SKU only)

2 Cisco WAP351 Quick Start Guide

Welcome

Thank you for choosing the Cisco WAP351 Wireless-N Dual Radio Access

Point with 5 Ports Switch. The Cisco WAP351 is an indoor concurrent

dual-band radio 802.11n access point with integrated PoE switch.

This guide provides the general layout of the Cisco WAP351, describe

how to deploy the Cisco WAP351 in your network, and describe how to

configure the Cisco WAP351. For additional information, see

www.cisco.com/go/300_wap_resources.

Before You Begin

Before you begin the installation, make sure that you have the following

equipment and services:

•A computer with browser support for:

– Internet Explorer 7.0 or later

– Chrome 5.0 or later

– Firefox 3.0 or later

– Safari 3.0 or later

•Tools for installing the hardware

•One or more Ethernet network switches with PoE

Cisco WAP351 Features

Front Panel

The front panel of the Cisco WAP351 consists of three lights: Power,

WLAN, and PSE. For full descriptions of the colors of the lights and their

indications, see “Verifying the Hardware Installation”.

Back Panel

POWER—The POWER button is used to turn the power on and off. It is not

applicable when using PoE.

48V DC—The 48V DC jack is used to connect the power adapter to the

Cisco WAP351 if you are not using PoE.

RESET—See “Rebooting the Cisco WAP351 or Resetting to Factory

Defaults” for information on the RESET button.

Produkt Specifikationer

Mærke:	Cisco
Kategori:	Adgangspunkt
Model:	WAP351
Tænd-/slukkontakt:	Ja
Vekselstrømsindgangsspænding:	48 V
Bredde:	230 mm
Dybde:	230 mm
Højde:	40 mm
Vægt:	607 g
Produktfarve:	Hvid
Opbevaringstemperatur (T-T):	-20 - 70 °C
Relativ luftfugtighed ved drift (H-H):	10 - 85 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 90 %
Ethernet LAN-porte (RJ-45):	5
Driftstemperatur (T-T):	0 - 40 °C
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Sikkerhedsalgoritmer:	802.1x RADIUS, WPA, WPA2
Intern hukommelse:	128 MB
Hurtig start guide:	Ja
Kabler inkluderet:	LAN (RJ-45)
Operativsystem installeret:	Linux
Certificering:	UL 60950-1\nCAN/CSA-C22.2 No. 60950-1\nIEC 60950-1\nEN 60950-1\nFCC\nICES-003\nEN 301.489-1
Placering:	Ceiling, Table, Wall
Netværksstandarder:	IEEE 802.11a, IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
DHCP-klient:	Ja
Webbaseret administration:	Ja
Knap til nulstilling:	Ja
Servicekvalitet support (QoS):	Ja
LED-indikatorer:	Ja
Slot til kabellås:	Ja
Frekvensbånd:	2.412 - 2.472, 5.18 - 5.24 GHz
Intern:	Ingen
Maksimal dataoverførselshastighed:	1000 Mbit/s
Wi-Fi-datahastighed (maks.):	300 Mbit/s
Antenne type:	Intern
Indgangsstrøm:	1.25 A
Kabellåseslids type:	Kensington
Flashhukommelse:	128 MB
Strøm over Ethernet (PoE):	Ja
Monteringssæt:	Ja
Antal kanaler:	17 kanaler
VLAN understøttelse:	Ja
Administrationsprotokoller:	HTTP/HTTPS, SNMP v3, Bonjour
2.4 GHz:	Ja
5 GHz:	Ja
CD manual:	Ja
Niveau for antennestyrke (maks.):	5.3 dBi
Trådløs isolation:	Ja
Wi-Fi-multimedie (WMM)/(WME):	Ja
Automatisk trådløs forsendelsessystem (WDS):	Ja
Syslog:	Ja
Automatisk kanalvalg:	Ja
Driftsmodus:	Access Point (AP), WDS Bridge, Workgroup Bridge