Citizen Cal 0540 Manual

Citizen Ur Cal 0540

Læs gratis den danske manual til Citizen Cal 0540 (4 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Citizen Cal 0540, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

CITIZEN QUARTZ

ANALOG

CHRONOGRAPH

Caliber No. 0510, 0540, 0560

CTZ-P6746

MODEL No. ANO ❈❈❈

AN1❈❈❈

• INSTRUCTION MANUAL

• Before Using The Watch

Confirm the Caliber No. of your watch by the stamp

on its case back as shown below.

This instruction manual explains how to use

Calibers: 0510, 0540 and 0560.

• Main Components

• Setting the Watch

1. Wait till small second hand is on “0” sec, then

crown to position (2) it stops the small second

hand.

2. Turn the crown to set the minute/hour hands to

the desired time. *The 24-hour hand 4 is

synchronised with the hour hand (0540). Use the

24-hour time display as a reference to confirm

a.m. and p.m. setting.

3. To start the small second hand, push the crown

back to position (0). *Reduction of power

consumption: crown at (2) movement stop.

1. When the crown is pulled out in position (2), the

C.G 1/20 second hand 3 is instantaneously

returned to “0” position.

2. Turn the crown to set the minute/hour hands to

the desired time.

3. To start the C.G 1/20 second hand by one step

moving, push the crown back to position (0).

*Reduction of power consumption: crown at (2)

movement stop.

• Setting the Date

1. Pull out the crown to position (1).

2. Turn the crown till the desired date appears.

*Do not set the date between 9:00 p.m. and

1:00 a.m. otherwise the date may not change

properly.

3. Push the crown back to position (0) after setting

the date.

0510 0540

0560

0510 0540 0560

• Chronograph operation

The crown is set to normal time position.

The chronograph can measure up to

12 hours in one second increments.

The chronograph can measure up to

60 minutes in one second increments.

The chronograph can measure up to

12 hours in 1/20 (0.05) second increments.

C.G 1/20 second hand will still indicate the correct

time measurement even when the chronograph is

started by pressing button A, while the C.G 1/20

second hand is functioning as one step movement.

The C.G 1/20 second hand automatically stops at

00 second position 30 seconds after the

chronograph is started. When the chronograph is

stopped by the button A, the C.G 1/20 second hand

indicates the elapsed time.

When button B is pressed again after the

chronograph has been reset, the C.G 1/20 second

hand starts to function as one step movement to

confirm watch operation.

*The hour/minute hands indicate the current time

even when the chronograph is being used.

• Adjusting the Chronograph

If the chronograph hands do not return to “0”

position when the chronograph is reset

1. Pull out the crown to position (2).

2. Press button A adjusting the C.G 1/20 second

hand 6 at “0” position.

3. Press button B adjusting the C.G second hand at

“0” position (0560 only).

*Press continuously button A or B to quick advance

the C.G second hand 6 or C.G 1/20 second hand 3.

4. Set the watch to the current time.

5. Push the crown back to position (0).

6. Press the button B to reset minute/hour hand

(except 0540) at “0” position.

• Tachymeter

The tachymeter is the device which measures the

speed of an automobile. Knowing in how many

seconds the car covers a distance of 1km, the

meter can measure the approximate average

speed per hour during a journey (up to the

maximum measurable range of, 60 seconds.)

If the chronograph is started at the same time as

measurement, and stopped after 1km, the average

speed per hour can be determined, according to

the position of the second hand. If the car covers

the distance of 1km in 45 seconds, the average

hourly speed during the journey will be about 80km.

• After Changing The Battery

After changing the battery, please refer to the

• Adjusting The Chronograph section and set the

correct chronograph hands position prior to use.

*This operation is required because the chronograph

hands may not return to the “0” position when the

chronograph is reset after changing the battery.

0510

0540

0560

Produkt Specifikationer

Mærke:	Citizen
Kategori:	Ur
Model:	Cal 0540

Har du brug for hjælp?

Hvis du har brug for hjælp til Citizen Cal 0540 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Citizen Manualer

Citizen Cal 411X Manual

6 Oktober 2024

Citizen CAL B800 Manual

4 Oktober 2024

Citizen CAL U700 Manual

4 Oktober 2024

Citizen CAL 4633 Manual

4 Oktober 2024

Citizen CAL 9510 Manual

23 September 2024

Citizen CAL H461 Manual

22 September 2024

Citizen CAL H360 Manual

20 September 2024

Citizen CAL F900 Manual

19 September 2024

Citizen CAL A660 Manual

15 September 2024

Citizen CAL E00X Manual

14 September 2024

Ur Manualer

Nyeste Ur Manualer

Orient Contemporary ER1U002B Manual

9 Juni 2025

Orient Sports UG1X007B Manual

8 Juni 2025

Orient Sports UY07001D Manual

8 Juni 2025

Orient Classic RA-KA0007L Manual

7 Juni 2025

Orient Contemporary ER2G002B Manual

7 Juni 2025

Orient Contemporary UNA1003B Manual

6 Juni 2025

Orient Contemporary ER1Y001W Manual

6 Juni 2025

Orient Contemporary SZ3N009W Manual

6 Juni 2025

Swatch Climber SFK300G Manual

6 Juni 2025

Orient Contemporary UNG8003W Manual

6 Juni 2025