Citizen Tsuyosa Automatic NJ0150-56E Manual

Citizen Ur Tsuyosa Automatic NJ0150-56E

Læs gratis den danske manual til Citizen Tsuyosa Automatic NJ0150-56E (1 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Citizen Tsuyosa Automatic NJ0150-56E, eller vil du spørge andre brugere om produktet?

Side 1/1
1/1
41xx/82xx/83xx/901x/904x Abbreviated instruction
To see details of specifications and operations, refer to the instruction manual:
41xx/82xx/83xx instruction manual 901x instruction manual 904x instruction manual
English
Component identification
Crown's position
0 1 2
Second hand
Calendar
(Date indication/
Day of week indication)
Crown
Hour hand
Minute hand
Actual appearance may differ from the illustration.
The crown has two positions when pulling it out.
Some models have no calendar.
Some calendar models do not have day of week
indication.
Models with no calendar do not have position
2
of the
crown.
Winding the mainspring
Winding the mainspring manually
1.
Push the crown in to position 0.
2.
Turn the crown clockwise to wind the mainspring.
Rub the lower side of the crown down below with the ball of a finger to turn
it.
When the watch stops, turning the crown about 40 times will wind the
mainspring fully.
Turning the crown further after full winding up does not damage the main
spring.
When using an automatic model
The mainspring is wound automatically by the oscillating weight moved with
swings of your arm.
If you do not move your arm much, the mainspring may not be wound
sufficiently.
Once the mainspring is wound fully, 41xx and 82xx will run for about 40 hours
and 90xx about 42 hours.
The mainspring is wound for running of 1 day of the watch when you wear it 8
hours or more a day.
Setting the time and calendar (41xx, 82xx and 83xx)
Setting the time
Change of date indication shows it just became AM. Take care the time set is
AM or PM.
1.
Pull the crown out to position 2.
(For models without a calendar: Position 1)
Depending on the model, the second hand stops.
2.
Rotate the crown to set the time.
3.
Push the crown in to position 0 to finish the procedure.
Setting the calendar
Do not adjust the date indication while the watch shows 9:00 PM ‒ 4:30 AM.
Otherwise, the date indication may change incorrectly thereafter.
Date indication adjustment is required on the first days of March, May, July,
October and December.
1.
Pull the crown out to position 1.
2.
Rotate the crown counterclockwise to set the date.
3.
Rotate the crown clockwise to set the day-of-week.
For models with bilingual day-of-week indications:
Day-of-week indication in each language appears alternately. Set the day
in the language you prefer, and the day will be indicated in the language
hereafter.
4.
Push the crown in to position 0 to finish the procedure.
Setting the time and calendar (901x and 904x)
Do not adjust the date indication while the watch shows 8:00 PM ‒ 2:00 AM.
Otherwise, the date indication may change incorrectly thereafter.
Date indication adjustment is required on the first days of March, May, July,
October and December.
1.
Pull the crown out to position 1.
2.
Turn the crown clockwise to set the date to that which is one
day before the day you want to set.
3.
Pull the crown out to position 2.
4.
Rotate the crown counterclockwise until the date you want to
set is indicated.
Change of date indication shows it just became AM.
5.
Rotate the crown to set the time.
Move the hands beyond 12 oclock when you want to set time of PM.
6.
Push the crown in to position 0 to finish the procedure.


Produkt Specifikationer

Mærke: Citizen
Kategori: Ur
Model: Tsuyosa Automatic NJ0150-56E

Har du brug for hjælp?

Hvis du har brug for hjælp til Citizen Tsuyosa Automatic NJ0150-56E stil et spørgsmål nedenfor, og andre brugere vil svare dig