ClimeMET CM2030 Manual

ClimeMET Måleudstyr CM2030

Læs gratis den danske manual til ClimeMET CM2030 (2 sider) i kategorien Måleudstyr. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 16 anmeldelser. Har du et spørgsmål om ClimeMET CM2030, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Battery Change:

We recommend replacing the battery in the unit

on an annual basis to ensure optimum accuracy

of the unit. Your device will also display a low

battery indicator on the screen.

Maintenance:

• Avoid placing the anemometer in areas

prone to vibration and shock as these may

damage the instrument and result in

inaccurate readings.

• Avoid exposure to sudden changes in

temperature such as direct sunlight,

extreme cold and wet or moist conditions.

• When cleaning the display and casing, use

a soft damp cloth only.

• Opening or tampering with the inner

workings of the instrument may invalidate its

warranty.

Liability Disclaimer:

• The manufacturer and supplier cannot

accept any responsibility for any incorrect

readings and any consequences that occur

should an inaccurate reading take place.

• This product is not to be used for medical

purposes or for public information.

• This product is not a toy.

Specications:

CM2030 User Guide

ClimeMET is a small, family-run business specialising

in home and garden weather instruments. We’re a

team of outdoor enthusiasts made up of cyclists,

surfers, dog walkers and kayakers, and we design

our unique range of products from our workshop

in rural Suolk.

Your new CM2030 Handheld Anemometer provides

wind speed data for any outdoor activity. Operation

is straightforward but to get the most out of your

CM2030, please take time to familiarise yourself

with the features by reading this User Guide.

This manual should be kept in a safe place for

future reference as it contains important notes

on the setup and operation of your ClimeMET

instrument.

Features:

> Current wind speed measurements

> Also displays average and maximum wind

speeds

> Wind speed unit selectable: m/s, ft/m, knots,

km/h, mph, Beaufort

> Temperature display in °C or °F

> Current wind chill

> Backlight with auto-o feature

> Battery saving auto-o feature

> Low battery warning

Setting Up:

1. Firstly, use a screwdriver or rm hand to

open the battery cover at the back of the

anemometer.

2. Checking the correct polarization, insert

the 1 x 3V lithium cell (CR2032) into the

battery compartment and replace the cover.

3. When the battery is inserted, all the

segments of the LCD will light up briey.

Your anemometer is now operational.

4. Press and hold the MODE button for

1 second to turn the device on.

After inserting the battery, test the anemometer

by blowing directly at the impeller for about 30

seconds. The reading on the LCD should change. If

this is not the case, remove the battery wait for 30

seconds and re-insert the battery again following

the above procedure.

Wind Speed Mode:

The wind speed can be displayed in ve dierent

scales: m/s, km/h, ft/min, knots, mph. A separate

Beaufort scale will also display at the side of the

screen.

1. To change the units, simply push MODE for 3

seconds until the “m/s” starts to blink.

2. Push SET to select the desired measurement

unit.

3. To conrm the desired measuring unit push

MODE.

Use the above method to change between “CU”

Current, “MAX” Maximum and “AVG” average wind

speed modes.

Temperature:

Press the central °C/°F button to display

temperature readings in either Celsius

or Fahrenheit.

Wind Chill:

If you hold your anemometer up when the wind

is blowing, the current wind chill will replace

your temperature reading on the screen. It is

calculated using a mathematical formula based on

wind speed and temperature. Please note, during

low wind speeds, there is virtually no noticeable

wind chill.

LCD Backlight:

The LCD backlight is automatically switched on for

12 seconds when any key is pressed.

Power On/O:

Press and hold the MODE button for 1 second to

turn the device on.

Press and hold the MODE and SET keys at the

same time for 3 seconds to turn the unit o.

Fastening The Wrist Lanyard:

A wrist lanyard is supplied with the anemometer.

1. To fasten simply insert the clip of the lanyard

into the buckle end of the anemometer until

it clicks into place.

2. To unfasten, simply press both sides of

the clip until it can be removed from the

buckle.

Produkt Specifikationer

Mærke:	ClimeMET
Kategori:	Måleudstyr
Model:	CM2030

Har du brug for hjælp?

Hvis du har brug for hjælp til ClimeMET CM2030 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måleudstyr ClimeMET Manualer

ClimeMET CM2030 Manual

31 August 2024

ClimeMET CM3505 Manual

31 August 2024

Måleudstyr Manualer

Nyeste Måleudstyr Manualer

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025