Conceptronic SPC01G Manual


Læs gratis den danske manual til Conceptronic SPC01G (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Conceptronic SPC01G, eller vil du spørge andre brugere om produktet?

Side 1/8
Mul Language Quick Guide
PCI Card 1-Port ParallelExpress
& 2-Port Serial
SPC01G
English
Conceptronic SPC01G
1. Package contents
Conceptronic 2-port serial & 1-port parallel PCI cardExpress
Product CD-ROM
This multi language quick guide
2. Installation & usage
Turn Off the power to your computer.
Unplug the power cord and remove your computer’s cover.
Remove available the slot bracket from an PCIe slot.
To install the bus card, card’s carefully align the connector selected with the PCIe slot on
the motherboard. Push the board down firmly.
Replace the slot bracket’s holding screw to secure the card.
Replace the computer cover and reconnect the power cord.
Your computer will show the “New Hardware Wizard” on your screen. You can ignore
this “New Hardware Wizard” by clicking “Cancel”.
Insert the CD-ROM in the optical drive of your computer. The AutoPlay option will be
shown automatically. Click on “Run Autorun.exe” to start the autorun menu.
Select “Install Drivers” and follow the onscreen instructions to install the required drivers
for serial the PCI card.e
When the driver installation is complete, restart your computer to ensure the drivers are
correctly loaded.


Produkt Specifikationer

Mærke: Conceptronic
Kategori: Ikke kategoriseret
Model: SPC01G

Har du brug for hjælp?

Hvis du har brug for hjælp til Conceptronic SPC01G stil et spørgsmål nedenfor, og andre brugere vil svare dig