Craftsman 48112 Manual


Læs gratis den danske manual til Craftsman 48112 (9 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Craftsman 48112, eller vil du spørge andre brugere om produktet?

Side 1/9
Operators Manual
Model 48112
WARNING: Before using this product,
read this Operators Manual and follow
all its Safety Rules and Operating
Instructions.
• Safety
• Operation
• Maintenance
Printed in China
2 Ton Low Prole
Floor Jack
Sears Brands Management Corporation, Ho󰀨man Estates, IL 60179 U.S.A.
www.craftsman.com
ASME PASE Compliant
CUSTOMER HELP LINE
Parts and Questions
1-888-332-6419
8:00 AM - 4:45 PM Central Time
Monday- Friday
2
NOTE: Repeat this Air Purge Procedure
whenever the jack displays reduced lifting
performance.
AIR PURGE PROCEDURE
IMPORTANT: BEFORE FIRST USE, perform the following Air Purge Procedure to remove any air that may
have been introduced into the hydraulic system as a result of product shipment and handling.
REMOVE COVER PLATE
Loosen and remove the four screws
securing cover plate to jack frame.
Remove cover plate to expose oil ll plug.
CLOSE RELEASE VALVE
Remove handle from handle socket. Place
handle back onto release valve. Fully close
release valve by turning handle clockwise
until it stops.
READY FOR USE
Remove handle from release valve. Insert
handle into handle socket. Jack is now
ready to use. Check for proper pump action.
OPEN RELEASE VALVE
Place the open end of the handle over the
release valve so that the narrow crosspiece
in the handle tip engages into the slot in the
valve. Turn the handle counterclockwise 2
full turns to fully open release valve.
RAPIDLY PUMP
Remove handle from release valve. Insert
handle into handle socket. Turn handle
slightly to right to engage pin in slot. Rapidly
pump the handle 6 - 8 times. Leave handle
in down position.
PURGE AIR
With a at blade screwdriver, push the oil ll
plug slightly to the side to purge trapped air
from system. You should hear a hiss.
REPLACE COVER PLATE
Secure cover plate back in place with the
four previously removed screws.
1
2
3
4
5
7
6
CUSTOMER HELP LINE
Parts and Questions
1-888-332-6419
8:00 AM - 4:45 PM Central Time
Monday- Friday
Oil Fill Plug
(Not shown, on
reservoir)
Engage
release valve
with this end
Cover plate
(Remove to access
Oil Fill Plug)
Handle
socket
Lifting
arm
Saddle
Front
wheel
Release
valve
Jack
handle
Caster


Produkt Specifikationer

Mærke: Craftsman
Kategori: Ikke kategoriseret
Model: 48112

Har du brug for hjælp?

Hvis du har brug for hjælp til Craftsman 48112 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Craftsman Manualer

Craftsman

Craftsman CMCSS800 Manual

1 Februar 2025
Craftsman

Craftsman CMHT77621 Manual

14 September 2024
Craftsman

Craftsman CMCED400 Manual

5 September 2024
Craftsman

Craftsman 316.292631 Manual

4 September 2024
Craftsman

Craftsman 98021SE Manual

4 September 2024
Craftsman

Craftsman CMCW211 Manual

3 September 2024
Craftsman

Craftsman CMSTC4VT Manual

3 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer