Craftsman CMCA320 Manual

Craftsman Boremaskine CMCA320

Læs gratis den danske manual til Craftsman CMCA320 (6 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 62 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 31.5 anmeldelser. Har du et spørgsmål om Craftsman CMCA320, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/6
IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.
POUR TOUTE QUESTION OU TOUT COMMENTAIRE, NOUS CONTACTER.
SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS.
1-888-331-4569 WWW.CRAFTSMAN.COM
CMCA320
INSTRUCTION MANUAL GUIDE D’UTILISATION MANUAL DE INSTRUCTIONES
20V* Max Cordless Multi-Use Garden Tool
Outil de jardin multifonction sans fil 20 V* max
Herramienta para jardín multiusos inalámbrica 20V* Max
English
4
c ) Keep children and bystanders away while
operating a power tool. Distractions can cause you
to losecontrol.
2) Electrical Safety
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electricshock.
b ) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed orgrounded.
c ) Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electricshock.
d ) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electricshock.
e ) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electricshock.
f ) If operating a power tool in a damp location
is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of a GFCI
reduces the risk of electricshock.
3) Personal Safety
a ) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personalinjury.
b ) Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non‑skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personalinjuries.
c ) Prevent unintentional starting. Ensure the switch
is in the off‑position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energizing power tools that have the switch
on invitesaccidents.
d ) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personalinjury.
e ) Do not overreach. Keep proper footing and
balance at all times. This enables better control of the
power tool in unexpectedsituations.
f ) Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewelry or long hair
can be caught in movingparts.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with
this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
seriousinjury.
SAVE ALL WARNINGS
AND INSTRUCTIONS FOR
FUTUREREFERENCE.
The term “power tool” in the warnings refers to your
mains‑operated (corded) power tool or battery‑operated
(cordless) powertool.
1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark
areas inviteaccidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust orfumes.
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert
symbols and words to alert you to hazardous situations and
your risk of personal injury or propertydamage.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, result in will death or
seriousinjury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, result in could death or
seriousinjury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, result in may minor or
moderateinjury.
(Used without word) Indicates a safety relatedmessage.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.
Intended Use
Your CRAFTSMAN CMCA320 has been designed for household,
consumer useonly. This tool can be used to assist with:
‑Planting small trees, shrubs and flowers
‑Cultivating and preparing garden soil
‑Digging holes for small posts or fencing
DO nOT use on ice.
DO nOT use to mix liquids, chemicals or paint.
DO nOT use under wet conditions or in presence of
flammable liquids orgases.
DO nOT let children come into contact with the tool. Supervision
is required when inexperienced operators use thistool.
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.
WARNING: To reduce the risk of injury, read the
instructionmanual.

Produkt Specifikationer

Mærke: Craftsman
Kategori: Boremaskine
Model: CMCA320

Har du brug for hjælp?

Hvis du har brug for hjælp til Craftsman CMCA320 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Boremaskine Craftsman Manualer

Craftsman

Craftsman 351.217480 Manual

28 Juni 2024
Craftsman

Craftsman CMCD710C1 Manual

14 November 2023
Craftsman

Craftsman CMED731 Manual

27 August 2023
Craftsman

Craftsman CMCA320 Manual

3 August 2023
Craftsman

Craftsman CMCD720B Manual

16 Maj 2023

Boremaskine Manualer

Nyeste Boremaskine Manualer

Kraftronic

Kraftronic KT-AS 3,6 Li Manual

18 Juni 2025
Mafell

Mafell BST 650 S Manual

17 Juni 2025
Mafell

Mafell BST 320 Manual

17 Juni 2025
Smart365

Smart365 SM-04-01116 Manual

16 Juni 2025
DeWalt

DeWalt DCK240C2 Manual

16 Juni 2025
Smart365

Smart365 SM-04-01082 Manual

15 Juni 2025
Draper

Draper 70257 Manual

8 Juni 2025
Draper

Draper 56382 Manual

8 Juni 2025
Draper

Draper Storm Force 89523 Manual

8 Juni 2025
Draper

Draper Storm Force 56360 Manual

8 Juni 2025