Craftsman CMSTE8VT Manual

Craftsman Ikke kategoriseret CMSTE8VT

Læs gratis den danske manual til Craftsman CMSTE8VT (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Craftsman CMSTE8VT, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
ENGLISH
Versatrack™
WARNING: To reduce the risk of serious personal
injury, do not use a damaged Versatrack™ hook or
Versatrack™ Trackwall. A damaged Versatrack™ hook
or Versatrack™ Trackwall will not support the weight
of the tool.
WARNING: To reduce the risk of serious personal
injury, ensure the screw holding the Versatrack™ hook
is securely tightened.
WARNING: To reduce the risk of serious personal
injury, ensure the fitting holding the hang hook
issecure.
WARNING: To reduce the risk of serious personal
injury, DO NOT suspend tool overhead or suspend
objects from the hook. ONLY suspend tool on the
Versatrack™ Trackwall using the hook.
WARNING: Ensure that the tool weight does not
exceed the maximum rated weight of 20 lb (9 kg) for
the selected Versatrack™ hook.
WARNING: When hanging objects on a Versatrack™
Trackwall rail, adequately space the tools in order to
not exceed 75 lb (35 kg) per linear foot.
NOTE: Versatrack™ accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN, call 1-888-331-4569.
Cordless (Fig. A)
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can causeinjury.
IMPORTANT: When attaching the Versatrack™ hang
hook, use only the screw that is provided. Be sure to
securely tighten the screw. Versatrack™ accessories
mount compatible tools securely to the Versatrack™
Trackwallsystem.
1. Turn tool off, remove the battery pack and
removeaccessories.
CAUTION: Any product with exposed cutting teeth
must have them covered securely if it is to be on
theVersatrack™ Trackwall.
2. Attach the hang hook on the tool.
a. Place the Versatrack™ hang hook 1 onto the
mounting location at the base of the tool as shown.
b. Use a screwdriver to secure the hang hook with
the provided screw 2 . Do not use any other screw
forthis.
1
Fig. A
2
Corded (Fig. B)
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can causeinjury.
IMPORTANT: Versatrack™ accessories mount compatible
tools securely to the Versatrack™ Trackwallsystem.
1. Turn tool off, disconnect it from power source and
removeaccessories.
CAUTION: Any product with exposed cutting teeth
must have them covered securely if it is to be on
theVersatrack™ Trackwall.
2. Mount the peg hook 3 to the Versatrack™ Trackwall
with the CRAFTSMAN logo properly oriented as shown.
3. Slide the tool loop 4 to the base of the peg hook.
NOTE: Ensure that the tool loop slides all the way to the
base of the peg hook. This relieves strain on the peg hook
and trackwall and may prevent the tool from falling.
Fig. B
3
4
Pneumatic (Fig. C)
WARNING: To reduce the risk of serious personal
injury, remove the air supply before making any
adjustments or removing/installing attachments
or accessories. An accidental actuation can
causeinjury.
IMPORTANT: Versatrack™ accessories mount compatible
tools securely to the Versatrack™ Trackwallsystem.
1. Remove the air supply and accessories.
INSTRUCTION MANUAL
MANUEL D’INSTRUCTIONS
MANUAL DE INSTRUCCIONES
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY CRAFTSMAN TOOL, CALL US TOLL FREE AT:
888-331-4569.

Produkt Specifikationer

Mærke: Craftsman
Kategori: Ikke kategoriseret
Model: CMSTE8VT

Har du brug for hjælp?

Hvis du har brug for hjælp til Craftsman CMSTE8VT stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Craftsman Manualer

Craftsman

Craftsman CMCHT830 Manual

12 November 2025
Craftsman

Craftsman CMXCAFG190682 Manual

7 September 2025
Craftsman

Craftsman CMCPPR320 Manual

17 Juli 2025
Craftsman

Craftsman CMCL050 Manual

17 Juli 2025
Craftsman

Craftsman CMCSS800 Manual

1 Februar 2025
Craftsman

Craftsman CMXGVAM1144043 Manual

16 September 2024
Craftsman

Craftsman CMHT77621 Manual

14 September 2024
Craftsman

Craftsman CMCED400 Manual

5 September 2024
Craftsman

Craftsman 316.292631 Manual

4 September 2024
Craftsman

Craftsman 98021SE Manual

4 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Opticis

Opticis OHM-44UHD Manual

7 December 2025
SkyRC

SkyRC RTS001 Manual

7 December 2025
Advantech

Advantech MIC-332AO Manual

7 December 2025
Bosch

Bosch WAN2827FFR Manual

7 December 2025
Jonsbo

Jonsbo NC-2 Color Manual

7 December 2025
SkyRC

SkyRC SK-500039 Manual

7 December 2025
Fostex

Fostex FE108SS-HP Manual

7 December 2025
MDT

MDT BE-TA550406.02 Manual

7 December 2025
Opticis

Opticis OVD18 Manual

7 December 2025
NOCH

NOCH TERRA-FORM Manual

7 December 2025