Craftsman GHT500S Manual

Craftsman Hækkeklipper GHT500S

Læs gratis den danske manual til Craftsman GHT500S (8 sider) i kategorien Hækkeklipper. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Craftsman GHT500S, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
Operator’s Manual
CAUTION: Read, understand and follow all
Safety Rules and Operating Instructions in this
Manual before using this product.
• WARRANTY
• SAFETY
• ASSEMBLY
• OPERATION
• MAINTENANCE
• PARTS LIST
• ESPAÑOL
20-in. 4.2 Amp
Electric
Hedge Trimmer
Model No. 172.797740
final Eng.
11-13
4
SAFETY INSTRUCTIONS
WARNING:
If correctly used, this electric Hedge Trimmer is an efficient
tool to use; if used improperly or without the due precautions it could become a
dangerous tool. For pleasant and safe work, ALWAYS strictly comply with the safety
rules that are contained in this manual.
!
WARNING:
BE SURE to read and understand all instructions in this manual
before using this electric Hedge Trimmer. Failure to follow all instructions listed
below may result in electric shock, fire an or serious personal injury.d /
!
WARNING:
To avoid mistakes that could cause serious injury, DO NOT
connect the Hedge Trimmer to the power source until the following instructions
have been read and understood.
!
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term power tool in the warnings refers to your electric (corded) power tool or battery-operated
(cordless) power tool.
WORK AREA SAFETY
• Avoid Dangerous Environment - Don't use appliances in damp or wet locations.
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with grounded power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
• Avoid body contact with grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
• Do Not Abuse Cord - Never carry appliance by cord or yank it to disconnect from receptacle.
Keep cord from heat, oil, and sharp edges.
Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
• Operating a power tool in a damp location is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an GFCI reduces the risk of electric shock.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING:
Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
!
SAFETY INSTRUCTIONS cont.
Safety Helmet
Protection
Eye
Protection
Heavy Duty
Gloves
Hearing
Protection
Safety Shoes
Safety Chaps
Snug Fitting
Clothing
• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
power source and/or battery pack, picking up or carrying the tool. Carrying power tools with
your finger on the switch or energizing power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or
a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce
dust-related hazards.
PERSONAL SAFETY
• Don't grasp the exposed cutting blades or cutting edges when picking up or holding
the appliance or power tool.
• Don't Force Applianc Power Tool - It will do the job better and with less likelihood of ae/
risk of injury at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts
and any other condition that may affect the power tools operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Maintain Appliance With Care - Keep cutting edge sharp and clean for best performance and to
reduce the risk of injury. Follow instructions for lubricating and changing accessories.
Inspect appliance cord periodically, and if damaged, have it repaired by an authorized service facility.
Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free
from oil and grease.
• Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
POWER TOOL USE AND CARE SAFETY
SERVICE
• Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
5

Produkt Specifikationer

Mærke: Craftsman
Kategori: Hækkeklipper
Model: GHT500S

Har du brug for hjælp?

Hvis du har brug for hjælp til Craftsman GHT500S stil et spørgsmål nedenfor, og andre brugere vil svare dig


Hækkeklipper Craftsman Manualer

Craftsman

Craftsman CMCHT98022D1 Manual

20 August 2024
Craftsman

Craftsman CMCHTS820B Manual

1 August 2024
Craftsman

Craftsman CMEHTS824 Manual

22 Juli 2024
Craftsman

Craftsman CMEHTS822 Manual

6 April 2024
Craftsman

Craftsman GHT500S Manual

14 November 2023
Craftsman

Craftsman CMCPHT818B Manual

24 Maj 2023
Craftsman

Craftsman CMCHT810 Manual

21 Maj 2023
Craftsman

Craftsman CMEHT150 Manual

18 November 2022

Hækkeklipper Manualer

Nyeste Hækkeklipper Manualer

Milwaukee

Milwaukee M18 Fuel 3033-21 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 3034-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 3043-20 Manual

12 August 2025
Milwaukee

Milwaukee M18 Fuel 3033-20 Manual

12 August 2025
Milwaukee

Milwaukee M18 Fuel 3001-20 Manual

12 August 2025
Fieldmann

Fieldmann FZN 70225-0 Manual

12 August 2025
AL-KO

AL-KO HTA 2050 Manual

12 August 2025
Makita

Makita DUP180 Manual

12 August 2025
Worx

Worx Nitro WG330E Manual

11 August 2025
GMC

GMC HT710 Manual

9 August 2025