Cranborne Audio Carnaby 500 Manual

Cranborne Audio Ikke kategoriseret Carnaby 500

Læs gratis den danske manual til Cranborne Audio Carnaby 500 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Cranborne Audio Carnaby 500, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

5. OUTPUT LEVEL CONTROL

[±20dB, 1dB steps]

Adjusts the output level of the module

post processing. Set in accordance to

the INPUT LEVEL CONTROL [1] to

maintain unity through the module.

1. INPUT LEVEL CONTROL

[±20dB, 1dB steps]

Adjusts the input level of the module and

internal saturation circuits. Set around 0dB

for nominal settings or push higher for more

harmonic saturation.

2. HI LEVEL CONTROL

[±10dB, 0.5dB steps]

Adjusts up to 10dB of boost/cut for the

high

shelf lter

at the frequency set using the HI

FREQUENCY CONTROL [7]. This control

progressively increases the amount of

harmonic saturation added to the signal

above the selected frequency in boost and

cut positions.

3. MID LEVEL CONTROL

[±10dB, 0.5dB steps]

Adjusts up to 10dB of boost/cut for the

mid

peaking lter

at the frequency set using the

MID FREQUENCY CONTROL[9]. This control

progressively increases the amount of

harmonic saturation added to the signal

within the selected frequency in boost and

cut positions.

4. LO LEVEL CONTROL

[±10dB, 0.5dB steps]

Adjusts up to 10dB of boost/cut for the

low

shelf lter

at the frequency set using the lo

FREQUENCY CONTROL [10]. This control

progressively increases the amount of

harmonic saturation added to the signal

above the selected frequency in boost and

cut positions.

10. LO FREQUENCY CONTROL

[20Hz - 420Hz]

Adjusts the corner frequency of the

low

frequency shelf lter

and sets the start

frequency where the harmonic saturation is

ltered into the dry signal.

9. MID FREQUENCY CONTROL

[200Hz - 6.2kHz]

Adjusts the mid-point frequency of the

mid

peaking lter

and sets the start frequency

where the harmonic saturation is ltered

into the dry signal.

7. HI FREQUENCY CONTROL

[5kHz - 25kHz]

Adjusts the corner frequency of the

high

frequency shelf lter

and sets the start

frequency where the harmonic saturation is

ltered into the dry signal.

12. IN SWITCH

[ OFF - ON]

Switches the module IN and OUT of the entire

circuit. LED will illuminate BLUE when the

unit is switched IN. LED will illuminate WHITE

when module is IN and slaved via OPTOSYNC.

11. OPTOSYNC SWITCH

[ OFF - ON]

Switches OPTOSYNC ON or OFF. When the

switch is ON, the module syncs its physical

controls to a second Carnaby 500 to its left.

When ON, the IN LED changes to WHITE and

pulses when controls are adjusted on the

master module. Multiple modules can be

synced for surround mastering or summing.

6. SIGNAL INDICATOR

[RGB LED]

Displays the

output

level of the module post

OUTPUT LEVEL CONTROL [5]. LED lights

GREEN from -12dBu and [CLIP] atRED

+24dBu.

8. BAND SATURATION INDICATOR

[RGB LED]

Indicates how hard the saturation stages are

being driven and how much harmonic

saturation is being added to the dry signal

for each Harmonic EQ

band. LEDs start

illuminating at 3% THD measured at the~

output.

Produkt Specifikationer

Mærke:	Cranborne Audio
Kategori:	Ikke kategoriseret
Model:	Carnaby 500

Har du brug for hjælp?

Hvis du har brug for hjælp til Cranborne Audio Carnaby 500 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Cranborne Audio Manualer

Cranborne Audio Carnaby 500 Manual

15 Juni 2025

Cranborne Audio N22H Manual

4 September 2024

Cranborne Audio Carnaby HE2 Manual

1 September 2024

Cranborne Audio Camden EC1 Manual

26 August 2024

Cranborne Audio 500R8 Manual

19 Juni 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Festo DFM-32-100-B-PPV-A-KF Manual

17 Juni 2025

Playtive IAN 285777 Manual

17 Juni 2025

Festo VAEM-L1-S-M3-26 Manual

17 Juni 2025

Festo DFPC-320 Manual

17 Juni 2025

EFX ICAK12 Manual

17 Juni 2025

Bearware 307294 Manual

17 Juni 2025

Futaba MC-9200H/A Manual

17 Juni 2025

Hansgrohe AXOR Montreux 16517800 Manual

17 Juni 2025

OmniMount 2N1-S Manual

17 Juni 2025

Festo DSNU-S-12- -F1A Manual

17 Juni 2025