Cres Cor H138NPSCC3MQ Manual

Cres Cor Ikke kategoriseret H138NPSCC3MQ

Læs gratis den danske manual til Cres Cor H138NPSCC3MQ (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Cres Cor H138NPSCC3MQ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

5925 Heisley Road • Mentor, OH 44060-1833

Holding Cabinet

FL-2331

Rev. 3 (3/14) Page 1 of 7

Cabinet model number:

Cabinet serial number:

Authorized Service Agency:

Ph: Fax:

Keep this manual for future reference.

OPERATING and MAINTENANCE INSTRUCTIONS

Models: H138NPSCMQ Series Hot Cabinet

and H138NPSCMQ-15A Series Hot Cabinet

5925 Heisley Road • Mentor, OH 44060-1833

Holding Cabinet

FL-2331

Rev. 3 (3/14) Page 2 of 7

ELECTRICAL SPECIFICATIONS:

Model No. Volts Watts Amps Hertz Phase NEMA

H138NPSC

120 2000 16.6 60 1 5-20P

H138NPSC-15A

120 1500 12.5 60 1 5-15P

Note: The above model numbers are basic models. They will be followed by numbers and letters.

INSTALLATION:

1. Remove all paper and packing material from

inside of cabinet.

2. Remove protective paper and vinyl material from

outside surfaces of cabinet.

3. Place the cabinet in a well-ventilated area.

4. Place cabinet on level oor.

5. Plug cord end into proper wall outlet.

Blower inlet guard must be in place before

operating cabinet.

WARNING

OPERATING and MAINTENANCE INSTRUCTIONS

Models: H138NPSC Series Hot Cabinet

WARNING

Air is VERY HOT

when door is opened.

FIRST TIME START-UP:

1. Push the POWER switch to “ON”, and run the

unit for one hour.

NOTE: DO PUT FOOD INTO CABINET!NOT

This step is to burn off manufacturing oils and excess

adhesive.

2. Let the cabinet cool and wipe inside clean with

detergent and hot water before rst use.

HOW TO HOLD:

1. Push POWER switch to “ON.” Yellow POWER

LIGHT will come on.

2. Push the “SET” button on the TEMPERATURE

CONTROL. The TEMPERATURE DISPLAY will

show “SP1” (set point 1).

3. Press “SET” again and the current set point temperature

will be displayed.

4. Press the  ADJUST buttons to adjust to the

desired temperature.

5. Press “SET” to save the temperature setting.

6. Preheat cabinet for 45 minutes.

7. Put product into cabinet.

NOTE: Proper food holding temperature is

140°F/60°C or higher.

ADJUST

°F

SET

POWER

LIGHT

POWER

SWITCH

ADJUST

BUTTONS

TEMPERATURE

DISPLAY

“SET” BUTTON

TEMPERATURE

CONTROL

Produkt Specifikationer

Mærke:	Cres Cor
Kategori:	Ikke kategoriseret
Model:	H138NPSCC3MQ

Har du brug for hjælp?

Hvis du har brug for hjælp til Cres Cor H138NPSCC3MQ stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Cres Cor Manualer

Cres Cor H137SUA6D Manual

20 August 2025

Cres Cor H137UA9D Manual

20 August 2025

Cres Cor 131UA11D Manual

20 August 2025

Cres Cor H137UA12D Manual

20 August 2025

Cres Cor 1000HHSS2DX Manual

20 August 2025

Cres Cor H138NPSCC3MQ Manual

20 August 2025

Cres Cor H135WSUA11 Manual

20 August 2025

Cres Cor 121PH1818D Manual

20 August 2025

Cres Cor H137WSUA6D Manual

20 August 2025

Cres Cor H137WSUA5D Manual

20 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Tefal Lighted Mirror MR4015 Manual

20 August 2025

Stiebel Eltron CWM P Manual

20 August 2025

Globe XPH Manual

20 August 2025

Accucold AWC2PB Manual

20 August 2025

Scheppach CSP5300 SE Manual

20 August 2025

AccuTemp Evolution N61201D060 Manual

20 August 2025

Scheppach C-BSB74/1BE-X Manual

20 August 2025

Deye SUN-7.6K-SG02LP2-EU-AM2 Manual

20 August 2025

Scheppach Therbio Manual

20 August 2025

Krups Pulseo KB17GD Manual

20 August 2025