Crest Audio Versarray PRO 215 Manual

Crest Audio Højttaler Versarray PRO 215

Læs gratis den danske manual til Crest Audio Versarray PRO 215 (64 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Crest Audio Versarray PRO 215, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/64
1
Versarray™ Pro 215
Powered Enclosure
Product Specifications
e Crest Audio® Versarray™ Pro 215 Sub Powered Subwoofer speaker system consists of a pair of Peavey® 15” Low Rider® woofers combined with a super-
solid cabinet with a simple, quick, yet exible rigging system. Designed to provide modular coverage of small to medium venues, and intended for use with
the companion Crest Audio® Versarray™ Pro 112 models, the Versarray™ Pro 215 Sub oers excellent versatility with a very high performance capability. e
subwoofer system consists of the following woofer components: a pair of Peavey® 15” Low Rider® series woofers with a very long throw 4” voice coil structure.
Capable of over 800W of continuous power handling (AES Std 2-1984) each, these woofers can project a lot of low frequency energy.
e Versarray™ Pro 215 Sub incorporates Peavey’s UniVent™ air pumping venting technology. e UniVent™ venting system literally pumps air through the
enclosure, exchanging the stale hot air inside the cabinet for the cooler outside air. is helps keep the woofer operating temperatures from getting so high, and
increases reliability and reduces power compression under heavy continuous drive conditions. e air pumping action is achieved without excessive turbulence
or any signicant net asymmetry of total vent air ow.
Power for both woofers is supplied by some very ecient power amplier systems, controlled by a sophisticated and rened DSP operations system with Dante
connection capability. Total system power is 3000W total peak power, with 1500W total sine wave power for the woofers. is sheer power is controlled pre-
cisely and processed by a high performance DSP system, which provides all the crossover and EQ functions, as well as providing all limiting, compression and
driver protection duties with unfailing attention to every detail of the music.
e adjustable rigging system provides for hanging multiple Crest Audio® Versarray™ Pro 112 cabinets below a single Sub, or multiple Subs. Quick-lock pins
are supplied with the rigging hardware to couple the Versarray™ Pro 215 Subs together, and to the rigging Halo and Frames. e exibility of the Versarray™
FlyQWIK™ system allows the use of anywhere from 1 to 7 Versarray™ Pro 215 Subs in conjunction with an appropriate number of Versarray™ Pro 112 cabinets.
An optional special Sub Support Frame rigging adaptor mounts to the Versarray™ Pro 215 Sub, and allows Versarray™ Pro 112’s to be own below the Sub, with
the Sub being own from a Crest Audio® Versarray™ Halo. See Crest Audio® Model Versarray™ Mk3 Halo Spec Sheet for details of the allowable mix of Versar-
ray™ Subs to 2-ways.
Features
•Dual Woofer Subwoofer SR System
• 3000 Total Peak watts of system power
• 15” Low Rider® 4” VC Peavey® Woofer
• Peavey’s UniVent™ air pumping venting technology
• Power amp is fan cooled for maximum reliability
• Easy FlyQWIK™ hardware rigging system
• Full complement of DSP based limiting and compression to protect the drivers from overdrive conditions
• Inputs are analog XLR in and/or Dante Ethernet audio network in.
• Analog Output ru connector is a male XLR
• 18 mm 13 ply Baltic Birch enclosure
• Hammerhead™ polyurea black nish and black powder-coated cloth lined grilles
• PowerCON® TRUE1 TOP Input and ru AC power connections
• Comes with PowerCON® AC cords, one AC outlet to Sub, and one jumper cord.
• Has rubber feet for oor use when not own
2
Frequency Response, 1 meter
on-axis, swept-sine in anechoic
Environment (-6 dB):
35 Hz – 125 Hz
Useable Low Frequency Limit
(-10 dB anechoic): 33 Hz
Power Amp Rating, Total Power
Output:
3,000 watts* total peak available
power
Sine wave Power: 1,500 watts*
total
*Output duration is limiter
controlled
Sound Pressure Level, 1 Watt, 1
meter in anechoic environment:
101 dB SPL (Both
speakers driven with 1 watt)
Maximum Sound Pressure Level
(1 meter):
Anechoic environment: 130 dB
SPL continuous
(flown)
133 dB SPL peak
One half space: 136 dB
SPL continuous
(on floor)
139 dB SPL peak
Transducer Complement:
Dual 15” Peavey® Low Rider® 4
ohm woofers, 4” voice coil
Box Tuning Frequency:
36 Hz
Electronic Crossover:
DSP based, Crossover Frequency:
125 Hz
Low Pass slope: 24 dB/octave
Infrasonic Filter Slope:
36 dB/octave, staggered poles
Transducer Impedance (Z):
Low Frequency Nominal (X2): 4
ohms each woofer
Signal Input Connections:
Analog XLR in and/or Dante
Ethernet audio network in.
Enclosure Materials & Finish:
18 mm 13 ply Baltic Birch
plywood finished in a tough
Hammerhead™ polyurea black
finish, with a perforated steel
grille finished in black powder
coat paint and a cloth liner inside.
Inner steel frame and backing
plates for rigging hardware.
Mounting provisions: Custom
array brackets and hardware, and
a custom array rigging system
are included with each cabinet.
10mm quick release pins are
included with each cabinet,
conveniently affixed using wire
rope lanyards.
Dimensions (H x W x D):
32.75 in. x 25.13 in. x 21.25 in.
832 mm x 638 mm x 540 mm
With Rigging hardware and Pins:
32.75 in. x 27.23 in. x 21.25 in.
832 mm x 692 mm x 540 mm
Net Weight: 161 Lbs. (73.2 kg)
{includes all cabinet associated
rigging hardware for each cabinet,
including quick-loc pins, etc}
Companion Speaker Models (sold
separately):
Crest Audio® Versarray™ 112 Pro
Powered Line Array SR System
with dual ribbon tweeters, 2-way
Crest Audio® Versarray™ 218 Pro
Powered Sub with double 18”
LowRider® woofers subwoofer.
Additional Power Amp
Specifications
THD: Typically less than 0.1%
AC Power Input: Universal
power supply 120–240 VAC, 50
to 60 Hz
DSP Section Specifications:
Sampling frequency: 48 kHz
Bit Depth: 24 bits for ADC/DAC
Latency: 3.5 ms typical
Architectural and Engineering
Specifications
The loudspeaker system shall
have an operating bandwidth of
35 Hz to 125 Hz, measured on
axis at 1 meter in a half-space
environment, with +3/- 6 dB
tolerance. The maximum peak
output level shall be 139 dB when
measured at a distance of one
meter with full system output.
The woofers loaded into the
cabinet shall be two Peavey® Low
Rider® 18” 4 ohm woofers, rated
at 800W continuous power per
AES Std. 1984-2. The enclosure
vents shall incorporate the
Univent™ air pumping system to
aid cool air circulation through
the cabinet.
The powered speaker amplifiers
shall have a total power output
of 1500 watts sine wave, and the
power amp shall be fan cooled.
Signal input shall be provided
via XLR analog and Dante
Ethernet connections. DSP signal
processing shall be incorporated
to provide the crossover,
protective filtering and EQ for
the system, as well as limiting
and compression to minimize
overdrive distortion.
The cabinet shall incorporate
rigging hardware to interface
with the Crest Audio® Versarray™
FlyQWIK™ rigging system, and
the 10 mm locking quick release
pins required to interface to the
FlyQWIK™ hardware shall be
included with the cabinet.
The outside dimensions shall be
32.75 inches high by 25.13 inches
wide by 21.25 inches deep. The
weight shall be 161 pounds. The
loudspeaker system shall be a
Crest Audio® model Versarray™
Pro 215 Sub.
SPECIFICATIONS Versarray
™
PRO 215

Produkt Specifikationer

Mærke: Crest Audio
Kategori: Højttaler
Model: Versarray PRO 215

Har du brug for hjælp?

Hvis du har brug for hjælp til Crest Audio Versarray PRO 215 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler Crest Audio Manualer

Crest Audio

Crest Audio CPL 10+ Manual

14 December 2024
Crest Audio

Crest Audio Versarray PRO 215 Manual

16 August 2024
Crest Audio

Crest Audio CPL 6T Manual

2 August 2024
Crest Audio

Crest Audio CPL 265B+ Manual

1 August 2024
Crest Audio

Crest Audio CPL 8+ Manual

31 Juli 2024
Crest Audio

Crest Audio Versarray 218 MKIII Manual

31 Juli 2024
Crest Audio

Crest Audio CPL 25C+ Manual

31 Juli 2024
Crest Audio

Crest Audio CPL 15+ Manual

29 Juli 2024
Crest Audio

Crest Audio CPL 4T Manual

28 Juli 2024
Crest Audio

Crest Audio CPL 26+ Manual

28 Juli 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Defender

Defender Aurora S8 Manual

17 September 2025
Edifier

Edifier G2000 PRO Manual

17 September 2025
Defender

Defender SPK 240 Manual

17 September 2025
LD Systems

LD Systems MAUI 28 G3 MIX Manual

17 September 2025
Defender

Defender V12 Manual

16 September 2025
Defender

Defender Stellar Manual

16 September 2025
Ibiza Sound

Ibiza Sound PORT10UHF-BT Manual

16 September 2025
Defender

Defender Boomer 12 Manual

16 September 2025
Defender

Defender BeatBox 100 Manual

16 September 2025
Defender

Defender V13 Manual

16 September 2025