CyberPower B100WRC1 Manual

CyberPower Ikke kategoriseret B100WRC1

Læs gratis den danske manual til CyberPower B100WRC1 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om CyberPower B100WRC1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

USER MANUAL

1-Outlet Surge Protector

B100WRC1

1-Outlet Surge Protector

B100WRC1

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower B100WRC1 Surge Protector.

This manual explains the features and operation of the B100WRC1.

Please take a few moments to read this manual.

FEATURES

1. Standard Outlet

2. Surge Protected Indicator

Illuminated when the surge protection feature is working properly.

SPECIFICATIONS

• B100WRC1Model Number:

• 1 Standard OutletOutlets:

• Surge Protection: 1500 Joules

• 125 V/15 A/1875 WElectrical Rating:

• UL Clamping Voltage: UL 1449 3rd/800 V (H-N, H-G, N-G)

• 45,000 AMaximum Peak Current:

• 3 AC Lines Protected: H-N: 15,000 A, H-G: 15,000 A, N-G: 15,000 A

• Less than 1 nanosecondResponse Time:

• Attenuation: Up to 32 dB

• 150 kHz to 100 MHzEMI/RFI Filtration:

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry

locations and only indoors. plug into another relocatable DO NOT

power tap. “daisy chain” surge protectors. use DO NOT DO NOT

with any aquarium equipment. DO NOT use if properly grounded

outlets are not available. DO NOT install this device if there is less

than 10 meters (30 feet) or more of wire between the electrical

outlet and electrical service panel. DO NOT use for medical or life

support equipment.

This device features an internal protection that will disconnect

the surge protective component at the end of its useful life, but it

will maintain unprotected power to the load.

TROUBLESHOOTING

If the protected indicator does not light, the surge protector’s AC

lines are no longer protected from surge. The surge protector

may have received a power surge or spike beyond its speciﬁed

limits that overloaded the protection circuitry and rendered it

inactive. The surge protector has protected your connected

equipment as designed, but it will not protect against future

surges and spikes. It should be replaced.

TECHNICAL SUPPORT

Please contact our Tech Support Department with installation,

troubleshooting, or general product questions.

• Phone: 1-877-297-6937

• Email: tech@cpsww.com

• Hours of Operation: Monday – Friday 7:00am – 6:00pm CST

LIMITED LIFETIME WARRANTY AND CONNECTED

EQUIPMENT GUARANTEE

Read the following terms and conditions carefully before using the

CyberPower B100WRC1 (the “product”). By using the product, you

consent to be bound by the terms and conditions of this limited

lifetime warranty and connected equipment guarantee (together

referred to as this “warranty”). IF YOU DO NOT AGREE TO THE

TERMS AND CONDITIONS OF THIS WARRANTY, YOU SHOULD

RETURN THE PRODUCT FOR A FULL REFUND PRIOR TO USING IT.

Who is providing this Warranty, and what does it cover?

Cyber Power Systems (USA), Inc. (“CyberPower”) provides this

Limited Lifetime Warranty. It only covers the original purchaser

and ends if you no longer own the product. This warranty covers

defects in materials and workmanship in the product under normal

use and conditions. It also covers equipment connected to the

product and damaged because of the failure of the product. This

warranty covers the product and connected equipment for as

long as you own the product.

How do you open a connected equipment claim?

1. Call us at (877) 297-6937, or write to us at Cyber Power Systems

(USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN 55379, or

send us an email at claims@cpsww.com within 10 days of the

occurrence for instructions.

2. When you contact CyberPower, identify the product, the

purchase date, and the item(s) of connected equipment. Have

information on all applicable insurance or other resources of

recovery/payment that are available to the initial customer, and

request a claim number.

3. You must provide a dated purchase receipt (or other proof of

the original purchase) for the CyberPower unit and connected

equipment. You also need to provide a description of the

damage to your connected equipment.

4. Pack and ship the product to CyberPower and the item(s) of

connected equipment, a repair cost estimate for the damage

to the connected equipment, and all claim forms that

CyberPower provides to you. Show the claim number on the

shipping label, or include it with the product. You must prepay

all shipping costs. You are responsible for packaging and

shipment, and you must pay the cost of the repair estimate.

What will CyberPower do to correct problems?

CyberPower will inspect and examine the product. If the product

is defective in material or workmanship, CyberPower will replace

it at CyberPower’s expense, or CyberPower will refund the full

purchase price you paid for the product (purchase receipt

showing price paid is required). If the product failed to protect

any equipment plugged into it, we will also send you forms for

making your claim for the connected equipment. We will repair

or replace the equipment that was damaged because of the

failure of the product or pay you the fair market value (NOT

REPLACEMENT COST), of the equipment at of the time of the

damage. We will use Orion Blue Book, another third-party

valuation guide, eBay, Craigslist, or other source to establish

that amount. Our maximum liability is limited to $25,000 for the

B100WRC1.

Who pays for shipping?

We pay shipping when we send items to you; you pay when you

send items to us.

What are some things this Warranty does not cover?

1. THIS WARRANTY DOES NOT COVER: ANY SOFTWARE THAT

WAS DAMAGED, SOFTWARE THAT NEEDS TO BE REPLACED

DUE TO THE FAILURE OF THE PRODUCT, OR ANY DATA

THAT IS LOST AS A RESULT OF THE FAILURE. THIS

WARRANTY DOES NOT COVER THE RESTORATION OF DATA

OR RECORDS, OR THE REINSTALLATION OF SOFTWARE.

2. This warranty does not cover: misuse, modiﬁcation, operation,

or storage outside of the environmental limits of the product or

the equipment connected to it. It does not cover damage while

in transit or in storage; if there has been improper operation or

maintenance, or use with items not designed or intended for

use with the product, such as laser printers, appliances,

aquariums, medical, or life support devices, etc.

What are the other limitations?

The sole and exclusive remedies of the initial customer are those

provided by this warranty.

1. This warranty does not apply unless the product and the

connected equipment were connected to properly wired and

grounded outlets (including compliance with electrical and

safety codes of the most current electrical code), without the

use of any adapters or other connectors.

2. The product must have been plugged directly into the power

source. The equipment connected to the product must be

directly connected in the product, not “daisy chained”

together in serial fashion with any extension cords, another

product, or device similar to the product, surge suppressor, or

power tap. Any such installation voids the warranty.

3. The product and connected equipment must have been used

properly in a suitable environment, in conformance with any

applicable license, instruction manual, or warnings.

4. The product must have been used at all times within the

limitations on the product’s VA capacity.

Where can I get more information?

Cyber Power Systems (USA), Inc.

4241 12th Avenue East Suite 400

Shakopee, MN 55379;

Call us at (877) 297-6937;

Send us an email at claims@cpsww.com

PRODUCT REGISTRATION

Prompt product registration assures coverage under the limited

lifetime warranty, and also allows the opportunity of notiﬁcations

for product enhancements, upgrades, and other announcements.

Registration is quick and easy. Go to the Product Registration

Page at www.CyberPowerSystems.com/registration.

CONTACT INFORMATION

Cyber Power Systems (USA), Inc.

4241 12th Avenue East Suite 400

Shakopee, MN 55379

Toll-free: 1-877-297-6937 | CyberPowerSystems.com

K01-0000698-00

CyberPowerSystems.com

All other trademarks are the property of their respective owners.

This device is manufactured using environmentally-safe

procedures in compliance with the Restriction of Hazardous

Substances (RoHS) directive.

Please join CyberPower in caring for the

environment by recycling this manual.

UL Listed to U.S. and Canadian Safety Standards UL 1449.

This product is listed to applicable U.S. and Canadian safety

standards by Underwriters Laboratories Inc.

Full compliance with RoHS.

WARNING: This product can expose you to chemicals including

styrene (ABS), which is known to the State of California to cause cancer.

For more information, go to www.p65warnings.ca.gov.

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	Ikke kategoriseret
Model:	B100WRC1

Har du brug for hjælp?

Hvis du har brug for hjælp til CyberPower B100WRC1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret CyberPower Manualer

CyberPower P6WUC15 Manual

30 Maj 2025

CyberPower PDU13104 Manual

28 Januar 2025

CyberPower CRA30009 Manual

7 Januar 2025

CyberPower CRA50006 Manual

7 Januar 2025

CyberPower CRA30010 Manual

7 Januar 2025

CyberPower SNEV001 Manual

24 December 2024

CyberPower P406U Manual

3 December 2024

CyberPower BP192VL2U01 Manual

2 December 2024

CyberPower CPS3500PIE Manual

8 November 2024

CyberPower CPS5000PIE Manual

8 November 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ORNO OR-ZL-1678 Manual

15 Juni 2025

LiftMaster 041-0405-000 Manual

15 Juni 2025

CDN TMW1 Manual

15 Juni 2025

Bradley S19-500 Manual

15 Juni 2025

Vestil FE-4-72 Manual

15 Juni 2025

Powr-Flite PFX1080 Manual

15 Juni 2025

Hughes & Kettner BassKick 707 Manual

15 Juni 2025

Marshall VSC-100 Manual

15 Juni 2025

Xiaomi Smart Electric Toothbrush T501 Manual

15 Juni 2025

Scarlett SC-SM10S53 Manual

15 Juni 2025