CyberPower B602RC5 Manual

CyberPower Ikke kategoriseret B602RC5

Læs gratis den danske manual til CyberPower B602RC5 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om CyberPower B602RC5, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK:

Use only in dry locations and only indoors.

DO NOT plug into another relocatable power tap.

DO NOT “daisy chain” surge protectors.

DO NOT use with any aquarium equipment.

DO NOT use if properly grounded outlets are not available.

DO NOT install this device if there is less than 10 meters (30 feet) of wire between

the electrical outlet and electrical service panel.

DO NOT use for medical or life support equipment. This device features an internal

protection that will disconnect the surge protective component at the end of its

useful life, but it will maintain unprotected power to the load.

FOR MORE INFORMATION

Visit CyberPowerSystems.com for more information regarding:

• Product information and certiﬁcations

• Product warranty

• Connected equipment guarantee

TECHNICAL SUPPORT

Visit: CyberPowerSystems.com/support

Toll-Free: 1-877-297-6937

Hours of Operation: Monday - Friday: 7:00am - 6:00pm CST

All other trademarks are the property of their respective owners.

FEATURES

1. ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a 15 A

breaker. When an overload occurs, it will automatically

switch off. To resume operation, ensure the overload

condition is removed and reset the surge protector by

switching the unit ON.

2. Protected LED Indicator

Illuminated when the surge protection feature is

working properly.

3. Standard Grounded Outlets (6)

4. Power Cord

TROUBLESHOOTING

If the ON/OFF is switched OFF, the 15 Amp circuit breaker may have tripped.

Examine your connected equipment and remove the device that is overloading

the circuit. Then, turn the ON/OFF switch back to RESET.

If the protected indicator does not light, the surge protector’s AC lines are no

longer protected from surge. The surge protector may have received a power

surge or spike beyond its speciﬁed limits that overloaded the protection circuitry

and rendered it inactive. The surge protector has protected your connected

equipment as designed, but it will not protect against future surges and spikes.

It should be replaced.

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400 | Shakopee, MN 55379

CyberPowerSystems.com

SPECIFICATIONS

Model Number:

Outlets:

Power Cord Length:

Surge Protection:

Electrical Rating:

Circuit Breaker:

B602RC5

Standard Grounded Outlets (6)

2.5 ft

500 Joules

125 V/15 A/60 Hz/1875 W

Resettable 15 Amp

i WARNING: This product can expose you to chemicals including Styrene, which are

known to the State of California to cause cancer, and Bisphenol A (BPA), which are

known to the State of California to cause birth defects or other reproductive harm.

For more information, go to www.P65Warnings.ca.gov.

CONFORMANCE APPROVALS

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may

cause undesired operation.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined

by turning the equipment on and o, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modiﬁcations not expressly approved by the

party responsible for compliance could void the user’s authority to

operate the equipment.

K01-0000923-00

YOUR ULTIMATE ALLY IN POWER

6 OUTLET SURGE

PROTECTOR

B602RC5

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	Ikke kategoriseret
Model:	B602RC5

Har du brug for hjælp?

Hvis du har brug for hjælp til CyberPower B602RC5 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret CyberPower Manualer

CyberPower PS205U Manual

29 Oktober 2025

CyberPower CS20A-EBP Manual

5 Oktober 2025

CyberPower PDU31009 Manual

20 August 2025

CyberPower CR6U61002 Manual

20 August 2025

CyberPower SM30KPMX Manual

20 August 2025

CyberPower PDU31414 Manual

20 August 2025

CyberPower PDU41404 Manual

19 August 2025

CyberPower SM10KADFA Manual

29 Juli 2025

CyberPower SM10KASPA Manual

29 Juli 2025

CyberPower P2WU Manual

24 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Philips Evnia 32M3C3540 Manual

30 Oktober 2025

Soler & Palau DUOVENT MODULAR XL DV Manual

30 Oktober 2025

Iogear GCS1228TAA3 Manual

30 Oktober 2025

Abus E212 Manual

30 Oktober 2025

Olimpia Splendid Bi2 SLIR Manual

30 Oktober 2025

EtherWAN EX24402 Manual

30 Oktober 2025

Abus Smartvest Pro APP45200 Manual

30 Oktober 2025

EtherWAN ED3501 Manual

30 Oktober 2025

Sage the Puck Sucker SCA800 Manual

30 Oktober 2025

Wimberley AP-606 Manual

30 Oktober 2025