CyberPower CPUAC600 Manual

CyberPower Ikke kategoriseret CPUAC600

Læs gratis den danske manual til CyberPower CPUAC600 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 21 anmeldelser. Har du et spørgsmål om CyberPower CPUAC600, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower CPUAC600 Surge

Protector. This manual explains the features and operation of the

CPUAC600. Please take a few moments to read this manual.

WARNING

IDENTIFYING THE CORRECT VOLTAGE AND POLARITY

SETTINGS FOR THE CONNECT EQUIPMENT AND ADJUSTING

THE PRODUCT ACCORDINGLY IS THE USER’S RESPONSIBILITY.

Caution: This device is intended to input 120V AC power, all

necessary safety precautions should be followed. Not

recommended for use by children.

Failure to adjust the adaptor settings to match the requirements

of the connected device can result in damage to the device.

1. Identify the correct plug tip that ﬁts in the device you wish

to power.

2. Identify the polarity required for the device you are connecting.

The polarity will typically be identiﬁed in either the user’s

manual or on the input speciﬁcations on the device itself (see

‘Polarity Markings’ section). Turn the tip you are inserting into

the adaptor cord so that the ‘ ’ text on the tip lines up with 

either the ‘+’ or ‘–’ symbol on the adaptor cord depending on

whether positive ‘+’ or negative ‘–’ polarity is required. If the

device is not polarized, either setting can be used. If the device

does not have a polarity speciﬁcation, contact the manufacturer

of the device and ask them. Using an incorrect polarity can

damage the device.

3. Set the voltage switch to the required voltage for the device you

are connecting. The voltage required will typically be identiﬁed

in either the user’s manual or on the input speciﬁcations on the

device itself. If you cannot determine the proper voltage,

contact the manufacturer of the device and ask them. Using an

incorrect voltage can damage the device.

4. Plug the adaptor cord into the device then plug the AC power

cord for the adaptor into a standard 120V outlet. If the device

does not function, unplug the AC power cord from the outlet

immediately. Check to make sure the voltage and polarity

settings being used are correct.

DETACHABLE PLUGS

• 2.5 (OD) x 0.75 (ID) x 10.5 ±0.5 (L) - Yellow

• 3.0 (OD) x 1.00 (ID) x 10.5 ±0.5 (L) - Black

• 3.5 (OD) x 1.35 (ID) x 10.5 ±0.5 (L) - Red

• 4.0 (OD) x 1.70 (ID) x 11.0 ±0.5 (L) - Yellow

• 5.5 (OD) x 1.50 (ID) x 12.2 ±0.5 (L) - Black

• 5.5 (OD) x 2.10 (ID) x 12.0 ±0.5 (L) - Blue

• 5.5 (OD) x 2.50 (ID) x 12.0 ±0.5 (L) - White

POLARITY MARKINGS

When looking for polarity markings on the device you wish to

power with the CyberPower Universal AC adapter, they will

typically be identiﬁed as such:

USER MANUAL

Universal AC Adapter

CPUAC600

Universal AC Adapter

CPUAC600

4.567.5912 3

Voltage Selector

Up to 600mA

Positive Polarity Negative Polarity

Depending on the device, the orientation of the positive and

negative poles in the depiction may be reversed but, if the

device requires positive polarity, the ‘–’ symbol will be on the

side with the ‘C’ shaped arc. If negative polarity is required, the

‘+’ symbol will be on the side with the ‘C’ shaped arc.

TECHNICAL SUPPORT

Please contact our Tech Support Department with installation,

troubleshooting, or general product questions.

• Phone: 1-877-297-6937

• Email: tech@cpsww.com

• Hours of Operation:

Monday – Friday 7:00am – 6:00pm CST

3 4

K01-0000254-04

1-YEAR LIMITED WARRANTY

Read the following terms and conditions carefully before using

the CyberPower CPUAC600 (the “product”). By using the

product, you consent to be bound by the terms and conditions

of this 1-year limited warranty. IF YOU DO NOT AGREE TO THE

TERMS AND CONDITIONS OF THIS WARRANTY, YOU SHOULD

RETURN THE PRODUCT FOR A FULL REFUND PRIOR TO

USING IT.

Who is providing this warranty, and what does it cover?

Cyber Power Systems (USA), Inc. (“CyberPower”) provides this

1-year limited warranty. It only covers the original purchaser and

ends if you no longer own the product. This warranty covers

defects in materials and workmanship in the product under normal

use and conditions. This warranty covers the product for as long

as you own the product, up to 1 year from date of purchase.

What must I do to make a warranty claim?

1. Call us at (877) 297-6937, or write to us at:

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400

Shakopee, MN 55379,

or send us an email at claims@cpsww.com within 10 days of

the occurrence for instructions.

2. Identify the product and the purchase date.

3. Provide a dated purchase receipt (or other proof of the

original purchase) and provide a description of the defect.

4. Pack and ship the product to CyberPower and all claim forms

that are provided to you. Show the claim number on the

shipping label, or include it with the product. You must prepay

all shipping costs. You are responsible for packaging and

shipment, and you must pay the cost of the repair estimate.

5. Do each of these within ten days of the occurrence.

What will CyberPower do to correct problems?

CyberPower will inspect and examine the product. If the product

is defective in material or workmanship, CyberPower will replace

it at CyberPower’s expense, or CyberPower will refund the full

purchase price you paid for the product (purchase receipt

showing price paid is required).

Who pays for shipping?

We pay shipping when we send items to you; you pay when you

send items to us.

CONTACT INFORMATION

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400

Shakopee, MN 55379

Toll-free: 1-877-297-6937 | CyberPowerSystems.com

What are some things this Warranty does not cover?

1. THIS WARRANTY DOES NOT COVER: ANY SOFTWARE THAT

WAS DAMAGED, SOFTWARE THAT NEEDS TO BE REPLACED

DUE TO THE FAILURE OF THE PRODUCT, OR ANY DATA THAT IS

LOST AS A RESULT OF THE FAILURE. THIS WARRANTY DOES

NOT COVER THE RESTORATION OF DATA OR RECORDS, OR THE

REINSTALLATION OF SOFTWARE.

2. This warranty does not cover: misuse, modiﬁcation, operation or

storage outside of the environmental limits of the product or

the equipment connected to it. It does not cover damage while

in transit or in storage; if there has been improper operation or

maintenance, or use with items not designed or intended for

use with the product, such as laser printers, appliances,

aquariums, medical, or life support devices, etc.

What are the other limitations?

The sole and exclusive remedies of the initial customer are those

provided by this warranty.

1. This warranty does not apply unless the product was connected

to properly wired and grounded outlets (including compliance

with electrical and safety codes of the most current electrical

code), without the use of any adapters or other connectors.

2. The product must have been plugged directly into the power

source, not “daisy chained” together in serial fashion with any

extension cords, another product, or device similar to the

product, surge suppressor, or power tap. Any such installation

voids the warranty.

3. The product and connected equipment must have been used

properly in a suitable environment, in conformance with any

applicable license, instruction manual, or warnings.

4. The product must have been used at all times within the

limitations on the product’s maximum rated wattage.

Where can I get more information?

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400

Shakopee, MN 55379;

Call us at (877) 297-6937;

Send us an email message at claims@cpsww.com.

PRODUCT REGISTRATION

Prompt product registration assures coverage under the limited

warranty, and also allows the opportunity of notiﬁcations for

product enhancements, upgrades, and other announcements.

Registration is quick and easy. Go to the Product Registration

Page at CyberPowerSystems.com/registration.

This device is manufactured using environmentally-safe procedures in

compliance with the Restriction of Hazardous Substances (RoHS) directive.

Please join CyberPower in caring for the environment by recycling.

CyberPowerSystems.com

All other trademarks are the property of their respective owners.

WARNING: This product can expose you to chemicals including bisphenol A (BPA)

and styrene (ABS), which is known to the State of California to cause reproductive

harm and cancer. For more information, go to www.P65Warnings.ca.gov.

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	Ikke kategoriseret
Model:	CPUAC600
Bredde:	58.42 mm
Dybde:	33.02 mm
Højde:	93.98 mm
Vægt:	108.86 g
Produktfarve:	Sort
Pakkevægt:	190.5 g
Pakkedybde:	55.88 mm
Pakkebredde:	152.4 mm
Pakkehøjde:	190.5 mm
Opbevaringstemperatur (T-T):	-15 - 45 °C
Relativ luftfugtighed ved drift (H-H):	0 - 95 %
Driftstemperatur (T-T):	0 - 35 °C
Husmateriale:	Syntetisk ABS
Strømforsyningstype:	Indendørs
Udgangseffekt:	- W
Certificering:	RoHS
LED-indikatorer:	Ja
Udgangsspænding:	3 V
Udgangsstrøm:	0.6 A
Kabellængde:	1.5 m
Indgangsspænding:	100-120 V
Formål:	Universel
Indgangsfrekvens:	- Hz
Stærkstrøm typen:	AC-to-DC
Supplerende strømkontakter:	7
Aftagelige strømforbindelser:	Ja