CyberPower CRA40001 Manual

CyberPower Ikke kategoriseret CRA40001

Læs gratis den danske manual til CyberPower CRA40001 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om CyberPower CRA40001, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Part Identification

Installation

1. Remove the existing door lock and handle assembly as shown

below.

NOTE: Keep the handle cam on hand to use in the following step

to install the combination lock.

No.

2. Unscrew the cam washer and screw plate from the combination

lock.

Part

Combination Lock Dial

Wing Knob

Locked/Unlocked Position Arrow

Cam Washer

Screw Plate

Keys

Reversing the Handle Direction

The direction in which the handle lifts to open can be reversed by

rotating the cam washer 90 degrees counterclockwise as shown

below. This is especially useful if the door orientation has been

reversed.

90°

3. Slide the combination lock through the door opening, install the

handle cam, and fasten the parts as shown below.

Front Back

USER’S MANUAL

Combination Door Lock

for Rack Enclosures

Combination Door Lock

for Rack Enclosures

CRA40001

SAVE THESE INSTRUCTIONS

Please read this manual and follow the instructions for installation and use.

K01-0000551-00

CyberPower Systems, Inc.

www.cyberpower.com

For USA and Canada:

4241 12th Ave East, Suite 400

Shakopee, MN 55379

Toll-free: (877) 297-6937

For all other regions:

Please visit our website for local contact information.

Setting and Changing the Lock Combination

NOTE: To change the combination, the lock must be engaged and the

existing combination must be known. The factory default

combination is 0-0-0.

a. Dial the known combination.

b. Turn the wing knob 180 degrees counterclockwise so that the

position arrow points UP (unlocked position).

c. Turn it an additional 15 degrees counterclockwise.

d. Dial the new desired combination.

e. Turn the wing knob 15 degrees clockwise to the unlocked

position. The new combination is now set.

To lock, turn the wing knob 180 degrees clockwise so that the

position arrow points DOWN (locked position); then scramble the

combination dial.

15°

180°

Locking and Unlocking the Door

Using the Combination Dial

1. Dial the combination.

2. Turn the wing knob 180 degrees counterclockwise (unlocked

position) so that the position arrow points UP. Lift the handle

and turn to open the door. To lock, return the handle to the

closed position and turn the wing knob 180 degrees clockwise

so that the position arrow points DOWN (locked position).

3. Scramble the combination dial.

Using the Key

The lock can be opened or closed using the included keys. Using

the key overrides the combination lock feature.

Locked Unlocked

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	Ikke kategoriseret
Model:	CRA40001

Har du brug for hjælp?

Hvis du har brug for hjælp til CyberPower CRA40001 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret CyberPower Manualer

CyberPower P6WUC15 Manual

30 Maj 2025

CyberPower PDU13104 Manual

28 Januar 2025

CyberPower CRA30009 Manual

7 Januar 2025

CyberPower CRA50006 Manual

7 Januar 2025

CyberPower CRA30010 Manual

7 Januar 2025

CyberPower SNEV001 Manual

24 December 2024

CyberPower P406U Manual

3 December 2024

CyberPower BP192VL2U01 Manual

2 December 2024

CyberPower CPS3500PIE Manual

8 November 2024

CyberPower CPS5000PIE Manual

8 November 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rival CN753-W Manual

15 Juni 2025

Acopa 553WSMKE Manual

15 Juni 2025

Atosa RDCS-35 Manual

15 Juni 2025

Gourmia GAF692 Manual

15 Juni 2025

Taylor 5315856 Manual

15 Juni 2025

Watts LF8B Manual

15 Juni 2025

Watts PLT-5 Manual

15 Juni 2025

ToiToiKids Fay Manual

15 Juni 2025

Astell&Kern PD10 Manual

15 Juni 2025

Aiphone JP-8Z Manual

15 Juni 2025