CyberPower CRA60003 Manual

CyberPower Ikke kategoriseret CRA60003

Læs gratis den danske manual til CyberPower CRA60003 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 125 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 63 anmeldelser. Har du et spørgsmål om CyberPower CRA60003, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

QUICK START GUIDE

Heavy-Duty Caster Kit

For Rack Enclosures

Heavy-Duty Caster Kit

For Rack Enclosures

K01-0000554-00

CRA60003

Parts List

Installation

Part

Heavy-Duty Caster

3” Leveling Feet

M6 Flange Nut

3” Stabilization Brackets

M8x25 Hex Bolt

M8x60 Hex Screw Bolt

M8 Flat Washer

M8 Spring Washer

M8 Hex Screw Nut

Qty

Install the casters before installing equipment into the rack enclosure. For

safety reasons, it is highly recommended to complete the caster installation

between two or more people.

WARNING

Install Heavy-Duty Casters and Leveling feet

Remove the original casters and leveling feet, if installed, from the rack. Using the

included hardware, as shown below, install the heavy-duty casters. M6 flange nuts

screw to riveted screws on the base of the rack. Then install the 3" leveling feet as

shown below.

Heavy-Duty Caster

M6 Flange Nut

3” Leveling Feet

For warranty and additional information, please visit: www.cyberpower.com.

Install Stabilization Brackets

To reduce the risk of injury and damage to the equipment, install the 3” stabilization

brackets to the front and rear frame. The brackets can be installed inside or outside of

the enclosure for multiple applications as shown below.

3” Stabilization Brackets

M8x25 Hex Bolt

Install on Pallet for Shipping

To ship a rack with heavy-duty casters installed, it is necessary to use the stabilization

brackets for safety. Load the rack on to a suitable pallet and install the stabilization

brackets on the outside of the front and rear frame as shown below.

NOTE: Always raise the leveling feet when moving the rack and lower them after positioning the rack

in it's final location on the shipping pallet.

CAUTION Do not ship the enclosure with any equipment installed.

M8x60 Hex Screw Bolt

3” Stabilization Brackets

M8 Flat Washer

M8 Spring Washer

M8 Hex Screw Nut

M8 Flat Washer

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	Ikke kategoriseret
Model:	CRA60003
Type:	Castorhjul
Bredde:	67 mm
Dybde:	95 mm
Højde:	101 mm
Vægt:	5700 g
Produktfarve:	Sort
Pakkevægt:	6000 g
Pakkedybde:	400 mm
Pakkebredde:	170 mm
Pakkehøjde:	160 mm
Bæredygtighedscertifikater:	RoHS
Maksimal vægtkapacitet:	340 kg