CyberPower CSP806U Manual

CyberPower Ikke kategoriseret CSP806U

Læs gratis den danske manual til CyberPower CSP806U (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om CyberPower CSP806U, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower CSP806U Surge

Protector. The information contained in this brochure explains

the features and operation of the CSP806U. Please take a few

moments to read this manual.

FEATURES

1. Protected LED Indicator

Illuminated when the surge protection feature is working properly.

2. Grounded LED Indicator

Illuminated when a properly grounded AC outlet is detected.

3. ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a 15A

breaker. When an overload occurs, it will automatically

switch o. To resume operation, ensure the overload

condition is removed and reset the surge protector by

switching the unit ON.

4. USB Charging Ports*

Connect and charge up to two (2) USB devices using the

surge protected USB charging ports.

*USB outlets cannot be used as a USB hub. This device does

not transfer data.

5. Wide-Spaced Outlet

Easily plug in large chargers without interfering with the

other outlets.

SPECIFICATIONS

• Model Number: CSP806U

• Outlets: 6 Standard Outlets, 2 Transformer Spaced outlets, 2

USB charge ports (2.4 Amps, shared)

• Surge Protection: 3,000 Joules

• Electrical Rating: 125V/15A/1875W

• UL Clamping Voltage: UL 1449 3rd/600V(H-N, H-G, N-G)

• Maximum Peak Current: 105,000A

• 3 AC Lines Protected: H-N: 45,000A; H-G: 30,000A;

N-G: 30,000A

• Response Time: Less than 1 nanosecond

• USB charger rating: 5V/2.4A total

• Circuit Breaker: Resettable 15 Amp

• Plug Style: Right angle type

• Power Cord Length: 6 ft cord

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in

dry locations and only indoors. DO NOT plug into another

relocatable power tap. DO NOT “daisy chain” surge

protectors. DO NOT DO use with any aquarium equipment.

NOT use if properly grounded outlets are not available. DO

NOT install this device if there is not at least 10 meters (30

feet) or more of wire between the electrical outlet and

electrical service panel. This device features an internal

protection that will disconnect the surge protective

component at the end of its useful life, but will maintain

power to the load – now unprotected.

TROUBLESHOOTING

If the ON/OFF is switched o, the 15 AMP circuit breaker may

have tripped. Examine your connected equipment and

remove the device that is overloading the circuit. Then, the

ON/OFF switch back to .RESET

If the indicator does not light when you plug in the Grounded

surge protector, move the surge protector to a dierent

grounded three-prong AC outlet. If it still does not light,

return the product to dealer for assistance. If the surge

protector proves to be working properly, your outlets may

not be a properly grounded and need to be repaired by a

professional electrician. If the indicator turns o Grounded

after a period of use, the surge protection has been depleted.

Replace your surge protector.

If the Protected indicator does not light, the surge protector’s

AC lines is no longer protected from surge. Replace the surge

protector. The surge protector may have received a power

surge or spike beyond its speciﬁed limits that overloaded the

protection circuitry and rendered it inactive. The surge

protector has protected your connected equipment, but it

will not protect against future surges and spikes.

TECHNICAL SUPPORT

Please contact our Tech Support department with

installation, troubleshooting, or general product questions.

• Phone: 1-877-297-6937

• Email: tech@cpsww.com

• Hours of Operation: Monday – Friday

7:00am – 6:00pm CST

USER’S MANUAL

8-Outlet Surge Protector

CSP806U

8-Outlet Surge Protector

CSP806U

1 2

2.4A USB

PROTECTED GROUNDED

LIMITED WARRANTY AND CONNECTED

EQUIPMENT GUARANTEE

Read the following terms and conditions carefully before

using the CyberPower CSP806U (the “CPS Product”). By

using the CPS Product, you consent to be bound by the

terms and conditions of this Limited Warranty and

Connected Equipment Guarantee (together referred to as

this “Warranty”). IF YOU DO NOT AGREE TO THE TERMS

AND CONDITIONS OF THIS WARRANTY, YOU SHOULD

RETURN THE PRODUCT FOR A FULL REFUND PRIOR TO

USING IT.

Who is providing this Warranty, what does it cover?

Cyber Power Systems (USA), Inc. (“CyberPower”) provides

this Limited Warranty. It only covers the original purchaser

and ends if you no longer own the CPS Product. This

warranty covers defects in materials and workmanship in the

CPS Product under normal use and conditions. It also covers

equipment connected to the CPS Product and damaged

because of the failure of the CPS Product. This warranty

covers the CPS Product and connected equipment for as

long as you own the CPS Product.

How Do You Open A Connected Equipment Claim?

1. Call us at (877) 297-6937 or write to us at Cyber Power

Systems (USA), Inc., 4241 12th Ave. E., STE 400,

Shakopee, MN 55379, or send us an e-mail message at

claims@cpsww.com for instructions, within 10 days of

the occurrence.

2. When you contact CyberPower, identify the Product, the

Purchase Date, and the item(s) of Connected Equipment.

Have information on all applicable insurance or other

resources of recovery/payment that are available to the

Initial Customer and Request a Claim Number.

3. You must provide a dated purchase receipt (or other proof

of the original purchase) for the CyberPower unit and

connected equipment. You also need to provide a

description of the damage to your connected equipment.

4. Pack and ship the product to CyberPower and, if

requested, the item(s) of Connected Equipment, a repair

cost estimate for the damage to the Connected

Equipment, and all claim forms that CyberPower provides

to you. Show the Claim Number on the shipping label or

include it with the product. You must prepay all shipping

costs, you are responsible for packaging and shipment,

and you must pay the cost of the repair estimate.

What will CyberPower do to correct problems?

CyberPower will inspect and examine the CPS Product. If the

CPS Product is defective in material or workmanship,

CyberPower will repair or replace it at CyberPower’s

expense, or CyberPower will refund the full purchase price

you paid for the CPS Product (purchase receipt showing

price paid is required). If the CPS Product failed to protect

any equipment plugged into it, we will also send you forms

for making your claim for the connected equipment. We will

repair or replace the equipment that was damaged because

of the failure of the CPS Product or pay you the fair market

value (NOT REPLACEMENT COST) of the equipment at of

the time of the damage. We will use Orion Blue Book,

another a third-party valuation guide, eBay, craigslist, or

other source to establish that amount. Our maximum liability

is limited to $300,000 for the CSP806U.

Who pays for shipping?

We pay when we send items to you; you pay when you send

items to us.

What are some things this Warranty does not cover?

1. THIS WARRANTY DOES NOT COVER ANY SOFTWARE

THAT WAS DAMAGED OR NEEDS TO BE REPLACED DUE

TO THE FAILURE OF THE CPS PRODUCT OR ANY DATA

THAT IS LOST AS A RESULT OF THE FAILURE OR THE

RESTORATION OF DATA OR RECORDS, OR THE

REINSTALLATION OF SOFTWARE.

2. This Warranty does not cover: misuse, modiﬁcation,

operation or storage outside environmental limits of the

CPS Product or the equipment connected to it, or for

damage while in transit or in storage, nor if there has been

improper operation or maintenance, or use with items not

designed or intended for use with the CPS Product, such

as laser printers, appliances, aquariums, medical or life

support devices, etc.

What are the other limitations?

The sole and exclusive remedies of the Initial Customer are

those provided by this Warranty.

1. This Warranty does not apply unless the CPS Product and

the connected equipment were connected to properly

wired and grounded outlets (including compliance with

electrical and safety codes of the most current electrical

code), without the use of any adapters or other connectors.

2. The CPS Product must have been plugged directly into the

power source and the equipment connected to the CPS

Product must be directly connected in the CPS Product,

not “daisy-chained” together in serial fashion with any

extension cords, another Product or device similar to the

CPS Product, surge suppressor, or power tap. Any such

installation voids the Warranty.

3. The CPS Product and connected equipment must have

been used properly in a suitable and proper environment,

in conformance with any applicable license, instruction

manual, or warnings.

4. The CPS Product must have been used at all times within

the limitations on the CPS Product’s VA capacity.

This device is manufactured using environmentally-safe

procedures in compliance with the Restriction of

Hazardous Substances (RoHS) directive.

Please join CyberPower in caring for the

environment by recycling this manual.

3 4

Where can I get more information?

Contact CyberPower at 4241 12th Ave E., STE 400, Shakopee,

MN 55379; call us at (877) 297-6937; or send us an e-mail

message at claims@cpsww.com.

PRODUCT REGISTRATION

Prompt product registration assures coverage under the

Limited Warranty, and also allows the opportunity to be notiﬁed

of product enhancements, upgrades, and other announcements.

Registration is quick and easy. Go to Product Registration

page at www.cyberpower.com.

CONTACT INFORMATION

Cyber Power Systems, Inc. 4241 12th Avenue East Suite 400

Shakopee, MN 55379

Toll-free: 1-877-297-6937 | CyberPower.com

CONFORMANCE APPROVALS

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:

(1) This device may not cause harmful interference, And (2)

This device must accept any interference received, including

interference that may cause undesired operation.

Warning: Changes or modiﬁcations to this unit not expressly

approved by the party responsible for compliance could void

the user’s authority to operate the equipment. This Class B

digital apparatus complies with Canadian ICES-003.

NOTE: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

Cyber Power Systems, Inc.

www.cyberpower.com

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	Ikke kategoriseret
Model:	CSP806U

Har du brug for hjælp?

Hvis du har brug for hjælp til CyberPower CSP806U stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret CyberPower Manualer

CyberPower PDU31009 Manual

20 August 2025

CyberPower CR6U61002 Manual

20 August 2025

CyberPower SM30KPMX Manual

20 August 2025

CyberPower PDU31414 Manual

20 August 2025

CyberPower PDU41404 Manual

19 August 2025

CyberPower SM10KADFA Manual

29 Juli 2025

CyberPower SM10KASPA Manual

29 Juli 2025

CyberPower P2WU Manual

24 Juli 2025

CyberPower PDU81102 Manual

22 Juli 2025

CyberPower PDU31005 Manual

22 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

DataVideo PP-ONE X Manual

27 August 2025

Cougar LX500 Manual

27 August 2025

ENTES MM-122 Manual

27 August 2025

Tefal Principio TT1108 Manual

27 August 2025

Sauermann CP 210-R Manual

27 August 2025

ENTES MPR-47S-D Manual

27 August 2025

Panduit VS-AVT-C08-L10 Manual

27 August 2025

Deye SUN-10.5K-G02P1-AU-AM2 Manual

27 August 2025

Dorr CV-02 Manual

27 August 2025

Antelope Audio Eclipse 384 Manual

27 August 2025