CyberPower Doorsensor Manual

CyberPower Ikke kategoriseret Doorsensor

Læs gratis den danske manual til CyberPower Doorsensor (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om CyberPower Doorsensor, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Package Contents

Installation Guide

Step 1. Wire the DOORSENSOR to an ENVIROSENSOR

(sold separately) as shown below. One wire

connects to any of the Dry Contact Input terminals

(1-4) and the remaining wire connects to the COM

terminal.

Rack Enclosure Front Door

Rack Enclosure Rear Door

NOTE: The DOORSENSOR should be mounted on the opening

end of the enclosure door (opposite side of the hinges).

The magnet should be mounted ﬂush against the inside

edge of the door. Align the switch with the magnet

mounted on the enclosure door and adhere it to the

outside of the enclosure frame where the door closes.

(1) Door Switch Sensor with 10ft (3m) Cable

(6) Cable Ties

(3) Adhesive Cable Tie Holders

(6) (M2x10) Screws

(Two are spare)

Normal Door

NOTE: The DOORSENSOR should be mounted on the opening

end of the door (opposite side of the hinges).

321 4

COM

USER’S MANUAL

SAVE THESE INSTRUCTIONS

Please read this manual and follow the instructions for installation and use.

K01-0000444-01

Step 2. Clean the surface of the area where the sensor will

be installed.

Step 3. Remove the protective strip behind the sensor to

expose the adhesive tape backing. Place the sensor

on the desired location and press ﬁrmly for 30

seconds.

Magnetic Door Switch SensorMagnetic Door Switch Sensor

DOORSENSOR

RECON SERIESRECON SERIES

Switch

Magnet

Switch Magnet

Appendix

1. When the door is closed, the DOORSENSOR should be

aligned and the distance (gap) between the switch and

magnet should be less than 1/4" (6mm), as shown

below.

Less than 1/4 inch (6 mm)

O X

2. The ENVIROSENSOR Contact settings conﬁgured via

the connected RMCARD or PDU need to be changed to

"Normally Closed" in order for a closed door to be

monitored as such. See respective RMCARD or PDU

User Manual for more information.

For warranty and additional information, please visit:

www.cyberpower.com.

Contact

#1 Name & State

#2 Name & State

#3 Name & State

#4 Name & State

Apply Reset

DOORSENSOR

Contact#2

Contact#3

Contact#4

Normally Closed

Normally Open

(Optional) Use the included cable ties and adhesive

backed cable tie holder to secure the DOORSENSOR

cables.

(Optional) Drill 5/8" (1.6mm) holes where the

DOORSENSOR switch and magnet will be mounted on

the door frame and door.

Cyber Power Systems, Inc.

www.cyberpower.com

For USA and Canada:

4241 12th Ave East, Suite 400

Shakopee, MN 55379

Toll-free: (877) 297-6937

For all other regions:

Please visit our website for local contact information.

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	Ikke kategoriseret
Model:	Doorsensor

Har du brug for hjælp?

Hvis du har brug for hjælp til CyberPower Doorsensor stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret CyberPower Manualer

CyberPower P6WUC15 Manual

30 Maj 2025

CyberPower PDU13104 Manual

28 Januar 2025

CyberPower CRA30009 Manual

7 Januar 2025

CyberPower CRA50006 Manual

7 Januar 2025

CyberPower CRA30010 Manual

7 Januar 2025

CyberPower SNEV001 Manual

24 December 2024

CyberPower P406U Manual

3 December 2024

CyberPower BP192VL2U01 Manual

2 December 2024

CyberPower CPS3500PIE Manual

8 November 2024

CyberPower CPS5000PIE Manual

8 November 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ORNO OR-PSU-1675 Manual

15 Juni 2025

EmberGlo ES5CTS Manual

15 Juni 2025

Chapin 8201A Manual

15 Juni 2025

Gourmia GDK2365 Manual

15 Juni 2025

Xiaomi Wireless Mouse 3 Manual

15 Juni 2025

Auray SVRK-12U-D Manual

15 Juni 2025

Aiphone IXGW-TGW Manual

15 Juni 2025

Aiphone AC-2DE Manual

15 Juni 2025

Schlage S280 Manual

15 Juni 2025

Cleveland PGM3002 Manual

15 Juni 2025