CyberPower Professional CSP606T Manual

CyberPower Ikke kategoriseret Professional CSP606T

Læs gratis den danske manual til CyberPower Professional CSP606T (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 10 anmeldelser. Har du et spørgsmål om CyberPower Professional CSP606T, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

6-Outlet Surge Protector

CSP604T/CSP606T

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower CSP604T/CSP606T Surge

Protector. The information contained in this brochure explains the

features and operation of the CSP604T/CSP606T. Please take a

few moments to read this manual.

FEATURES

1. ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a 15A breaker.

When an overload occurs, it will automatically switch off. To

resume operation, ensure the overload condition is removed and

reset the surge protector by switching the unit ON.

2. Five Standard Outlets

3. One Wide-Spaced Outlet

Easily plug in large chargers without interfering with the

other outlets.

4. Surge Protected Data Line Connections

To protect your equipment from surge along phones/fax/

modems lines.

A. Connect the phone line from wall outlet into the “In” port.

B. Connect the phones/fax/modems line in the “Out” ports.

SPECIFICATIONS

• Model Number: CSP604T/CSP606T

• Outlets: 5 – 1 Transformer Spaced Outlet

• Surge Protection: 1350 Joules

• Electrical Rating: 125V/15A/1875W

• UL Clamping Voltage: UL 1449 3rd/400V (H-N, H-G, N-G)

• Maximum Peak Current: 60,000A

• 3 AC Lines Protected: H-N: 30,000A, H-G: 15,000A,

N-G: 15,000A;(The maximum surge possible on household

wiring is 6,000 volts)

• Response Time: Less than 1 nanosecond

• Attenuation: Up to 43dB

• Telecommunications Protection: RJ11 1 in / 1 out

• Circuit Breaker: Resettable 15 Amp

• EMI/RFI Filtration: 150 kHz to 100 MHz

CAUTION

TO REDUCE THE RICK OF ELECTRIC SHOCK - Use only in dry

locations and only indoors. plug into another relocatDO NOT -

able power tap. “daisy chain” surge protectors.DO NOT

DO NOT use with any aquarium equipment. DO NOT use if

properly grounded outlets are not available. install this DO NOT

device if there is not at least 10 meters (30 feet) or more of wire

between the electrical outlet and electrical service panel. This

device features an internal protection that will disconnect the

surge protective component at the end of its useful life, but will

maintain power to the load – now unprotected.

TROUBLESHOOTING

If the is switched off, the 15 AMP circuit breaker may ON/OFF

have tripped. Examine your connected equipment and remove

the device that is overloading the circuit. Then, turn the ON/OFF

switch back to RESET.

TECHNICAL SUPPORT

Please contact our Tech Support department with installation,

troubleshooting, or general product questions.

• Phone: 1-877-297-6937

• Email: tech@cpsww.com

• Hours of Operation: Monday – Friday, 8:00am – 5:00pm CST

respective owners.

K09-0000101-01

User Manual

LIMITED WARRANTY AND CONNECTED

EQUIPMENT GUARANTEE

Read the following terms and conditions carefully before using

the CyberPower CSP604T/CSP606T (the “CPS Product”). By

using the CPS Product, you consent to be bound by the terms

and conditions of this Limited Warranty and Connected

Equipment Guarantee (together referred to as this “Warranty”).

IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF

THIS WARRANTY, YOU SHOULD RETURN THE PRODUCT FOR

A FULL REFUND PRIOR TO USING IT.

Who is providing this Warranty, what does it cover?

CyberPower Systems (USA), Inc. (“CyberPower”) provides this

Limited Warranty. It only covers the original purchaser and ends

if you no longer own the CPS Product. This warranty covers

defects in materials and workmanship in the CPS Product under

normal use and conditions. It also covers equipment connected

to the CPS Product and damaged because of the failure of the

CPS Product. This warranty covers the CPS Product and

connected equipment for as long as you own the CPS Product.

What must I do to make a warranty claim?

1. Call (877) 297-6937 or write to CyberPower, 4241 12th Ave.

E., STE 400, Shakopee, MN 55379 or send a message at

claims@cpsww.com for instructions.

2. Identify the Product, the Purchase Date, and the item(s) of

Connected Equipment.

3. Provide a dated Proof-of-Purchase receipt (or other proof of

the original purchase) and provide a description of the defect.

4. Pack and ship the product to CyberPower and, if requested,

the item(s) of Connected Equipment, and all claim forms that

CyberPower provides to you. Show the Claim Number on the

shipping label or include it with the product. You must prepay

all shipping costs, you are responsible for packaging and

shipment, and you must pay the cost of the repair estimate.

5. Do each of these within ten days of the occurrence.

What will CyberPower do to correct problems?

CyberPower will inspect and examine the CPS Product. If the

CPS Product is defective in material or workmanship,

CyberPower will repair or replace it at CyberPower’s expense, or

CyberPower will refund the full purchase price you paid for the

CPS Product (purchase receipt showing price paid is required).

If the CPS Product failed to protect any equipment plugged into

it, we will also send you forms for making your claim for the

connected equipment. We will repair or replace the equipment

that was damaged because of the failure of the CPS Product or

pay you the of fair market value (NOT REPLACEMENT COST)

the equipment at of the time of the damage. We will use Orion

Blue Book, another a third-party valuation guide, eBay, craigslist,

or other source to establish that amount. Our maximum liability is

limited to $75,000 for the CSP604T/CSP606T.

Who pays for shipping?

We pay when we send items to you; you pay when you send items

to us.

What are some things this Warranty does not cover?

1. THIS WARRANTY DOES NOT COVER ANY SOFTWARE THAT

WAS DAMAGED OR NEEDS TO BE REPLACED DUE TO THE

FAILURE OF THE CPS PRODUCT OR ANY DATA THAT IS

LOST AS A RESULT OF THE FAILURE OR THE

RESTORATION OF DATA OR RECORDS, OR THE REINSTAL-

LATION OF SOFTWARE.

2. This Warranty does not cover: misuse, modification, operation

or storage outside environmental limits of the CPS Product or

the equipment connected to it, or for damage while in transit or

in storage, nor if there has been improper operation or

maintenance, or use with items not designed or intended for

use with the CPS Product, such as laser printers, appliances,

aquariums, medical or life support devices, etc.

What are the other limitations?

The sole and exclusive remedies of the Initial Customer are those

provided by this Warranty.

1. This Warranty does not apply unless the CPS Product and the

connected equipment were connected to properly wired and

grounded outlets (including compliance with electrical and

safety codes of the most current electrical code), without the

use of any adapters or other connectors.

2. The CPS Product must have been plugged directly into the

power source and the equipment connected to the CPS

Product must be directly connected in the CPS Product, not

“daisy-chained” together in serial fashion with any extension

cords, another Product or device similar to the CPS Product,

surge suppressor, or power tap. Any such installation voids

the Warranty.

3. The CPS Product and connected equipment must have been

used properly in a suitable and proper environment, in

conformance with any applicable license, instruction manual,

or warnings.

4. The CPS Product must have been used at all times within the

limitations on the CPS Product’s VA capacity.

Where can I get more information?

Contact CyberPower at 4241 12th Ave E., STE 400, Shakopee,

MN 55379; call us at (877) 297-6937; or send us an e-mail

message at claims@cpsww.com.

PRODUCT REGISTRATION

Prompt product registration assures coverage under the Limited

Warranty, and also allows the opportunity to be notified of

product enhancements, upgrades, and other announcements.

Registration is quick and easy at www.cpsww.com/register.

CONTACT INFORMATION

CyberPower Systems, Inc.

4241 12th Avenue East Suite 400 Shakopee, MN 55379

Toll-free: 1-877-297-6937 | CPSww.com

This devise is manufactured using environmentally-safe

procedures in compliance with the Restriction on

Hazardous Substances (RoHS) directive.

Please join CyberPower in caring for the

environment by recycling this manual.

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	Ikke kategoriseret
Model:	Professional CSP606T
Tænd-/slukkontakt:	Ja
Produktfarve:	Sort
Responstid:	0.001 ms
Fjernbetjening inkluderet:	Ingen
Certificering:	UL1449 3, cUL
Kabellængde:	1.8 m
Bæredygtighedscertifikater:	RoHS
Antal RJ-11-porte:	2
Forbedret kabelstyring:	Ingen
Nominel indgangsspænding:	125 V
AC udgange, antal:	6 AC stikkontakt(er)
AC stikkontakt typer:	NEMA 5–15R
Overspænding energivurdering:	1350 J
EMI/RFI støjfiltrering:	Ja
Telefonlinje beskyttelse:	Ja
Netværk linje beskyttelse:	Ingen
Spændingsblokering:	400 V
Indgangsforbindelser:	NEMA 5-15P
Cable (Coax) protection:	Ingen
Audio/videolinje beskyttelse:	Ingen