CyberPower R22U24CTR Manual

CyberPower Ikke kategoriseret R22U24CTR

Læs gratis den danske manual til CyberPower R22U24CTR (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om CyberPower R22U24CTR, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

PACKAGE CONTENTS

• 1, 2.4A USB Charger Wall Outlet

• 1, white decora-style wall plate

• Screws: 2 long and 2 short

• User’s Manual

FEATURES

USER’S MANUAL

USB Charger Wall Outlet

R22U24CTR

USB Charger Wall Outlet

R22U24CTR

1 2

We recommend that the installation of the USB charger wall

outlet is performed by a professional electrician. For information

about electrical speciﬁcations, see SPECIFICATIONS.

• Replaces a standard duplex outlet

• Quickly charges USB devices

• Tamper-resistant outlets for added safety

• Provides two USB ports with 2.4A total output

• Provides two standard 125V power outlets

• Works in nearly all installations

• Compatible with your existing decora wall plate

AC outlet

USB Ports

Hot

(Black) Neutral

(White)

Ground

(Green)

Front Rear

9. Secure the wall plate to the

charger outlet with the two

short screws (provided).

8. Secure the charger outlet to

the wall box with the two

long screws (provided).

10. Restore power by replacing the fuse or turning on the

circuit breaker. The charger outlet is ready to use.

USING THE CHARGER OUTLET

• To charge USB devices (like mobile phones or tablets),

plug USB cables into the USB ports on the charger outlet

and into the USB ports on the devices.

• To power electrical devices (like lamps or notebooks),

plug them into the electrical outlets.

SPECIFICATIONS

Warnings

• RISK OF ELECTRIC SHOCK — Use only in dry locations and

only indoors.

• All cables should be routed away from the charger outlet

openings.

• DO NOT use with any aquarium equipment.

• DO NOT install in an outlet that is not grounded.

Notes to the installer

• This device must be installed in accordance with National and

Local electrical codes.

• To prevent severe shock or electrocution, always turn power

OFF at the service panel before working with wiring.

• This device should be used with copper or copper-clad wire.

DO NOT use with aluminum wire.

• DO NOT plug this device into a shallow wall box. The wall box

must be deep enough to house the charger outlet. If the box

is too shallow, the charger outlet will not ﬁt securely into the

wall.

INSTALLING THE CHARGER

1. Warning: DISCONNECT POWER. Failure to do so can

result in severe injury or death.

Make sure that you disconnect power to the circuit by

removing the fuse from the circuit breaker or turning

OFF the circuit breaker.

2. Remove the wall plate and mounting screws that cover

the old outlet.

3. Carefully remove the existing outlet from the wall box.

4. Disconnect the wiring from the old outlet. Note the

wire positions. Connect the charger outlet wires the

same way.

5. Connect the wires to the charger outlet:

• Black lead attaches to the hot wire(s)

• White lead attaches to the neutral wire(s)

• Green lead attaches to the ground wire(s)

You can attach the wires by:

(1) Inserting straight wires into the holes

(2) Wrapping the wires 3/4 of the way around the

terminal screws, making sure that the wires do not

overlap.

6. Tighten every screw and make sure that no bare

copper wire is exposed. When tightening screws, use

14 pounds-per-inch of torque.

7. Carefully insert the charger outlet into the wall box.

Dimensions (L x W x H)

With Plate:

Without Plate:

4.7 × 3 × 1.9 in. (120 × 76 × 47.5 mm)

4.2 × 1.7 × 1.9 in. (106 x 43 x 47.5 mm)

Electrical

Receptacle Rating:

USB Rating:

Line Voltage:

Wire Terminals:

15Amp, 125VAC

Two USB ports with total 2.4A, 5V DC

125V AC @ 60 Hz

#14-#12 AWG

TECHNICAL SUPPORT

Please contact our Tech Support department with

installation, troubleshooting, or general product questions.

• Phone: 1-877-297-6937

• Email: tech@cpsww.com

• Hours of Operation: Monday – Friday, 8:00am – 5:00pm

CST

1 YEAR LIMITED WARRANTY

Read the following terms and conditions carefully before

using the CyberPower R22U24CTR (the “CPS Product”).

By using the CPS Product, you consent to be bound by

the terms and conditions of this 1 Year Limited Warranty

(together referred to as this “Warranty”).

IF YOU DO NOT AGREE TO THE TERMS AND

CONDITIONS OF THIS WARRANTY, YOU SHOULD

RETURN THE PRODUCT FOR A FULL REFUND PRIOR TO

USING IT.

Who is providing this Warranty, what does it cover?

Cyber Power Systems (USA), Inc. (“CyberPower”)

provides this Limited Warranty. It only covers the original

purchaser and ends if you no longer own the CPS

Product. This warranty covers defects in materials and

workmanship in the CPS Product under normal use and

conditions. This Warranty covers the CPS Product for as

long as you own the CPS Product.

What must I do to make a warranty claim?

1. Pack and ship the product with a dated

Proof-of-Purchase receipt to CyberPower at 4241 12th

Ave E, Suite 400, Shakopee, MN 55379;

2. Clearly indicate on the outside of the packaging that

this is a WARRANTY RETURN;

3. Clearly include your name and address

a. on the outside packaging and

b. on a sheet of paper enclosed in the box with the

product that is being returned; and

4. You MUST prepay all shipping costs and you are

responsible for packaging and shipment.

Who pays for shipping?

We pay when we send items to you; you pay when you

send items to us.

What are some things this Warranty does not cover?

1. THIS WARRANTY DOES NOT COVER ANY SOFTWARE

THAT WAS DAMAGED OR NEEDS TO BE REPLACED

DUE TO THE FAILURE OF THE CPS PRODUCT OR ANY

DATA THAT IS LOST AS A RESULT OF THE FAILURE

OR THE RESTORATION OF DATA OR RECORDS, OR

THE REINSTALLATION OF SOFTWARE.

2. This Warranty does not cover: misuse, modiﬁcation,

operation or storage outside environmental limits of

the CPS Product or the equipment connected to it, or

for damage while in transit or in storage, nor if there

has been improper operation or maintenance, or use

with items not designed or intended for use with the

CPS Product, such as laser printers, appliances,

aquariums, medical or life support devices, etc.

What are the other limitations?

The sole and exclusive remedies of the Initial Customer

are those provided by this Warranty.

1. This Warranty does not apply unless the CPS Product

and the connected equipment were connected to

properly wired and grounded outlets (including

compliance with electrical and safety codes of the

most current electrical code), without the use of any

adapters or other connectors.

2. The CPS Product must have been plugged directly into

the power source and the equipment connected to the

CPS Product must be directly connected in the CPS

Product, not “daisy-chained” together in serial fashion

with any extension cords, another Product or device

similar to the CPS Product, surge suppressor, or power

tap. Any such installation voids the Warranty.

3. The CPS Product and connected equipment must have

been used properly in a suitable and proper

environment, in conformance with any applicable

license, instruction manual, or warnings.

4. The CPS Product must have been used at all times

within the limitations on the CPS Product’s VA

capacity.

Where can I get more information?

Contact CyberPower at 4241 12th Ave E., STE 400,

Shakopee, MN 55379; call us at (877) 297-6937; or send

us an e-mail message at claims@cpsww.com.

PRODUCT REGISTRATION

Prompt product registration assures coverage under the

Limited Warranty, and also allows the opportunity to be

notiﬁed of product enhancements, upgrades, and other

announcements. Registration is quick and easy. Go to

Product Registration page at www.cyberpower.com.

CONTACT INFORMATION

Cyber Power Systems, Inc. 4241 12th Avenue East Suite

400 Shakopee, MN 55379

Toll-free: 1-877-297-6937 | CyberPower.com This device is manufactured using environmentally-

safe procedures in compliance with the Restriction of

Hazardous Substances (RoHS) directive.

Please join CyberPower in caring for the

environment by recycling this manual.

K01-0000609-00

3 4

FCC Statement

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2)

this device must accept any interference received,

including interference that may cause undesired

operation.

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment o

and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

Warning: Changes or modiﬁcations not expressly

approved by the party responsible for compliance could

void the user's authority to operate the equipment.

ICES-003: This Class B digital apparatus complies with

Canadian ICES-003.

www.cyberpower.com

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	Ikke kategoriseret
Model:	R22U24CTR

Har du brug for hjælp?

Hvis du har brug for hjælp til CyberPower R22U24CTR stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret CyberPower Manualer

CyberPower PDU31009 Manual

20 August 2025

CyberPower CR6U61002 Manual

20 August 2025

CyberPower SM30KPMX Manual

20 August 2025

CyberPower PDU31414 Manual

20 August 2025

CyberPower PDU41404 Manual

19 August 2025

CyberPower SM10KADFA Manual

29 Juli 2025

CyberPower SM10KASPA Manual

29 Juli 2025

CyberPower P2WU Manual

24 Juli 2025

CyberPower PDU81102 Manual

22 Juli 2025

CyberPower PDU31005 Manual

22 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

DataVideo PP-ONE X Manual

27 August 2025

Cougar LX500 Manual

27 August 2025

ENTES MM-122 Manual

27 August 2025

Tefal Principio TT1108 Manual

27 August 2025

Sauermann CP 210-R Manual

27 August 2025

ENTES MPR-47S-D Manual

27 August 2025

Panduit VS-AVT-C08-L10 Manual

27 August 2025

Deye SUN-10.5K-G02P1-AU-AM2 Manual

27 August 2025

Dorr CV-02 Manual

27 August 2025

Antelope Audio Eclipse 384 Manual

27 August 2025