CyberPower SNEV001 Manual

CyberPower Ikke kategoriseret SNEV001

Læs gratis den danske manual til CyberPower SNEV001 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 14 anmeldelser. Har du et spørgsmål om CyberPower SNEV001, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

ENVIRONMENTAL SENSOR

SNEV001

USER MANUAL

YOUR ULTIMATE ALLY IN POWER

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400 | Shakopee, MN 55379

CyberPowerSystems.com

PACKAGE CONTENTS

1. SNEV001

2. Hook and loop tape

3. User Manual

4. Flat Head Screw (M3x20) with plastic nylon anchors

5. CAT5 RJ45 Ethernet Cable (10 ft. / 3.0 m)

Dry Contact

External Sensor 1/2/3/4

OVERVIEW

The CyberPower environmental sensor (SNEV001) along

with selected Remote Management Cards (RMCARDXXX)

or most Switched and Monitored PDUs enables users to

monitor the temperature and humidity of a server closet and/

or data center remotely. With CyberPower’s PowerPanel®

Business software, users can establish thresholds that will

automatically notify users when an event has occurred via

email, SMS and SNMP traps. Additionally, the SNEV001

provides four input dry contacts that enable users to monitor

the status of connected devices, such as door switch sensors.

FEATURES

• Real time environment monitoring

• Remote management and conﬁguration of the sensor via

Web Browsers or NMS

• Automatic events notiﬁcation via email, SMS and

SNMP traps

• Four input dry contacts application interface provided

• Displays the name and location of the sensor and

connected devices

A. Status LED

B. Input Dry Contact 1-4

C. Common Connection

D. RJ45 Port

Connect to RMCARD/PDU or previous on-line SNEV001

E. RJ45 Port

Connect to next SNEV001

Input Dry Contact Application

Do not input signals that carry voltage into the input

dry contacts. The input dry contacts only allow for

open/short circuit.

SPECIFICATIONS

Model Number: SNEV001

Input Voltage: 7V - 28V

Temperature: 14-158°F with accuracy +/- 0.9°F

-10-70°C with accuracy +/- 0.5°C

Humidity: 10-90 RH with accuracy +/- 2%

Connection Port: RJ45 Port

Daisy Chain x 8 maximum

Input Dry Contact: 4

Dimensions: 2.63 x 2.08 x 1.14 in.

67 x 53 x 29 mm

Weight: 1.69 oz / 48 g

Safety Approvals: FCC Class B, CE, EAC

Warranty: 3-Year Limited

i WARNING: This product can expose you to chemicals including bisphenol A (BPA)

and styrene (ABS), which is known to the State of California to cause reproductive

harm and cancer. For more information, go to www.P65Warnings.ca.gov.

B C D E

FOR MORE INFORMATION

Visit CyberPowerSystems.com for more information regarding:

• Product information and certiﬁcations

• Product warranty

• Connected equipment guarantee

TECHNICAL SUPPORT

Visit: CyberPowerSystems.com/support

Toll-Free: 1-877-297-6937

All other trademarks are the property of their respective owners.

INSTALLATION GUIDE

Method 1: Hook and Loop Tape Mounting

Step 1. Clean the surface of the area where the sensor will

be installed. Apply one side of the hook and loop tape to

the bottom of the sensor and the other side to the sensor

location.

Step 2. Attach the sensor on the surface and hold for about

5 seconds to ensure cohesion.

NOTE: Once the sensor is installed, you will want to leave it

in place to ensure the the hook and loop tape maintains its

adhesiveness.

Step 3. To connect the sensor

with RMCARD/PDU, use

the attached RJ45 Ethernet

Cable. Plug one end into the

RJ45 Port (DATA IN) and the

other end into the RMCARD/

PDU. Furthermore, if daisy

chain function is needed, plug

one end into the RJ45 Port

(DATA OUT) and the other

end into the RJ45 Port (DATA

IN) of another sensor.

NOTE: If the distance of

RMCARD/PDU and the sensor

is longer than 10 feet/3.05 m,

use a standard RJ45 Ethernet

Cable as needed (max 50

feet/15 m).

WARNING: Maximum

daisy chain: 8 pcs

TROUBLESHOOTING

Method 2: Fixed Mounting

Step 1. Drill a hole that is

compatible with the anchor

and insert the included anchor.

Step 2. Insert and tighten the

screw into the anchor. Leave

enough of the screw exposed

for the sensor to be mounted to.

Step 3. Hang the sensor

horizontally or vertically.

CONFORMANCE APPROVALS

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may

cause undesired operation.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modiﬁcations not expressly approved by the

party responsible for compliance could void the user’s authority to

operate the equipment.

Step 4. To connect the sensor with

RMCARD/PDU, use the attached

RJ45 Ethernet Cable. Plug one end

into the RJ45 Port (DATA IN) and

the other end into the RMCARD/

PDU. Furthermore, if daisy chain

function is needed, plug one end

into the RJ45 Port (DATA OUT)

and the other end into the RJ45

Port (DATA IN) of another sensor.

For further conﬁguration

information, please refer to the

RMCARD/PDU user’s manual.

Problem Solution

The RMCARD/PDU is not

able to acquire environment

sensor’s information

Check the LED.

When the connection is

ok, the LED should always

be on; otherwise, ensure

the RJ45 Ethernet cable is

correctly connected to the

RMCARD/PDU and sensor.

Note: Do not use a crossover

cable which is for Tx/Rx.

The Input Dry Contact does

not function correctly

Ensure the Input Dry

Contact wires are correctly

connected and make sure

the open/short circuit

setting of the connected

devices is the same as

the setting on the Web

Interface.

HoleØ6mm(0.24in)

DISPOSAL

The Waste Electrical and Electronic Equipment (WEEE) Directive

aims to contribute to sustainable production and consumption by

contributing to the ecient use of resources and the retrieval of

secondary raw materials through re-use, recycling and other forms of

recovery. The symbol on this product and/or its packaging indicates

that the product must be disposed of separately from ordinary

household wastes at its end of life. Contact your related WEEE

management authority, local oce, or your household waste disposal

service about information on the recycling drop o site.

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	Ikke kategoriseret
Model:	SNEV001
Bredde:	53 mm
Dybde:	67 mm
Højde:	29 mm
Vægt:	48 g
Produktfarve:	Grå
Produkttype:	Enhed til miljøovervågning
Pakkevægt:	400 g
Pakkedybde:	60 mm
Pakkebredde:	170 mm
Pakkehøjde:	165 mm
Ethernet LAN-porte (RJ-45):	2
Certificering:	CE, FCC Class B, EAC, RoHS
Harmoniseret systemkode (HS):	8473302000
Intern:	Ingen
Oprindelsesland:	Kina
Output-grænseflade:	RJ-45