Da-Lite 99622 Manual

Da-Lite Ikke kategoriseret 99622

Læs gratis den danske manual til Da-Lite 99622 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Da-Lite 99622, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574-267-8101
800-622-3737
Fax: 574-267-7804
Toll Free Fax: 877-325-4832
www.da-lite.com
e-mail: info@da-lite.com
POWER
PRESENTATION PRODUCTS
The
In
Installation Instructions for
VIDEO PROJECTOR INTERFACE
CAUTION: THE PROJECTOR MUST BE TURNED OFF BEFORE CONNECTING THE TRIGGER WIRES TO THE PROJECTOR. FAILURE
TO DO SO MAY DAMAGE THE CONTROLLER.
1. Use 2-conductor 20-24 gauge wire to extend the low voltage connection from the projector’s 5 or 12-volt screen
trigger output to the length required to reach the VPI. When extending the low voltage connection from the
projector’s screen trigger output, be sure to maintain the proper polarity. the red wire from the VPI is the “signal”
and the black wire from the VPI is the “ground”.
2. Connect the wires from the VPI that are labeled “Low Voltage Connection” to the end of the extended screen
trigger wires above. See Figure 1.
CAUTION: NEVER APPLY VOLTAGE TO THE PROJECTOR’S SCREEN TRIGGER WIRES OR THE VPI AND/OR PROJECTOR WILL BE
DAMAGED.
VIDEO PROJECTOR INTERFACE INSTALLATION
1
The Video Projector Interface (VPI) housing is divided into three compartments. The compartment labeled “Low Voltage
Connections” is where you will connect the VPI to the projector’s output and wall switch wire connections. The
compartment labeled “AC Power Connections” is where the main power and motor wire connections are made. Access
is not required to the center compartment.
WARNING: TO PREVENT ELECTRICAL SHOCK OR DAMAGE TO THE VIDEO PROJECTOR INTERFACE (VPI), DO NOT APPLY
POWER TO THE VPI UNTIL ALL CONNECTIONS ARE COMPLETE. MAKE SURE POWER IS TURNED OFF ON ALL CIRCUITS
BEFORE MAKING CONNECTIONS.
CAUTION: ANY ITEM BEING CONNECTED TO THE VPI CANNOT BE ENERGIZED.
▲
!
LOW VOLTAGE CONNECTION
RED
BLACK
RED
BLACK
5/12 VOLT SCREEN
TRIGGER ON
PROJECTOR
5/12 VOLT SCREEN
TRIGGER ON
PROJECTOR
RECOMMENDED WIRE SIZE: 20-24 AWG RECOMMENDED WIRE SIZE: 20-24 AWG
FIGURE 1
120V 240V
▲
!
▲
!
▲
!

Produkt Specifikationer

Mærke: Da-Lite
Kategori: Ikke kategoriseret
Model: 99622

Har du brug for hjælp?

Hvis du har brug for hjælp til Da-Lite 99622 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Da-Lite Manualer

Da-Lite

Da-Lite Parallax 29849 Manual

12 Oktober 2024
Da-Lite

Da-Lite Wireline Advantage 29869E Manual

30 September 2024
Da-Lite

Da-Lite Flex Plex 29535 Manual

29 September 2024
Da-Lite

Da-Lite Lexington 83146 Manual

16 September 2024
Da-Lite

Da-Lite Wireline Advantage 29872G Manual

14 September 2024
Da-Lite

Da-Lite Da-Lift 15 78088 Manual

14 September 2024
Da-Lite

Da-Lite Parallax 29843 Manual

10 September 2024
Da-Lite

Da-Lite Wireline Advantage 29870E Manual

7 September 2024
Da-Lite

Da-Lite Scenic Roller 40305 Manual

2 September 2024
Da-Lite

Da-Lite Lancaster 85450 Manual

1 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Zoom

Zoom A3 Manual

16 Juli 2025
DS18

DS18 SLG-FKP6 Manual

16 Juli 2025
CYP

CYP PU-1201-KIT Manual

16 Juli 2025
JUNG

JUNG 4008 TSM Manual

16 Juli 2025
Emko

Emko SMR1P1-00-00-01-00 Manual

16 Juli 2025
DS18

DS18 Hydro NXL-X6TP Manual

16 Juli 2025
CYP

CYP PUV-1350PL-TXWP Manual

16 Juli 2025
Audio Pro

Audio Pro VOL-1 Manual

16 Juli 2025
CYP

CYP PUV-2010TXWP Manual

16 Juli 2025
Hillvert

Hillvert HT-VC-400 Manual

16 Juli 2025