Da-Lite Lexington 83146 Manual

Da-Lite Ikke kategoriseret Lexington 83146

Læs gratis den danske manual til Da-Lite Lexington 83146 (15 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 61 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 31 anmeldelser. Har du et spørgsmål om Da-Lite Lexington 83146, eller vil du spørge andre brugere om produktet?

Side 1/15
Instruction Book for
LECTERN
DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574-267-8101
800-622-3737
Fax: 574-267-7804
Toll Free Fax: 877-325-4832
www.da-lite.com
e-mail: info@da-lite.com
The Da-Lite Difference.
Plug microphone into shock mount on reading surface.
Turn main power switch located under reading surface
on. Rotate "MAIN MIC", "TREBLE" and "BASS" controls
fully counterclockwise to minimum volume position. Turn
speaker switch located on dash panel to position. "on"
While speaking into the microphone, slowly increase
"MAIN MIC" volume by turning knob clockwise. Adjust
1
POWER
Connect power supply to 110/120 VAC 3-wire outlet
(220/240 VAC models to 220/240 VAC source).
READING LIGHT
Depress light switch to activate light. ADJUST VISOR AS
NECESSARY. Use GE 25T8DC 110v appliance lamp or
equivalent when relamping all 110/120 sound and non-
sound lecterns; GE 1176 12v for 220v lecterns.
DIGITAL CLOCK/COUNT DOWN TIMER
Select desired mode; adjust time with SET switch. Unit
will remain operational as long as the main power supply
is on. Power interruptions will cause the clock to NOTE:
flash until reset.
ALL MODELS
OPTIONAL HEIGHT ADJUSTMENT
Models with optional reading surface adjustment are
controlled by the switch marked HEIGHT and provide up
to 8 - 9 inches of elevation. To raise or lower, depress
HEIGHT switch.
SOUND MODELS
until feedback begins, then decrease volume to stable
condition or lower to desired volume level. Adjust bass
and treble controls to desired tonal quality. Turn
SPEAKER SWITCH to position when done using the "off"
sound system.
AUXILIARY MICROPHONE (XLR JACK)
The auxiliary mic input is located under the reading sur-
face and is used for a second mic or wireless micro-
phone input. The volume control is located on the dash
panel. The aux. mic input is balanced low impedance
(600 ) and is phantom powered so condenser type mi-
crophone can be used.
AUXILIARY LINE INPUT (1/4" PHONE JACK)
The auxiliary input is used for playback of tape player,
musical instrument, VCR, or an audio feed from another
sound system. The volume control is located on dash
panel.
AUXILIARY LINE OUTPUT (1
/4" PHONE JACK)
The signal output is a composite of all the inputs and can
be fed directly to an audio or video tape recorder. Or, the
line output can be fed to another sound system to com-
bine systems for greater output, or it may be fed to the
input of a hearing impaired system.
EXTERNAL SPEAKER OUTPUTS (1/4" PHONE JACK)
The external speaker outputs can be used to drive exter-
nal speakers in lieu of the internal lectern speaker. When
a plug is inserted into the external speaker jacks, the in-
ternal speaker is disconnected. The powerful (50 watts)
is adequate to drive several speakers provided the total
load impedance is not less than 2 ohms. The output of
the amplifier is self-protecting against overload; how-
ever, low impedance loads (below 2 ) will cause exces-
sive heating reducing amplifier output.


Produkt Specifikationer

Mærke: Da-Lite
Kategori: Ikke kategoriseret
Model: Lexington 83146

Har du brug for hjælp?

Hvis du har brug for hjælp til Da-Lite Lexington 83146 stil et spørgsmål nedenfor, og andre brugere vil svare dig