Da-Lite Lace And Grommet 20444 Manual

Da-Lite Ikke kategoriseret Lace And Grommet 20444

Læs gratis den danske manual til Da-Lite Lace And Grommet 20444 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Da-Lite Lace And Grommet 20444, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
INSTRUCTION BOOK FOR
Lace And Grommet
Screen Surfaces
2
Da-Lite Lace and Grommet screens are custom made to meet
the requirements for large surface installation of a relatively
permanent nature. Great care is taken in the production of these
screens to assure extreme serviceability and excellence of
picture reproduction. Maximum overall size is based on
fabric type.
The Lace and Grommet screen is trimmed with a strong 2"
webbing and grommets spaced uniformly every 6 inches. Lacing
cord, included at a slight extra charge, is laced through
grommets and fastened to hooks on frame. . . providing a
completely wrinkle-free surface.
If a Series 200 or 300 frame was purchased see the instructions
provided with the frame for assembly. If a frame is being built,
suggestions for their construction are provided on page 4.
Lace and Grommet style screens are not recommended unless
the stage has aly loft for safe storage of the screen when
it is not in use.
Screens are priced per square foot on overall screen sizes, which
are 4" larger each way than picture area. When ordering Lace
and Grommet custom made screens, please give the following
dimensions:
1. Overall size, including black webbing.
2. Net picture area, excluding black webbing.
Approximate shipping weight, 1/2 lb. per square foot.
Large projection screens will have one or more vertical seams.
Pre-Installation
Manufacturer's Precaution
Suggested Methods Of Installation
Each Da-lite Screen is carefully inspected, wrapped and packed
in a manner that insures delivery to destination in irst class
condition. Careless handling of screens during installation can
result in screen surface being wrinkled, torn or damaged.
Milestone does not assume responsibility
for such damage.
Conditions in theaters vary so greatly that no set of instructions
would be complete for each theater. The following suggestions,
regarding the installation, when supplemented with proper care
and good judgment in meeting local conditions will result in a
rapid and satisfactory installation.
Installing Screen to the frame: First, and most important, is to
handle the screen in a manner to prevent its being wrinkled
during installation.
Safest method is to lay the frame lat on a cleanloor and unroll
the screen inside the frame. Tie it in at all four corners to ensure
centering in the frame. Then lacing should be installed around all
four sides. Do not attempt to draw lacing tight until after the
frame is raised to a vertical position.
When necessary to install the screen to a frame already erected,
and one that cannot be taken down, it is necessary to stand the
rolled screen on end in front of the frame and tie it at frequent
intervals to the top of the frame as it is unrolled.
Before starting the actual lacing, we recommend tying the screen
to all four corners of the frame to insure its being spaced properly
inside the frame.
Things to Remember: Practically every installation will have its
own individual problem. For instance, you mayind in using your
old frame that it is not large enough to lace the screen on the
inside, in which case you would place the hooks on the front and
outer edge of the frame. For this purpose we recommend using
rooing nails every six inches, leaving one-fourth inch out of the
wood for the lacing cord.
Disclaimer
Milestone and its ailiated corporations and subsidiaries
(collectively "Milestone"), intend to make this manual accurate
and complete. However, Milestone makes no claim that the
information contained herein covers all details, conditions or
variations, nor does it provide for every possible contingency in
connection with the installation or use of this subject to change
without notice or obligation of any kind. Milestone makes no
representation of warranty, expressed or implied, regarding the
information contained herein. Milestone assumes no
responsibility for accuracy, completeness or suiciency of the
information contained in this document.
Da-Lite® is a registered trademark of Milestone AV Technologies.
All rights reserved.

Produkt Specifikationer

Mærke: Da-Lite
Kategori: Ikke kategoriseret
Model: Lace And Grommet 20444

Har du brug for hjælp?

Hvis du har brug for hjælp til Da-Lite Lace And Grommet 20444 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Da-Lite Manualer

Da-Lite

Da-Lite Parallax 29849 Manual

12 Oktober 2024
Da-Lite

Da-Lite Wireline Advantage 29869E Manual

30 September 2024
Da-Lite

Da-Lite Flex Plex 29535 Manual

29 September 2024
Da-Lite

Da-Lite Lexington 83146 Manual

16 September 2024
Da-Lite

Da-Lite Wireline Advantage 29872G Manual

14 September 2024
Da-Lite

Da-Lite Da-Lift 15 78088 Manual

14 September 2024
Da-Lite

Da-Lite Parallax 29843 Manual

10 September 2024
Da-Lite

Da-Lite Wireline Advantage 29870E Manual

7 September 2024
Da-Lite

Da-Lite Scenic Roller 40305 Manual

2 September 2024
Da-Lite

Da-Lite Lancaster 85450 Manual

1 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Asrock

Asrock Rack SPC621D8 Manual

16 Juli 2025
For.A

For.A FA-10DCCRU Manual

16 Juli 2025
CYP

CYP AU-DTO4-RX Manual

16 Juli 2025
Levenhuk

Levenhuk Zeno Lamp ZL23 Manual

16 Juli 2025
Motorola

Motorola MiT3000 Manual

16 Juli 2025
Hillvert

Hillvert HT-PT-360 Manual

16 Juli 2025
CYP

CYP PUV-1610RX Manual

16 Juli 2025
Rockville

Rockville RM50RT-B Manual

16 Juli 2025
DS18

DS18 RCNLP/BK Manual

16 Juli 2025
CYP

CYP EL-7500V Manual

16 Juli 2025