Daewoo DTQ27S2FCV Manual
Daewoo
televisión
DTQ27S2FCV
Læs nedenfor 📖 manual på dansk for Daewoo DTQ27S2FCV (32 sider) i kategorien televisión. Denne guide var nyttig for 15 personer og blev bedømt med 5.0 stjerner i gennemsnit af 8 brugere
Side 1/32
Colo r Televisio n
INSTRUCTION MANUAL
DTQ 25S2FCV
DTQ 27S2FCV
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and servicing instructions in the literature accompany-
ing the appliance.
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
NOTE TO CATV SYSTEM INSTALLER
THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER'S ATTENTION TO
ARTICLE 820-40 OF THE NEC THAT PROVIDES GUIDELINES FOR PROPER GROUNDING
AND, IN PARTICULAR, SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO
THE GROUNDING SYSTEM OF THE BUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY
AS PRACTICAL.
CAUTION
The AC power cord provided with this product is polarized (one blade wider than the other).
To provide power to the TV, insert the AC plug into a standard 120V 60Hz polarized outlet.
NOTE
Never connect the plug to an electrical source other than one providing 120V 60Hz power. Use only the
attached power cord. If the polarized AC cord does not fit into a non-polarized outlet, do not cut or file
the blade. You are responsible for having the obsolete outlet replaced with a polarized outlet.
If you feel a static discharge when touching the unit, and the unit does not function, simply unplug the
unit from the outlet. When you plug the unit back in, it should work normally.
Do not install power cords near any heating element or cooking appliances.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Daewoo Electronics
Corporation of America
120 Chubb Avenue,
Lyndhurst, NJ 07071
1-800-DAEWOO8 (1-800-323-9668)
Fax:201-935-5284
Dear Customer :
Daewoo Electronics Corporation of America would like to thank you for choosing this color
television receiver. It incorporates a host of features designed to give you excellent perfor-
mance for many years to come.
We realize that you’re eager to turn it on and begin enjoying the high-quality pictures it
delivers just as quickly as possible, but we ask you to take a few minutes to read the
instructions in the booklet to familiarize yourself with the receiver, its functions and some
features which may be new to you. If you follow the instructions, this unit should give you
many years of viewing pleasure.
If for any reason it does not, we want to hear about it. Please write to us at the address
above. Daewoo always welcomes comments and suggestions on this or any of our other
products.
On the other hand, when you discover the enjoyment, reliability and ease of use that is
built into it, we hope that you will tell your friends, and consider Daewoo when you make
your next purchase of home entertainment equipment.
In addition to TV receivers, Daewoo produces a full line of audiovisual products built to the
same high design, engineering, and manufacturing standards as this unit.
Here are a few tips that will keep your TV receiver looking great and performing for years
to come.
● Avoid putting it in excessively hot locations. Damage to the cabinet or premature com-
ponent failures can result.
● There are ventilation holes in the bottom and rear of the cabinet. Make sure that they
remain unobstructed. Do not place the receiver on top of a thick cloth.
● If you don’t plan to use the receiver for several days, it’s a good idea to unplug it from
the power outlet.
● Many common household cleaning agents, sprays, solvents, and polishes will cause per-
manent damage to the surface of the cabinet. The best cleaning agents are mild soap
and a damp cloth.
Again, thank you for choosing this Daewoo product. We have employed advanced engineer-
ing techniques in its design, and manufactured it in one of the world’s most up-to-date
production facilities. The result is a TV receiver that we know you will be as proud to own
as we were to create.
Very truly yours,
DAEWOO ELECTRONICS
CORPORATION OF AMERICA
Table of Contents
Important Safeguards 2
Chapter 1: Overview of Your Equipment 4
Your TV's Front Panel 4
Your TV's Back Panel 4
Your Remote Control 5
Installing your remote control batteries 6
Notes 6
Chapter 2: Connecting an Antenna or Cable to Your TV 7
Connecting an Antenna 7
Connecting a Cable System 8
Connecting Other Pieces of Equipment 9
Safety Note 9
Chapter 3: Operating Your TV 10
Turning your TV On 10
Programming Your TV's Channel Memory 10
Changing Channels 11
Changing the Volume 11
Changing The TV's Channel Memory 11
Adding a channel to memory 11
Erasing a channel from memory 12
Changing the TV's channel memory with the menus 12
Changing the TV’s Input 13
Changing the TV’s Input with the remote control 13
Displaying the Current Channel 13
Adjusting Video Settings 14
Returning to factory settings 15
Descriptions of video settings 15
Chapter 4 : Setting the Sound 16
Changing the Sound Mode 16
Chapter 5: Using Timer Functions 17
Accessing the Timer Menu 17
Setting the Clock 17
Setting the On Timer 18
Setting the Off Timer 18
Canceling the On Timer or Off Timer 19
Setting the Sleep Timer 19
Chapter 6 : Additional Features 20
Changing the Language of the On-Screen Menus 20
Captioning 20
About captions 21
Parental Control Settings 22
Protection Features 26
Automatic blue screen 26
Automatic power off 26
Chapter 7 : Troubleshooting 27
Warranty 28
Table of Contents
1
CONTENTS
important safeguards
S A F E T Y
2
IMPORTANT SAFEGUARDS
PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIP-
MENT AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND
INSTRUCTIONS MARKED ON THE TV RECEIVER.
1Read all of these instructions.
2Save these instructions for later use.
3Unplug this television equipment from the
wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
4Do not use attachments not recommended
by the television equipment manufacturer
as they may result in the risk of fire,
electric shock or other personal injury.
5Do not use this television equipment near
water, for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in
a wet basement, or near a swimming pool,
or the like.
6Do not place this television equipment on
an unstable cart, stand, or table, The
television equipment may fall, causing
serious injury to a child or adult, and
serious damage to the equipment. Use only
with a cart or stand recommended by the
manufacturer, or sold with the television
equipment. Wall or shelf mounting should
follow the manufacturer's instructions, and
should use a mounting kit approved by the
manufacturer.
6A An appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surface may
cause the appliance and cart combination
to overturn.
7Slots and openings in the cabinet and the
back or bottom are provided for ventilation
and to ensure reliable operation of the
television equipment; and to protect it
from overheating, these opening, must not
be blocked or covered. The opening should
never be blocked by placing the television
equipment on a bed, sofa, rug, or other
similar surface. (This equipment should
never be placed near or over a radiator or
heat register.) This television equipment
should not be placed in a built-in
installation such as a bookcase unless
proper ventilation is provided.
8This television equipment should be
operated only from the type of power
source indicated on the marking label. If
you are not sure of the type of power
supplied to your home, consult your
television dealer or local power company.
9This television equipment is equipped with
a polarized alternating current line plug (a
plug having one blade wider than the
other). This plug will fit into the power
outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug.
If the plug should still fail to fit, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of
the polarized plug.
10 Do not allow anything to rest on the power
cord. Do not locate this television
equipment where the cord will be abused
by persons walking on it.
11 Follow all warnings and instructions
marked on the television equipment.
12 For added protection for this television
equipment during a lightning storm, or
when it is left unattended and unused for
long periods of time, unplug it from the
wall outlet and disconnect the antenna or
cable system. This will prevent damage to
the equipment due to lightning and power-
line surges.
13 An outside antenna system should not be
located in the vicinity of overhead power
lines or other electric light or power
circuits, or where it can fall into such
power lines or circuits. When installing an
outside antenna system, extreme care
should be taken to keep from touching
such power lines or circuits as contact with
them might be fatal.
14 Do not overload wall outlets and extension
cords as this can result in fire or electric
shock.
15 Never push objects of any kind into this
television equipment through openings as
they may touch dangerous voltage points
or short-out parts that could result in a fire
or electric shock. Never spill liquid of any
kind on the television equipment.
16 Do not attempt to service this television
equipment yourself as opening or
removing covers may expose you to
dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
17 Unplug this television equipment from the
wall outlet and refer servicing to qualified
service personnel under the following
conditions:
(a) When the power-supply cord or plug is
damaged or frayed.
(b) If liquid has been spilled, or objects
have fallen into the television
equipment.
(c) If the television equipment has been
exposed to rain or water.
(d) If the television equipment does not
operate normally by following the
operating instructions. Adjust only
those controls that are covered by the
operating instructions as an improper
adjustment of other controls may result
in damage and will often require
extensive work by a qualified
technician to restore the TV receiver to
its normal operation.
(e) If the television equipment has been
dropped or the cabinet has been
damaged.
(f) When the television equipment exhibits
a distinct change in performance - this
indicates a need for service.
18 When replacement parts are required, be
sure the service technician has used
replacement parts specified by the
manufacturer that have the same
characteristics as the original part.
Unauthorized substitutions may result in
fire, electric shock or other hazards.
19 Upon completion of any service or repairs
to this television equipment, ask the
service technician to perform safety checks
to determine that the television is in a safe
operating condition.
20 If an outside antenna or cable system is
connected to the television receiver, be
sure the antenna or cable system is
grounded so as to provided some
protection against voltage surges and built-
up static charges.
Section 810 of the National Electrical
Code, ANSI/NFPA N0.70-1984, provides
information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of
grounding conductors, location of antenna-
discharge unit, connection to grounding
electrodes, and requirements for the
grounding electrode.
3
important safeguards
ANTEENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-20)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
NEC-NATIONAL ELECTRICAL CODE
GROUND
CLAMP
EXAMPLE OF ANTENNA GROUNDING
Your TV comes with a remote control. The section below summarizes the buttons, con-
trols, and terminals that you will use with your TV.
Your TV's Front Panel
1 POWER
Use this button to turn your TV on or off.
2VCHW
Use these buttons to change channels on your TV, or to select items in the menu
system.
3 C BVOL
Use these buttons to change your TV's volume, to activate selections in the menu
system, or to change audio and video settings.
4 MENU
Use this button to turn the TV's menu system on and off.
5 Remote control receiver
This receiver receives a signal from your remote control. Do not block it.
Your TV's Back Panel
1 Antenna terminal (ANT)
Use this terminal to attach an antenna or cable system
to your TV.
2 Video IN
This terminal allows the TV to receive a video signal
from another component, such as a VCR.
3 Audio L/Mono IN
This terminal allows the TV to receive an audio
L/mono signal from another component, such as a
VCR.
4 Audio R IN
This terminal allows the TV to receive an audio R sig-
nal from another component, such as a VCR.
CHAPTER
1
4
Chapter 1 : Overview of Your Equipment
Overview of Your Equipment
1 POWER
Use this button to turn your TV on or off.
2VCHW
Use these buttons to change channels on your
TV, or select items in the menu system.
3 VOLC B
Use these buttons to change your TV's volume,
to activate selections in the menu system, or to
change audio and video settings.
4 MENU
Use this button to turn the TV's menu system
on and off.
5 RECALL
Press this button to display the channel number.
6 ADD/ERA
Use this button to add a channel to the TV's
memory or erase the channel from memory.
7 MUTE
Use to turn the TV's sound on and off.
8 0-9
Use these buttons to change channels.
9 SLEEP
Use this button to program the TV to turn off
after a certain time.
10 PREV. CH
Press this button to return to the previous chan-
nel you were watching.
11 TV/VIDEO
Press this button to select the TV’s Input (TV
or VIDEO).
12 AUTO. PICT
Press this button to return the TV's video set-
tings to their original level.
13 AIR/CABLE
Use the button to set up your TV to receive sig-
nals from an antenna (AIR) or a cable system
(CABLE).
5
Chapter 1 : Overview of Your Equipment
Your Remote Control
1
2
33
4
5
6
8
9
11
10
12
13
7
2
Installing your remote control batteries
1Open the battery compartment on the back of the remote control.
2Install two AAA-size batteries (not included) as shown. Make sure the “+” and “-”
terminals are oriented correctly.
3Replace the cover.
Notes
Do not mix different types of batteries, or mix an old and a new battery.
Remove and replace weak batteries. Weak batteries can leak and damage your con-
troller. Dispose of batteries properly; never throw them into a fire.
Point your remote at the receiver on the center of the front of the TV. Make sure the
receiver is not blocked.
The remote control can operate up to 30 feet away from the TV, if you are directly fac-
ing the front of the TV. Operating distance diminishes as you move to the sides of the
TV
6
Chapter 1 : Overview of Your Equipment
123
Chapter 2 : Connecting an Antenna or Cable to Your TV
Your TV will provide you with the best performance if you connect it to an external
antenna or cable system. Follow the directions below make this connection. Please note
that you will normally only have to make one of the connections shown below, not all of
them.
All connections will be made to the antenna terminal on the back of your TV. The anten-
na terminal is a silver metal post partially surrounded by two plastic tabs. For help in
locating the antenna terminal, see “Your TV's Back Panel” on page 4.
There is no rod antenna (“rabbit ears”) provided with your TV.
Connecting an Antenna
If your antenna ends in a single coaxial
lead, simply press or screw the cable onto the
antenna terminal on the back of your TV.
If your antenna ends in a pair of 300 ohm twin leads, you must use a 300-ohm/75-
ohm adaptor. Place the leads underneath the screws on the adaptor, tighten the screws,
then press the adaptor onto the antenna terminal on the back of the TV.
7
CHAPTER
2
Connecting an Antenna or Cable to Your TV
Chapter 2 : Connecting an Antenna or Cable to Your TV
8
Antennas with two sets of leads
You might have two sets of leads from your antenna system, especially if you have one
antenna for VHF signals and one antenna for UHF signals.
If your antenna system has both a coaxial lead and twin 300-ohm leads, you must
obtain a combiner (available at your local electronics store). Press or screw the coaxial
lead onto the combiner; place the twin leads underneath the screws on the combiner and
tighten the screws. Press the cable from combiner onto the antenna terminal on the back
of your TV.
If your antenna system has two sets of twin 300-ohm leads, you must obtain a com-
biner (available at your local electronics store). Place one set of twin leads underneath
the screws on the combiner and tighten the screws. Do the same with the other set of
twin leads. Press the cable from the combiner onto antenna terminal on the back of your
TV.
Connecting a cable system
If your cable set-up is not described below, please contact your cable company for more
information.
If your cable system does not require the use
of a cable box, simply press or screw the
incoming cable onto the antenna terminal on the
back of your TV.
Chapter 2 : Connecting an Antenna or Cable to Your TV
If your cable system requires you to use a converter box for all channels, connect
the incoming cable to the IN terminal on the converter box. Connect another cable
between the OUT terminal on the converter box and the antenna terminal on the TV.
You will need to keep your TV tuned to channel 3 or 4 and change channels using the
converter box.
If your cable system only requires you to use a converter box for some channels (i.
e. pay-TV channels), follow these steps: Find the primary incoming coaxial cable. Plug
this cable into a splitter (available at your local electronics store). Connect one coaxial
cable between one OUT terminal on the splitter and the IN terminal on the converter
box. Connect another coaxial cable between the other OUT terminal on the splitter and
the B-IN terminal on an A/B switch (available at your local electronics store.) Connect a
third coaxial cable between the OUT terminal on the converter box and the A-IN termi-
nal on the A/B switch. Finally, connect a coaxial cable between the OUT terminal on the
A/B switch and the antenna terminal on the back of your TV.
When the A/B switch is in the A position, you need to change channels on the converter
box (and your TV should be tuned to channel 3 or 4); when the A/B switch is in the B
position you can change channels on the TV.
Connecting Other Pieces of Equipment
You may want to connect a VCR, laser disc player, satellite receiver, or another type of
equipment to your TV. We recommend that you follow the instructions included with
the piece of equipment you wish to connect.
Safety Note
If you plan on being away from your home for an extended period of time, or if a thun-
derstorm is approaching, you should unplug your television, and you may wish to dis-
connect your TV from a rooftop or satellite antenna. You do not need to disconnect your
TV from a cable system.
9
Converter Box
Chapter 3 : Operating Your TV
Operating Your TV
CHAPTER
3
10
Once you have connected your TV to an antenna or cable system, plugged the TV in,
and put batteries in the remote, you are ready to use the TV. The first thing you should
do is program your TV so it memorizes all of the available channels.
Turning Your TV On
1To turn your TV on, press the POWER button on the remote
control. You can also use the POWER button on the front panel.
Make sure your TV is plugged in before you try to turn it on.
Programming Your TV's Channel Memory
Your TV's memory determines the channels that are available using the CHV W
buttons. If a channel is not in memory, you can tune to it with the number buttons, but
not with the V W CH buttons. Follow these steps to program your TV's memory:
1With the TV on, press the MENU button.
2Use the V W C BCH buttons to select SETUP and press VOL .
3Use the V W C B CH buttons to select ANTENNA, then use the VOL buttons to
select AIR or CABLE. If you connected an antenna to your TV, select AIR; if you
connected a cable system, select CABLE.
4Use the V W C B CH buttons to select AUTO PROGRAM, then use the VOL but-
tons to begin the AUTO PROGRAM process. This process takes a few minutes.
5Press the MENU button to return to normal TV viewing.
Your TV's channel memory will not be affected by a power outage. You will not need to
re-program the memory unless you change the type of cable antenna connected to your
TV.
2 3 41
1
Chapter 3 : Operating Your TV
11
Changing Channels
You can change channels in three ways:
1The V W CH buttons will take you through all memorized chan-
nels, one by one. The V W CH buttons will not access channels
that have not been programmed into the TV's memory. For more
information about programming channels into memory, see the
section “Programming your TV's Channel Memory,” above.
2The number buttons (0-9) will take you to any channel, even if it
has not been memorized. To change to a channel, enter its num-
ber; the TV will tune to the new channel when you enter the sec-
ond digit of the channel.
3The PREV. CH button will take you instantly to the last channel
you were watching.
Changing the Volume
1To change the volume of the TV set, use the VOL buttonsC B
on the remote or on the front panel.
2To quickly turn off the sound, press the MUTE button on the
remote. The volume bar will appear on screen, colored red. To
return the volume to its previous level, press MUTE again.
Changing the TV's Channel Memory
Your TV's memory determines the channels that are available using the CHV W
buttons. You can add channels to this memory or remove them from memory. If a
channel is removed from memory, you can tune to it with the number buttons, but you
cannot tune to it with the V W CH buttons.
Adding a channel to memory
1Use the number buttons to tune to the channel.
2Press the ADD/ERA button on the remote control. The channel
will turn from magenta to green to show it has been added.
1
2
1
2
3
1
2
12
Erasing a channel from memory
1Tune to the channel you want to erase.
2Press the ADD/ERA button on the remote control. The channel
will turn from green to magenta to show it has been erased.
Changing the TV's channel memory with the menus
You can also use the menu system to add or erase channels from memory:
1Use the number buttons to tune to the channel, then press MENU.
2Use the CH buttons to select SETUP and press VOL .V W C B
3Use the V W CH buttons to select EDIT PROGRAM. If the channel is in memory, it
will be labeled “ADD,” and the number in the corner will be green. If the channel is
not in memory, it will be labeled “ERASE,” and the number in the corner will be
magenta.
4Use the C B VOL buttons to change the ADD or ERASE setting.
5Wait 7 seconds, or press MENU twice to exit.
Chapter 3 : Operating Your TV
1
2
2 3 41
Changing the TV’s Input
Normally, your TV displays the signal coming through the antenna terminal. However,
if you’ve connected another component to your TV (such as a VCR) using the
Audio/Video Inputs, you will want to be able to view the signal from that component.
To do this, you will need to switch from the “TV” input to the “Video” input, as follows;
1With the TV turned on, Press MENU
2You will see the Main Menu, Use the V W CH buttons to select SETUP and press
C BVOL .
3Use the V W CH buttons to select INPUT.
4Press C B C B VOL to change from TV to VIDEO. Press VOL again to switch back
to TV.
5Wait 7 seconds to return to normal viewing, or press MENU twice.
Changing the TV’s Input with the remote control
1You can also change the TV/VIDEO setting with the remote
control. Press TV/VIDEO button on the remote control to
change from TV to VIDEO. Press TV/VIDEO button again to
switch back to TV.
Displaying the Current Channel
1To quickly see the current channel, press RECALL. The current
channel will be displayed briefly.
Chapter 3 : Operating Your TV
13
1
2 3 41
1
Chapter 3 : Operating Your TV
Adjusting Video Settings
You may wish to adjust the video settings (e. g. contrast or color) to obtain the most
pleasing picture. To do so, follow these directions:
1With the TV on, press the MENU button.
2Use the V W CH buttons to select PICTURE.
3Press the C B VOL buttons. The picture menu will appear.
4The AUTO feature will be selected. Use the C B VOL button to turn AUTO to OFF.
This will allow you to manually adjust the video settings.
5Use the V W CH buttons to select the video setting you wish to adjust. Descriptions
of the video settings are on the next page.
6Use the C B VOL buttons to adjust the video setting to the level you prefer.
7Use the V W CH buttons to select another video setting to adjust.
8When you are finished, press the MENU button twice to return to normal viewing.
14
6 75 8
2 31 4
Produkt Specifikationer
| Mærke: | Daewoo |
| Kategori: | televisión |
| Model: | DTQ27S2FCV |
Har du brug for hjælp?
Hvis du har brug for hjælp til Daewoo DTQ27S2FCV stil et spørgsmål nedenfor, og andre brugere vil svare dig
televisión Daewoo Manualer
15 Januar 2025
15 Januar 2025
15 Januar 2025
22 September 2024
3 September 2024
31 August 2024
26 August 2024
20 August 2024
16 August 2024
15 August 2024
televisión Manualer
- televisión DirecTV
- televisión Majestic
- televisión VOX
- televisión Kivi
- televisión Palsonic
- televisión H&B
- televisión LG
- televisión Sanyo
- televisión ITT
- televisión Axing
- televisión AudioAffairs
- televisión Reflexion
- televisión Luxor
- televisión Insignia
- televisión Kogan
Nyeste televisión Manualer
20 Februar 2025
19 Februar 2025
19 Februar 2025
10 Februar 2025
5 Februar 2025
30 Januar 2025
30 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025