Dahua Technology DHI-LM22-B200S Manual

Dahua Technology overvåge DHI-LM22-B200S

Læs gratis den danske manual til Dahua Technology DHI-LM22-B200S (14 sider) i kategorien overvåge. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Dahua Technology DHI-LM22-B200S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/14

LED Monitor

User’s Manual

V1.0.0

Foreword

General

This manual introduces the installation, functions and operations of the LED monitor (hereinafter

referred to as "the monitor"). Read carefully before using the monitor, and keep the manual safe for

future reference.

Safety Instructions

The following signal words might appear in the manual.

Signal Words Meaning

DANGER

Indicates a high potential hazard which, if not avoided, will result in

death or serious injury.

WARNING

Indicates a medium or low potential hazard which, if not avoided,

could result in slight or moderate injury.

CAUTION

Indicates a potential risk which, if not avoided, could result in

property damage, data loss, reductions in performance, or

unpredictable results.

TIPS Provides methods to help you solve a problem or save time.

NOTE Provides additional information as a supplement to the text.

Revision History

Version Revision Content R elease Time

V1.0.0 rFirst elease. August 2022

Privacy Protection Notice

As the device user or data controller, you might collect the personal data of others such as their face,

fingerprints, and license plate number. You need to be in compliance with your local privacy protection

laws and regulations to protect the legitimate rights and interests of other people by implementing

measures which include but are not limited: Providing clear and visible identification to inform people

of the existence of the surveillance area and provide required contact information.

About the Manual

 The manual is for reference only. Slight differences might be found between the manual and the

product.

 We are not liable for losses incurred due to operating the product in ways that are not in

compliance with the manual.

 The manual will be updated according to the latest laws and regulations of related jurisdictions.

For detailed information, see the paper user’s m -anual, use our CD ROM, scan the QR code or visit

our official website. The manual is for reference only. Slight differences might be found between

the electronic version and the paper version.

 All designs and software are subject to change without prior written notice. Product updates

might result in some differences appearing between the actual product and the manual. Please

contact customer service for the latest program and supplementary documentation.

 There might be errors in the print or deviations in the description of the functions, operations and

technical data. If there is any doubt or dispute, we reserve the right of final explanation.

 Upgrade the reader software or try other mainstream reader software if the manual (in PDF

format) cannot be opened.

 All trademarks, registered trademarks and company names in the manual are properties of their

respective owners.

 Please visit our website, contact the supplier or customer service if any problems occur while

using the device.

 If there is any uncertainty or controversy, we reserve the right of final explanation.

III

Important Safeguards and Warnings

This section introduces content covering the proper handling of the monitor, hazard prevention, and

prevention of property damage. Read carefully before using the monitor, and comply with the

guidelines when using it.

Operation Requirements

 Notice and observe all the warnings and illustrations.

 Do not place any items on the product. The product may be damaged if foreign objects enter the

internal unit.

 Do not tread on or squeeze the power line, especially the plug or connection point of the power

line to the product.

 Do not touch any fixed components inside the product. Failure to do so can result in damage to

the product or person.

 The monitor may experience image distortion or color decay when the temperature variation is

too large. Wait for a moment (with power on) and the distortion should disappear.

 Do not press, stretch or heat the connecting lines, which might cause damage to it.

 Please firmly grasp the plug of the connecting line when inserting and removing. Pulling the

connecting line might cause damage to it.

 Do not hang or lean on the product. Doing so can cause the product to fall or become damaged.

It may also cause injury to people. Pay special attention when children are nearby.

 Please turn off power for safety if not using the product for a long time.

 Do not let the connecting line get squeezed, buckled, pulled or twisted.

 Make sure the power is turned off and the connecting lines are removed when moving the

product.

 Avoid collisions with the product. This may cause equipment failure.

Installation Requirements

WARNING

 Do not put the product in flammable or corrosive gaseous environment, which may cause fire or

damage the product. Placing the product in proximity to flammable gas can easily result in a

dangerous explosion.

 Do not expose the product to rain or chemicals. If the product is moist, allow to fully dry before

plugging in or turning on power.

 Failure to properly secure all screws during installation can result in a fall of the product. Ensure

all mounting hardware and other installation accessories are properly secured during installation.

Table of Contents

Foreword ............................................................................................................................................................ I

Important Safeguards and Warnings ............................................................................................................. III

1 Introduction ................................................................................................................................................... 1

Appearance .................................................................................................................................................................................. 1

Features ......................................................................................................................................................................................... 1

2 Ports 2...............................................................................................................................................................

3 Menu Operations........................................................................................................................................... 3

PC Menu (PC Source) ................................................................................................................................................................ 3

Picture Menu (HDMI Source) ................................................................................................................................................. 4

Audio Menu.................................................................................................................................................................................. 4

OSD Menu..................................................................................................................................................................................... 5

Function Menu ............................................................................................................................................................................ 5

Geometry Menu (PC Source) ................................................................................................................................................. 6

Channel Selection...................................................................................................................................................................... 6

4 FAQ ................................................................................................................................................................. 7

How to Clean Product .............................................................................................................................................................. 7

Troubleshooting ......................................................................................................................................................................... 7