Daikin ARX25K2V1B Manual

Daikin Ikke kategoriseret ARX25K2V1B

Læs nedenfor 📖 manual på dansk for Daikin ARX25K2V1B (124 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 10 personer og blev bedømt med 4.7 stjerner i gennemsnit af 5.5 brugere

Download PDF

Side 1/124

INSTALLATION

MANUAL

R410A Split Series

Installation manual

R410A Split series E shngli

Ins allati nsa leit o n tung Deutsch

Manuel d’installation Français

Montagehandleiding Nederla snd

Manual de instalación Español

Ma uale d’in nstallazione Italiano

Εγχειρίδιο εγκατάστασης Ελληνικά

Manual de Instalação Por uguet s

Руководство по монтажу Русский

Tanıtma ve Kullanma KılavuzuTürkçe

Models

ARX20K5V1B9

ARX25K5V1B9

ARX35K5V1B9

Split-Baureihe R410A

Série split R410A

R410A Split-serie

Serie Split R410A

Serie Multiambienti R410 A

Σειρά Split R410A

Série R410A Split

Серия R410A с ра дель ой устаз н новко

R410A Split serisi

Daikin Europe N.V.

CE - DECLARATION-OF-CONFORMITY

CE - KONFORMITÄTSERKLÄRUNG

CE - DECLARATION-DE-CONFORMITE

CE - CONFORMITEITSVERKLARING

CE - DECLARACION-DE-CONFORMIDAD

CE - DICHIARAZIONE-DI-CONFORMITA

CE - ∆HΛΩΣΗ ΣΥΜΜΟΡΦΩΣΗΣ

CE - DECLARAÇÃO-DE-CONFORMIDADE

CE - ЗАЯВЛЕНИЕ- -О СООТВЕТСТВИИ

CE - OVERENSSTEMMELSESERKLÆRING

CE - FÖRSÄKRAN-OM-ÖVERENSTÄMMELSE

CE - ERKLÆRING OM-SAMSVAR

CE - ILMOITUS-YHDENMUKAISUUDESTA

CE - PROHLÁŠENÍ-O-SHODĚ

CE - IZJAVA-O-USKLAĐENOSTI

CE - MEGFELELŐSÉGI-NYILATKOZAT

CE - DEKLARACJA-ZGODNOŚCI

CE - DECLARAŢIE-DE-CONFORMITATE

CE - IZJAVA O SKLADNOSTI

CE - VASTAVUSDEKLARATSIOON

CE - ДЕКЛАРАЦИЯ-ЗА-ϹЪОТВЕТСТВИЕ

CE - ATITIKTIES-DEKLARACIJA

CE - ATBILSTĪ ĀBAS-DEKLAR CIJA

CE - VYHLÁSENIE-ZHODY

CE - UYGUNLUK-BEYANI

are in conformity with the following standard(s) or other normative document(s), provided that these are used in accordance with our

instructions:

der/den folgenden Norm(en) oder einem anderen Normdokument oder -dokumenten entspricht/entsprechen, unter der Voraussetzung,

daß sie gemäß unseren Anweisungen eingesetzt werden:

sont conformes à la/aux norme(s) ou autre(s) document(s) normatif(s), pour autant qu'ils soient utilisés conformément à nos instructions:

conform de volgende norm(en) of één of meer andere bindende documenten zijn, op voorwaarde dat ze worden gebruikt overeenkomstig

onze instructies:

están en conformidad con la(s) siguiente(s) norma(s) u otro(s) documento(s) normativo(s), siempre que sean utilizados de acuerdo con

nuestras instrucciones:

sono conformi al(i) seguente(i) standard(s) o altro(i) documento(i) a carattere normativo, a patto che vengano usati in conformità alle

nostre istruzioni:

είναι σύμφωνα με το(α) ακόλουθο(α α ή) πρότυπο( ) άλλο έγγραφο(α) κανονισμών, υπό την προϋπόθεση ότι χρησιμοποιούνται σύμφωνα

με τις οδηγίες μας:

estão em conformidade com a(s) seguinte(s) norma(s) ou outro(s) documento(s) normativo(s), desde que estes sejam utilizados de

acordo com as nossas instruções:

соответствуют следующим стандартам использования или другим нормативным документам, при условии их согласно нашим

инструкциям:

overholder følgende standard(er) eller andet/andre retningsgivende dokument(er), forudsat at disse anvendes i henhold til vore

instrukser:

respektive utrustning är utförd i överensstämmelse med och följer följande standard(er) eller andra normgivande dokument, under

förutsättning att användning sker i överensstämmelse med våra instruktioner:

respektive utstyr er i overensstemmelse med følgende standard(er) eller andre normgivende dokument(er), under forutssetning av at

disse brukes i henhold til våre instrukser:

vastaavat seuraavien standardien ja muiden ohjeellisten dokumenttien vaatimuksia edellyttäen, että niitä käytetään ohjeidemme

mukaisesti:

za předpokladu, že jsou využívány v souladu s našimi pokyny, odpovídají následujícím normám nebo normativním dokumentům:

u skladu sa slijedećim standardom(ima) ili drugim normativnim dokumentom(ima), uz uvjet da se oni koriste u skladu s našim uputama:

megfelelnek az alábbi szabvány(ok)nak vagy egyéb irányadó dokumentum(ok)nak, p3-ha azokat előírás szerint használják:

spełniają wymogi następujących norm i innych dokumentów normalizacyjnych, pod warunkiem że używane są zgodnie z naszymi

instrukcjami:

sunt în conformitate cu următorul (următoarele) standard(e) sau alt(e) document(e) normativ(e), cu condiţia ca acestea să fie utilizate în

conformitate cu instrucţiunile noastre:

skladni z naslednjimi standardi in drugimi normativi, pod pogojem, da se uporabljajo v skladu z našimi navodili:

on vastavuses järgmis(t)e standardi(te)ga või teiste normatiivsete dokumentidega, kui neid kasutatakse vastavalt meie juhenditele:

съответстват на следните стандарти или други нормативни документи , при условие, че се използват съгласно нашите

инструкции:

atitinka žemiau nurodytus standartus ir (arba) kitus norminius dokumentus su sąlyga, kad yra naudojami pagal mū ųs nurodymus:

tad, ja lietoti atbilstoši ražotāja norā īd jumiem, atbilst sekojošiem standartiem un citiem normatīviem dokumentiem:

sú v zhode s nasledovnou(ými) normou(ami) alebo iným(i) normatívnym(i) dokumentom(ami), za predpokladu, že sa používajú v súlade

s našim návodom:

ürünün, talimatları ım za göre kullanılması koşuluyla aş ğaıdaki standartlar ve norm belirten belgelerle uyumludur:

Directives, as amended.

Direktiven, gemäß Änderung.

Directives, telles que modifiées.

Richtlijnen, zoals geamendeerd.

Directivas, según lo enmendado.

Direttive, come da modifica.

Οδηγιών, όπως έχουν τροποποιηθεί.

Directivas, conforme alteração em.

Директив со всеми поправками.

Direktiver, med senere ændringer.

Direktiv, med företagna ändringar.

Direktiver, med foretatte endringer.

Direktiivejä, sellaisina kuin ne ovat muutettuina.

v platném znění.

Smjernice, kako je izmijenjeno.

irányelv(ek) és módosításaik rendelkezéseit

z późniejszymi poprawkami.

Directivelor, cu amendamentele respective.

Direktive z vsemi spremembami.

Direktiivid koos muudatustega.

Директиви, с техните изменения.

Direktyvose su papildymais.

Direktī āv s un to papildinājumos.

Smernice, v platnom znení.

Deǧ şi tirilmiş halleriyle Yönetmelikler.

following the provisions of:

gemäß den Vorschriften der:

conformément aux stipulations des:

overeenkomstig de bepalingen van:

siguiendo las disposiciones de:

secondo le prescrizioni per:

με τήρηση των διατάξεων των:

de acordo com o previsto em:

в соответствии с положениями:

under iagttagelse af bestemmelserne i:

enligt villkoren i:

gitt i henhold til bestemmelsene i:

noudattaen määräyksiä:

za dodržení ustanovení předpisu:

prema odredbama:

követi a(z):

zgodnie z postanowieniami Dyrektyw:

în urma prevederilor:

ob upoštevanju določb:

vastavalt nõuetele:

следвайки клаузите на:

laikantis nuostatų, pateikiamų:

ievērojot prasības, kas noteiktas:

održiavajúc ustanovenia:

bunun koşullarına uygun olarak:

01 Note *

as set out in

<A>

and judged positively by

according to the

Certificate <C>

02 Hinweis *

wie in

<A>

aufgeführt und von

positiv beurteilt

gemäß

Zertifikat <C>

03 Remarque *

tel que défini dans

<A>

et évalué positivement par

conformément au

Certificat <C>

04 Bemerk *

zoals vermeld in

<A>

en positief beoordeeld door

overeenkomstig

Certificaat <C>

05 Nota *

como se establece en

<A>

y es valorado

positivamente por

de acuerdo con el

Certificado <C>

06 Nota *

delineato nel

<A>

e giudicato positivamente

secondo il

Certificato <C>

07 Σημείωση *

όπως καθορίζεται στο

<A>

και κρίνεται θετικά από

το

σύμφωνα με το

Πιστοποιητικό <C>

08 Nota *

tal como estabelecido em

<A>

e com o parecer

positivo de

de acordo com o

Certificado <C>

09 Примечание *

как указано в

<A>

и в соответствии

с положительным решением

согласно

Свидетельству <C>

10 Bemærk *

som anført i

<A>

og positivt vurderet af

i henhold til

Certifikat <C>

11 Information *

enligt

<A>

och godkänts av

enligt

Certifikatet <C>

12 Merk *

som det fremkommer i

<A>

og gjennom positiv

bedømmelse av

ifølge

Sertifikat <C>

13 Huom *

jotka on esitetty asiakirjassa

<A>

ja jotka

hyväksynyt

Sertifikaatin <C>

mukaisesti.

14 Poznámka *

jak bylo uvedeno v

<A>

a pozitivně zjištěno

v souladu s

osvě čd ením <C>

15 Napomena *

kako je izloženo u

<A>

i pozitivno ocijenjeno

od strane

prema

Certifikatu <C>

16 Megjegyzés *

a(z)

<A>

alapján, a(z)

igazolta a megfelelést,

a(z)

<C> tanúsítvány

szerint.

17 Uwaga *

zgodnie z dokumentacją

<A>

, pozytywną opinią

Świadectwem <C>

18 Notă *

aşa cum este stabilit în

<A>

şi apreciat pozitiv

în conformitate cu

Certificatul <C>

19 Opomba *

kot je določeno v

<A>

in odobreno s strani

v skladu s

certifikatom <C>

20 Märkus *

nagu on näidatud dokumendis

<A>

ja heaks

kiidetud

järgi vastavalt

sertifikaadile <C>

21 Забележка

* както е изложено в

<A>

и оценено положително

от

съгласно

Сертификата <C>

22 Pastaba *

kaip nustatyta

<A>

ir kaip teigiamai nuspręsta

pagal

Sertifikatą<C>

23 Piezīmes *

k dā norā īts

<A>

un atbilstoši

pozitīvajam

vērtējumam saskaņā ar

sertifikātu <C>

24 Poznámka *

ako bolo uvedené v

<A>

a pozitívne zistené

v súlade s

osvedčením <C>

25 Not * <A>

’da belirtildiği gibi ve

<C> Sertifikasına

göre

tarafından olumlu olarak değ ğerlendirildi i gibi.

<A> DAIKIN.TCF.015R28/09-2016

DEKRA (NB0344)

<C> 74736-KRQ/EMC97-4957

declares under its sole responsibility that the air conditioning models to which this declaration relates:

erklärt auf seine alleinige Verantwortung daß die Modelle der Klimageräte für die diese Erklärung bestimmt ist:

déclare sous sa seule responsabilité que les appareils d'air conditionné visés par la présente déclaration:

verklaart hierbij op eigen exclusieve verantwoordelijkheid dat de airconditioning units waarop deze verklaring betrekking heeft:

declara baja su única responsabilidad que los modelos de aire acondicionado a los cuales hace referencia la declaración:

dichiara sotto sua responsabilità che i condizionatori modello a cui è riferita questa dichiarazione:

δηλώνει με αποκλειστική της ευθύνη ότι τα μοντέλα των κλιματιστικών συσκευών στα οποία αναφέρεται η παρούσα δήλωση:

declara sob sua exclusiva responsabilidade que os modelos de ar condicionado a que esta declaração se refere:

заявляет, исключительно под свою ответственность, что модели кондиционеров воздуха, к которым :относится настоящее заявление

erklærer under eneansvar, at klimaanlægmodellerne, som denne deklaration vedrører:

deklarerar i egenskap av huvudansvarig, att luftkonditioneringsmodellerna som berörs av denna deklaration innebär att:

erklærer et fullstendig ansvar for at de luftkondisjoneringsmodeller som berøres av denne deklarasjon, innebærer at:

ilmoittaa yksinomaan omalla vastuullaan, että tämän ilmoituksen tarkoittamat ilmastointilaitteiden mallit:

prohlašuje ve své plné odpov dnosti, že modely klimatizace, k nimž se toto prohlášení vztahuje:ě

izjavljuje pod isključivo vlastitom odgovornošću da su modeli klima uređaja na koje se ova izjava odnosi:

teljes felelőssége tudatában kijelenti, hogy a klímaberendezés modellek, melyekre e nyilatkozat vonatkozik:

deklaruje na wł ąasn i wyłączną odpowiedzialność, że modele klimatyzatorów, których dotyczy niniejsza deklaracja:

declară pe proprie răspundere că aparatele de aer condiţionat la care se referă această declaraţie:

z vso odgovornostjo izjavlja, da so modeli klimatskih naprav, na katere se izjava nanaša:

kinnitab oma täielikul vastutusel, et käesoleva deklaratsiooni alla kuuluvad kliimaseadmete mudelid:

декларира на своя отговорност, че моделите климатична инсталация, за които се отнася тази декларация:

visiška savo atsakomybe skelbia, kad oro kondicionavimo prietaisų modeliai, kuriems yra taikoma ši deklaracija:

ar pilnu atbildību apliecina, ka t u gaisa kondicionā āl k uzskaitīto modeļ ē āt ji, uz kuriem attiecas šī deklarācija:

vyhlasuje na vlastnú zodpovednosť, že tieto klimatizačné modely, na ktoré sa vzťahuje toto vyhlásenie:

tamamen kendi sorumluluǧunda olmak üzere bu bildirinin ilgili olduǧu klima modellerinin aş ǧaıdaki gibi olduǧunu beyan eder:

EN60335-2-40,

3P407534-4

Shigeki Morita

Director

Ostend, t of 01 1s Oct 2 6

01 **

Daikin Europe N.V. is authorised to compile the Technical Construction File.

02 **

Daikin Europe N.V. hat die Berechtigung die Technische Konstruktionsakte zusammenzustellen.

03 **

Daikin Europe N.V. est autorisé à compiler le Dossier de Construction Technique.

04 **

Daikin Europe N.V. is bevoegd om het Technisch Constructiedossier samen te stellen.

05 **

Daikin Europe N.V. está autorizado a compilar el Archivo de Construcción Técnica.

06 **

Daikin Europe N.V. è autorizzata a redigere il File Tecnico di Costruzione.

07 **

Η Daikin Europe N.V. είναι εξουσιοδοτημένη να συντάξει τον Τεχνικό φάκελο κατασκευής.

08 **

A Daikin Europe N.V. está autorizada a compilar a documentação técnica de fabrico.

09 **

Компания Daikin Europe N.V. уполномочена составить Комплект технической документации.

10 **

Daikin Europe N.V. er autoriseret til at udarbejde de tekniske konstruktionsdata.

11 **

Daikin Europe N.V. är bemyndigade att sammanställa den tekniska konstruktionsfilen.

12 **

Daikin Europe N.V. har tillatelse til å kompilere den Tekniske konstruksjonsfilen.

13 **

Daikin Europe N.V. on valtuutettu laatimaan Teknisen asiakirjan.

14 **

Společnost Daikin Europe N.V. má oprávnění ke kompilaci souboru technické konstrukce.

15 **

Daikin Europe N.V. je ovlašten za izradu Datoteke o tehničkoj konstrukciji.

16 **

A Daikin Europe N.V. jogosult a műszaki konstrukciós dokumentáció összeállítására.

17 **

Daikin Europe N.V. p3-ma upoważnienie do zbierania i opracowywania dokumentacji konstrukcyjnej.

18 **

Daikin Europe N.V. este autorizat să compileze Dosarul tehnic de construcţie.

19 **

Daikin Europe N.V. je pooblaščen za sestavo datoteke s tehnično mapo.

20 **

Daikin Europe N.V. on volitatud koostama tehnilist dokumentatsiooni.

21 **

Daikin Europe N.V. е оторизирана да състави Акта за техническа конструкция.

22 **

Daikin Europe N.V. yra įgaliota sudaryti šį techninės konstrukcijos failą.

23 **

Daikin Europe N.V. ir autorizēts sastā īd t tehnisko dokumentāciju.

24 **

Spolo nosč ť Daikin Europe N.V. je oprávnená vytvoriť súbor technickej konštrukcie.

25 **

Daikin Europe N.V. Teknik Yapı Dosyası ın derlemeye yetkilidir.

Low Voltage / /E 2014 35 U

Machinery 06/42/EC 20

Electromagnetic Compatibility 20 4/ /E1 30 U

ARX20K5V1B9, ARX25K5V1B9, ARX35K5V1B9

English 1

Safety Precautions

• Read these Safety Precautions carefully to ensure correct installation.

• This manual classifies the precautions into WARNING and CAUTION.

Be sure to follow all the precautions below: they are all important for ensuring safety.

WARNING.........Failure to follow any of WARNING is likely to result in such grave consequences as death or serious injury.

CAUTION .........Failure to follow any of CAUTION may result in grave consequences in some cases.

• The following safety symbols are used throughout this manual:

• After completing installation, test the unit to check for installation errors. Give the user adequate instructions

concerning the use and cleaning of the unit according to the Operation Manual.

• The English text is the original instruction. Other languages are translations of the original instructions.

Be sure to observe this instruction. Be sure to establish an earth connection. Never attempt.

WARNING

• Installation should be left to the dealer or another professional.

Improper installation may cause water leakage, electrical shock, or fire.

• Install the air conditioner according to the instructions given in this manual.

Incomplete installation may cause water leakage, electrical shock, or fire.

• Be sure to use the supplied or specified installation parts.

Use of other parts may cause the unit to come to lose, water leakage, electrical shock, or fire.

• Install the air conditioner on a solid base that can support the weight of the unit.

An inadequate base or incomplete installation may cause injury in the event the unit falls off the base.

• Electrical work should be carried out in accordance with the installation manual and the national electrical wiring

rules or code of practice.

Insufficient capacity or incomplete electrical work may cause electrical shock or fire.

• Be sure to use a dedicated power circuit. Never use a power supply shared by another appliance.

• For wiring, use a cable length enough to cover the entire distance with no connection.

Do not use an extension cord. Do not put other loads on the power supply, use a dedicated power circuit.

(Failure to do so may cause abnormal heat, electric shock or fire.)

• Use the specified types of wires for electrical connections between the indoor and outdoor units.

Firmly clamp the interconnecting wires so their terminals receive no external stresses. Incomplete connections or clamping may cause terminal

overheating or fire.

• After connecting interconnecting and supply wiring be sure to shape the cables so that they do not put undue force

on the electrical covers or panels.

Install covers over the wires. Incomplete cover installation may cause terminal overheating, electrical shock, or fire.

• If any refrigerant has leaked out during the installation work, ventilate the room.

(The refrigerant produces a toxic gas if exposed to flames.)

• After all installation is complete, check to make sure that no refrigerant is leaking out.

(The refrigerant produces a toxic gas if exposed to flames.)

• When installing or relocating the system, be sure to keep the refrigerant circuit free from substances other than the

specified refrigerant (R410A), such as air.

(Any presence of air or other foreign substance in the refrigerant circuit causes an abnormal pressure rise or rupture, resulting in injury.)

• During pump-down, stop the compressor before removing the refrigerant piping.

If the compressor is still running and the stop valve is open during pump-down, air will be sucked in when the refrigerant piping is removed,

causing abnormal pressure in the freezer cycle which will lead to breakage and even injury.

• During installation, attach the refrigerant piping securely before running the compressor.

If the compressor is not attached and the stop valve is open during pump-down, air will be sucked in when the compressor is run, causing

abnormal pressure in the freezer cycle which will lead to breakage and even injury.

• Be sure to establish an earth. Do not earth the unit to a utility pipe, arrester, or telephone earth.

Incomplete earth may cause electrical shock, or fire. A high surge current from lightning or other sources may cause damage to the

air conditioner.

• Be sure to install an earth leakage breaker.

Failure to install an earth leakage breaker may result in electric shocks, or fire.

CAUTION

• Do not install the air conditioner in a place where there is danger of exposure to inflammable gas leakage.

If the gas leaks and builds up around the unit, it may catch fire.

• Establish drain piping according to the instructions of this manual.

Inadequate piping may cause flooding.

• Tighten the flare nut according to the specified method such as with a torque wrench.

If the flare nut is tightened too hard, the flare nut may crack after a long time and cause refrigerant leakage.

2English

Accessories

Accessories supplied with the outdoor unit:

Precautions for Selecting the Location

1) Choose a place solid enough to bear the weight and vibration of the unit, where the operation noise will not be amplified.

2) Choose a location where the hot air discharged from the unit or the operation noise will not cause a nuisance to the neighbors of

the user.

3) Avoid places near a bedroom and the like, so that the operation noise will cause no trouble.

4) There must be sufficient spaces for carrying the unit into and out of the site.

5) There must be sufficient space for air passage and no obstructions around the air inlet and the air outlet.

6) The site must be free from the possibility of flammable gas leakage in a nearby place.

7) Install units, power cords and inter-unit cables at least 3 meter away from television and radio sets. This is to prevent interference

to images and sounds. (Noises may be heard even if they are more than 3 meter away depending on radio wave conditions.)

8) In coastal areas or other places with salty atmosphere of sulfate gas, corrosion may shorten the life of the air conditioner.

9) Since drain flows out of the outdoor unit, do not place under the unit anything which must be kept away from moisture.

NOTE

Cannot be installed hanging from ceiling or stacked.

CAUTION

When operating the air conditioner in a low outdoor ambient

temperature, be sure to follow the instructions described below.

1) To prevent exposure to wind, install the outdoor unit with its suction

side facing the wall.

2) Never install the outdoor unit at a site where the suction side may

be exposed directly to wind.

3) To prevent exposure to wind, it is recommended to install a baffle

plate on the air discharge side of the outdoor unit.

4) In heavy snowfall areas, select an installation site where the snow will not affect the unit.

•

Make sure to provide for adequate measures in order to prevent that the outdoor unit be used as a shelter by small animals.

Small animals making contact with electrical parts can cause malfunctions, smoke or fire. Please instruct the customer to keep the area around the unit clean.

• This appliance is intended to be used by expert or trained users in shops, in light industry and on farms, or for

commercial and household use by lay persons.

• Sound pressure level is less than 70 dB(A).

(A) Installation Manual

(B) Drain plug (Heat pump-Models)

It is on the bottom of the packing case.

(D) Multilingual fluorinated greenhouse gases label

Construct a large canopy.

Construct a pedestal.

Install the unit high enough off the

ground to prevent burying in snow.

250mm from wall

English 3

Outdoo nir U t Installation Drawings

O.D. 9.5mm

Gas pipe

Liquid pipe

O.D. 6.4mm

20g/m

Max. allowable length

12m

15m

Max. allowable height

Additional refrigerant

required for refrigerant

pipe exceeding

10m in length.

Be sure to add the proper amount of additional refrigerant.

Failure to do so may result in reduced perfomance.

The suggested shortest pipe length is 1.5m, in order to avoid

noise from the outdoor unit and vibration.

(Mechanical noise and vibration may occur depending on how

the unit is installed and the environment in which it is used.)

1.5m

Min. allowable length

470

Foot bolt-hole

centres

300

CAUTION

Set the piping length from

1.5m to 15m.

Wrap the insulation pipe with

the finishing tape from bottom

to top.

In sites with poor drainage, use

block bases for outdoor unit.

Adjust foot height until the unit

is leveled. Otherwise, water

leakage or pooling of water may

occur.

Where there is a danger of the unit

falling, use foot bolts, or wires.

Allow space for piping

and electrical servicing.

unit: mm

(Foot bolt-hole centres)

(From unit’s side)

How to remove the stop

valve cover.

Remove the screw on the

stop valve cover.

Slide the lid downward

to remove it.

How to attach the stop

valve cover.

Insert the upper part of

the stop valve cover into the

outdoor unit to install.

Tighten the screws.

Stop valve cover

4English

Installation Guidelines

• Where a wall or other obstacle is in the path of outdoor unit’s intake or exhaust airflow, follow the installation guidelines below.

• For any of the below installation patterns, the wall height on the exhaust side should be 1200mm or less.

Precautions on Installation

• Check the strength and level of the installation ground so that the unit will not cause any operating vibration or noise after installed.

• In accordance with the foundation drawing, fix the unit securely by means of the foundation bolts. (Prepare four sets of M8 or M10

foundation bolts, nuts and washers each which are available on the market.)

• It is best to screw in the foundation bolts until their length are 20mm from the foundation surface.

Outdoor Unit Installation

1. Installing outdoor unit.

1) When installing the outdoor unit, refer to “Precautions for Selecting the Location” and the “Outdoor Unit Installation

Drawings.”

2) If drain work is necessary, follow the procedures below.

2. Drain work. (Heat pump-models.)

1) Use drain plug for drainage.

2) If the drain port is covered by a mounting base or floor surface, place

additional foot bases of at least 30mm in height under the outdoor unit’s feet.

3) In cold areas, do not use a drain hose with the outdoor unit.

(Otherwise, drain water may freeze, impairing heating performance.)

More than 50 More than 100

Side view

1200

or less

More than 50 More than 50

Top view

than 100

Top view

Unit: mm

More than 150

More than 300

More than 50

Wall facing one side Walls facing two sides

Walls facing three sides

More than 150

Drain-water hole

Bottom frame

Drain plug

Hose (available commercially,

inner dia. 16mm)

English 5

Outdoor Unit Installation

3. Flaring the pipe end.

1) Cut the pipe end with a pipe cutter.

2) Remove burrs with the cut surface facing

downward so that the chips do not enter the pipe.

3) Put the flare nut on the pipe.

4) Flare the pipe.

5) Check that the flaring is properly made.

WARNING

1) Do not use mineral oil on flared part.

2) Prevent mineral oil from getting into the system as this would reduce the lifetime of the units.

3) Never use piping which has been used for previous installations. Only use parts which are delivered with the unit.

4) Do never install a drier to this R410A unit in order to guarantee its lifetime.

5) The drying material may dissolve and damage the system.

6) Incomplete flaring may cause refrigerant gas leakage.

4. Refrigerant piping.

CAUTION

1) Use the flare nut fixed to the main unit. (To prevent cracking of the flare nut by aged deterioration.)

2) To prevent gas leakage, apply refrigeration oil only to the i refrigeration oil for R410A.)nner surface of the flare. (Use

3) Use torque wrenches when tightening the flare nuts to prevent damage to the flare nuts and gas leakage.

Align the centres of both flares and tighten the flare nuts 3 or 4 turns by hand. Then tighten them fully with the torque wrenches.

(Cut exactly at

right angles.) Remove burrs

Set exactly at the position shown below.

Flaring

Die

Check

Flare’s inner

surface must

be flaw-free.

The pipe end must

be evenly flared in

a perfect circle.

Make sure that the

flare nut is fitted.

A 0-0.5mm

Clutch-type

Flare tool for R410A

1.0-1.5mm

Clutch-type (Rigid-type)

1.5-2.0mm

Wing-nut type (Imperial-type)

Conventional flare tool

Torque wrench

Piping union

Flare nut

Flare nut tightening torque

Gas side Liquid side

3/8 inch 1/4 inch

32.7-39.9N • m 14.2-17.2N • m

(333-407kgf • cm) (144-175kgf • cm)

Valve cap tightening torque

Gas side Liquid side

3/8 inch 1/4 inch

21.6-27.4N • m 21.6-27.4N • m

(220-280kgf • cm) (220-280kgf • cm)

Service port cap 10.8~14.7N • m

tightening torque (110~150kgf • cm)

Do not apply refrigeration

oil to the outer surface.

Flare nut

Apply refrigeration oil to

the inner surface of the

flare.

Do not apply refrigeration

oil to the flare nut avoid

tightening with over torque.

Spanner

[Apply oil] [Tighten]

6English

Outdoor Unit Installation

5. Purging air and checking gas leakage.

• When piping work is completed, it is necessary to purge the air and check for gas leakage.

WARNING

1) Do not mix any substance other than the specified refrigerant (R410A) into the refrigeration cycle.

2) When refrigerant gas leaks occur, ventilate the room as soon and as much as possible.

3) R410A, as well as other refrigerants, should always be recovered and never be released directly into the environment.

4) Use a vacuum pump for R410A exclusively. Using the same vacuum pump for different refrigerants may damage the vacuum

pump or the unit.

• If using additional refrigerant, perform air purging from the refrigerant pipes and

indoor unit using a vacuum pump, then charge additional refrigerant.

• Use a hexagonal wrench (4mm) to operate the stop valve rod.

• All refrigerant pipe joints should be tightened with a torque wrench at the specified

tightening torque.

*1. Pipe length vs. vacuum pump run time.

*2. If the compound pressure gauge pointer swings back, refrigerant may have water content or a loose pipe joint may exists. Check

all pipe joints and retighten nuts as needed, then repeat steps 2) through 4).

1) Connect projection side of charging hose (which comes from gauge manifold) to gas stop valve’s service port.

2) Fully open gauge manifold’s low-pressure valve (Lo) and completely close its high-pressure valve (Hi).

(High-pressure valve subsequently requires no operation.)

3) Do vacuum pumping and make sure that the compound pressure gauge reads –0.1MPa (–76cmHg)*1.

4) Close gauge manifold’s low-pressure valve (Lo) and stop vacuum pump.

(Keep this state for a few minutes to make sure that the compound pressure gauge pointer does not swing back.)*2.

5) Remove caps from liquid stop valve and gas stop valve.

6) Turn the liquid stop valve’s rod 90 degrees counterclockwise with a hexagonal wrench to open valve.

Close it after 5 seconds, and check for gas leakage.

Using soapy water, check for gas leakage from indoor unit’s flare and outdoor unit’s flare and valve rods.

After the check is complete, wipe all soapy water off.

7) Disconnect charging hose from gas stop valve’s service port, then fully open liquid and gas stop valves.

(Do not attempt to turn valve rod beyond its stop.)

8) Tighten valve caps and service port caps for the liquid and ch at the specified torques.gas stop valves with a torque wren

Pipe length Up to 15 metres

Run time Not less than 10 min.

Compound

pressure gauge

Pressure

meter

High-

pressure

valve

Low-pressure

valve

Vacuum pump

Service port

Liquid

stop

valve

Valve caps

Gas stop valve

Charging

hoses

Gauge

manifold

Produkt Specifikationer

Mærke:	Daikin
Kategori:	Ikke kategoriseret
Model:	ARX25K2V1B

Har du brug for hjælp?

Hvis du har brug for hjælp til Daikin ARX25K2V1B stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Daikin Manualer

Daikin EAVX16S18DA9WG Manual

10 April 2025

Daikin RXYLQ40T7Y1B Manual

10 April 2025

Daikin RXYLQ42T7Y1B Manual

10 April 2025

Daikin ETVZ16S23EA6V7 Manual

10 April 2025

Daikin FXMA200AXVMB Manual

10 April 2025

Daikin FXZQ15A2VEB Manual

10 April 2025

Daikin ETVZ16S18EA9W Manual

9 April 2025

Daikin DSR1 Manual

9 April 2025

Daikin EKWCTRDI1V3 Manual

8 April 2025

Daikin FTXJ35A2V1BB9 Manual

18 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Waterpik WP-490 Manual

10 April 2025

Simplified MFG SP18CAT120 Manual

9 April 2025

Hario WDW-20 Manual

9 April 2025

IFM DW3003 Manual

9 April 2025

Fuxtec FX-CT350 Manual

9 April 2025

Fuxtec FX-CT-500 Manual

9 April 2025

Fuxtec FX-CT500 Manual

9 April 2025

Creality3D Ender-3 S1 Pro Manual

9 April 2025

Act AC6020 Manual

9 April 2025

Act AC6015 Manual

9 April 2025