Daikin BRE49B2F Manual

Daikin Klimaanlæg BRE49B2F

Læs gratis den danske manual til Daikin BRE49B2F (1 sider) i kategorien Klimaanlæg. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Daikin BRE49B2F, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

1P383776-1B

●Perform the following steps to confirm that the sensor kit is correctly connected.

1. After turning on the power, confirm that no infrared presence or infrared floor sensor errors (error codes: CE-01 through CE-04) are present upon pressing the

ON/OFF button on the remote controller.

2. Operate the remote controller to confirm that the functions only supported on models equipped with an infrared presence sensor listed in the“Main Menu List”or“Full Menu”in the remote

controller operation manual are indicated on the remote controller menu. (Example: “Auto airflow”, “Draft prevention”, etc.)

3. Confirm that the functions as confirmed in step 2 above operate correctly.

(Note) Swing control using the infrared presence sensor is not available when using the air conditioner for frontal air discharge only by means of flexible ducts or other accessories.