Datalogic QuickScan QS1000 Manual

Datalogic Stregkodelæser QuickScan QS1000

Læs gratis den danske manual til Datalogic QuickScan QS1000 (2 sider) i kategorien Stregkodelæser. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Datalogic QuickScan QS1000, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Laser CautionsNomenclature/Labeling

Figure 6

Class II

1. LASER RADIATION — DO NOT STARE INTO BEAM

CLASS 2 LASER PRODUCT

1. LASERSTRAHLUNG — NICHT IN DEN STRAHL BLICKEN

LASER KLASSE 2

1. VARO! LASERSÄTEILYA ÄLÄ TUIJOTA SÄTEESEEN

LUOKAN 2 LASERLAITE

1. RAYONNEMENT LASER — NE PAS REGARDER DANS LE

FAISCEAU APPAREIL A’ LASER DE CLASSE 2

1. LUZ LASER — ¡NO MIRE HACIA EL RAYO! CATEGORIA 2

PRODUCTO LASER

1. LUZ DE LASER

NAO OCHE NO RAIO CATEGORIA 2 PRODUTO LASER

1. RADIAZIONE LASER — NON FISSARE IL FASCIO

APPARECCHIO LASER DI CLASSE 2

1. VARNING — LASERSTRÅLNING

STIRRA IJ IN I STRÅLEN — KLASS 2 LASER APPARAT

1. ADVARSEL — LASERSTRÅLING IKKE STIRR INN I STRÅLEN

— LASER KLASSE 2 PRODUKT

1. ADVARSEL — LASERSTRÅLING — SE IKKE IND I STRÅLEN

— KLASS 2 LASER PRODUKT

QuickScan 1000

is certified in the U.S. to conform to the

requirements of DHHS/CDRH 21CFR Subchapter J for Class II

laser products.

QuickScan 1000

scanners are also certified as

Class 2 laser products to the requirements of IEC 825-1:1993.

Class 2 and Class II products are not considered to be hazardous.

The

QuickScan 1000

contains internally a Visible Laser Diode

(VLD) at a wavelength of 650-670 nanometers. The scanner is

designed so that there can be no human access to harmful levels

of laser light during normal operation, user maintenance, or during

prescribed service operations.

CAUTION

Do not attempt to open or otherwise service any components in

the optics cavity. Opening or servicing any part of the optics

cavity by unauthorized personnel may violate laser safety

regulations. The optics system is a factory only repair item.

Asia Pacific

PSC Hong Kong

Hong Kong

Telephone: [852]-2-584-6210

Fax: [852]-2-521-0291

Australia

PSC Asia Pacific Pty Ltd.

North Ryde, Australia

Telephone: [61] 0 (2) 9878 8999

Fax: [61] 0 (2) 9878 8688

France

PSC S.A.R.L.

LES ULIS Cedex, France

Telephone: [33].01.64.86.71.00

Fax: [33].01.64 46.72.44

Germany

PSC GmbH

Darmstadt, Germany

Telephone: 49 (0) 61 51/93 58-0

Fax: 49 (0) 61 51/93 58 58

User's Guide

Handheld Barcode Scanner

Italy

PSC S.p.A.

Vimercate (MI), Italy

Telephone: [39] (0) 39/62903.1

Fax: [39] (0) 39/6859496

Japan

PSC Japan K.K.

Shinagawa-ku, Tokyo, Japan

Telephone: 81 (0)3 3491 6761

Fax: 81 (0)3 3491 6656

Latin America

PSC S.A., INC.

Miami, Florida, USA

Telephone: (305) 539-0111

Fax: (305) 539-0206

United Kingdom

PSC Bar Code Ltd.

Watford, England

Telephone: 44 (0) 1923 809500

Fax: 44 (0) 1923 809 505

PSC Inc.

959 Terry Street

Eugene, OR

Telephone: (541) 683-5700

Fax: (541) 345-7140

www.pscnet.com

R44-2017 (Rev. D)

03/04

R44-2017

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

Power Supply

Unit requires either a Listed Class 2 or Listed LPS power source

which supplies power directly to the scanner.

FCC

This illustration shows label placement ONLY.

For actual regulatory, patent and other application

information, view the labels on the products itself,

or call your nearest sales or service office.

Scan Window LED

Cable

Release Hole

Installation

How to Scan

Reference Figure 3 and follow these tips to get the best scanning results:

1. The scanner must be pointed at a slight angle in relation to the

bar code (Not perpendicular to the bar code.)

2. The laser beam must cross the entire bar code. (The scanner

cannot correctly read a bar code if the entire bar code is not

scanned.)

Figure 3

Troubleshooting

If the scanner is not operating properly, the following checks should be

performed: Reference Figures 4 and 5.

1. Since the scanner can receive its power from the host computer

(Power Off the Terminal—P.O.T.) or an external power supply, it

will not operate without the system power on (Figure 4a) or if the

external power supply has failed.

2. Check that the bar code labels are of sufficient quality to be

recognized by the scanner (Figure 4b). Wrinkled, smudged, or

torn bar codes can cause the scanner to not read at all. If you

suspect that label quality is a problem, scan a known good bar

code to check the scanner's read operation. Is the scanner

programmed to read the bar code symbology desired? Consult the

QuickScan 1000™ Scanner Programming Guide (P/N R44-2018)

for more information (Figure 4c).*

3. Ensure that the scanner's interface type is compatible with the host

terminal by consulting your POS system manual and/or the

QuickScan 1000 Scanner Programming Guide (P/N R44-2018).

4. Verify that the interface (I/F) cable is securely attached to the

scanner handle (Figure 4d). If you need to disconnect/reconnect

the I/F cable from the scanner, insert the tip of a paper clip into the

cable release hole shown in Figure 5. Push the clip in to depress

the connector latch and release the cable. To reconnect the cable,

orient the cable with its connector inside the scanner handle and

press it in firmly to seat and latch securely in place.

5. Verify that the interface) cable is securely attached to the host

(Figure 4e). Consult your technical support manager or refer to

your host system manual to verify the proper connection for the

scanner.

6. If an external power supply is used, exchange the power supply

with a known good power supply (Figure 4g).

If the scanner receives power from the host (P.O.T.), connect the

scanner to a known good host.

If the scanner still does not function properly, contact your local supplier

or PSC Customer Support Services.

1-(800)-547-2507 (US only) or

(541) 683-5700 (outside US)

* This Programming Guide is available on the

internet at www.pscnet.com.

CE Declaration of Conformity

PSC hereby declares that the equipment specified below has been

tested and found compliant to the following Directives and

Standards:

Directives: EMC 89/336/EEC

Low Voltage 73/23/EEC

Standards: EN55022-B EN60825

EN50082-1 EN60950

Equipment Type:Bar code Scanning Equipment

Products: Model QuickScan 1000™

Brad West

Vice President

Quality and Process

Management

PSC, Inc.

959 Terry Street

Eugene, OR 97402

U.S.A.

Peter Lomax

Vice President

Europe, Middle East & Africa

PSC Bar Code Ltd.

Axis 3, Rhodes Way

Watford

Hertfordshire WD24 4TR

Figure 4

Figure 1

TROUBLESHOOTING - CONT.

Figure 5

Installation - cont.

Figure 2

Refer to Figures 1 and 2, and follow these steps to install the scanner:

1. Turn the host power off (consult the manual for your host

terminal power-off procedures). See Figure 2a.

2. Connect the interface (I/F) cable to the proper port on the Host

terminal (Figure 2b).

If your scanner will receive Power Off the Terminal, skip to step 5.

3. Connect the power cord from the AC/DC adapter at the I/F

connector (Figure 2c).

4. Connect the AC/DC adapter at the wall outlet (Figure 2d).

5. Turn host power on. (Consult the manual for your host

terminal for power-on procedures.)

6. Verify operation--point the laser spot at a sample bar code to

scan it and confirm that the scanner reads by beeping and/or

sending the data to the host terminal.

7. If your installation includes a QS1000™ scanner stand and you

wish to attach it to a countertop, unscrew the gooseneck/cradle

assembly from the base as shown in Figure 1a. Secure the

mount plate to the counter with four screws, then reassemble

the stand in place. The scanner rests in the cradle as shown in

Figure 1b.

When the scanner is powered on, its LaserSense™ feature

automatically detects when you move a bar code label into

range and clearly shows you where the bar code should be

placed by projecting a laser marker spot.

Produkt Specifikationer

Mærke:	Datalogic
Kategori:	Stregkodelæser
Model:	QuickScan QS1000

Har du brug for hjælp?

Hvis du har brug for hjælp til Datalogic QuickScan QS1000 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Stregkodelæser Datalogic Manualer

Datalogic Magellan 8302 Manual

11 Januar 2025

Datalogic CBX500 Manual

9 Oktober 2024

Datalogic PowerScan 7000 2D Manual

22 September 2024

Datalogic Matrix 120 Manual

12 September 2024

Datalogic PSHD-8000 Manual

30 August 2024

Datalogic CBX800 Manual

6 August 2024

Datalogic PowerScan PD9530 Manual

3 August 2024

Datalogic Magellan 800i Manual

3 August 2024

Datalogic Kyman Gun 700-601 Manual

3 August 2024

Datalogic Magellan 1000i Manual

1 August 2024

Stregkodelæser Manualer

Nyeste Stregkodelæser Manualer

Brady V3200 Manual

16 Juni 2025

Code Corporation CR1500 Manual

15 Juni 2025

Approx appLS25WS Manual

24 Marts 2025

Approx appLS24 Manual

24 Marts 2025

Cognex DataMan 50 Manual

26 Februar 2025

Unitech MS852N Manual

23 Februar 2025

23 Februar 2025

23 Februar 2025

23 Februar 2025

23 Februar 2025