Definitive Technology Mythos SSA-42 Manual

Definitive Technology Højttaler Mythos SSA-42

Læs gratis den danske manual til Definitive Technology Mythos SSA-42 (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Definitive Technology Mythos SSA-42, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Unpacking Your SSA Speakers

Please Inspect For Shipping Damage

Each loudspeaker leaves our plant in perfect condition. Any visible or concealed

damage most likely occurred in handling after it left our plant and should be reported

at once to your Definitive dealer or the delivery company that delivered your loud-

speaker. Please unpack your system carefully. Save all cartons and packing materials in

case you move or need to ship your system. Recor the serial number found on thed

back of the Mythos SSA in the appropriate place on the product registration card,

answer all questions and send it in.

VERY IMPORTANT: Accessories

Various parts and accessories that you will need to use your Mythos SSA are in the

carton but are easy to overlook. Open both ends of the shipping carton. Carefully

examine the contents of the shipping carton and packing material to find the plastic

bags with accessories.

Specifications

SSA-42

Dimensions: 403/8" W (107.6 cm) x 41/8" D (10.48 cm) x 41/2" H (11.4 cm)

(speaker only, not including bracket)

Driver Complement: Three 31/4" (8.3 cm) BDSS High-output drivers with coincident

array 3/4" (20 mm) ferro-magnetic fluid damped pure aluminum

dome tweeter.

Two 31/4" (8.3 cm) BDSS High-output full-range drivers.

Four 3" full-range high-output surround drivers(7.6 cm)

with butyl rubber surrounds.

Frequency Response: 60 Hz – 30 kHz

Nominal Impedance: 8 Ohms

Rec. Assoc. Amplification: 20 – 175 Watts/channel

Sensitivity: 89 dB

Weight: 20 lbs. (4.52 kG)

Specifications subject to change without notice.

Definitive Technology

SSA-42

OWNER’S MANUAL

Mythos Solo Surround Array Loudspeakers

Thank You

Thank you for choosing the Definitive Technology Mythos Solo Surround Array

Loudspeaker System featuring Spatial Array™ technology. The Mythos SSA-42 is a

unique speaker that provides a stunning 5-channel surround experience from just one

speaker. This extraordinary speaker makes enjoying a high performance surround audio

system mor convenient than ever before. You chose wisely.e

Our engineers spent many years developing this product. In order to ensure that you

experience the finest performance possible, we encourage you to take a moment to fully

read this owner’s manual and familiarize yourself with the proper installation and set-up

procedures for your Mythos SSA-42 speaker.

Definitive Technology

SSA-42

OWNER’S MANUAL

5. Use a bubble level to make sur the template is level. If the e

TV is wall mounted and not level, the speaker will look better

if it is off-level in exactly the same way as the TV.

6. Use push pins to secure the template to the wall.

7. Mark the location of pilot holes noted on the Mounting

Template with a pencil; remove the template.

8. Pre-drill the pilot hole locations for mounting screws

(not included). Use screws rated to hold securely in the

wall material (we recommend #10 screws).

9. It is best if at least one screw hits a wall stud. If there is no

stud behind the pilot hole location, install wall anchors (not

included) to secure the bracket screws. Follow the wall anchor

manufacturer’s directions. Each wall anchor should be rated

to hold at least one-half of the product net weight

[see specifications on front cover].

10. For masonr walls, use a masonry drill bit to pre-drill holes, y

and use masonry anchors and screws (not included).

11. Pull the five sets of speaker wires through the hole in the bracket.

12. Screw the bracket to the wall.

Wall Mounting the SSA

• We recommend that the SSA speaker be wall mounted

by professional installers or by those appropriately skilled in the

use of power tools and who have knowledge of building codes

and structural issues.

• We recommend that you determine a suitable location for

your speaker installation, and that you complete all wiring

(especially “hidden” in-wall wiring) before mounting the

bracket to your wall.

• Mythos Brackets are not suitable for ceiling mounting.

The Mythos Solo Surround Array loudspeaker comes with a wall

mounting bracket and template that makes secure mounting a breeze.

Follow these directions for installing the wall mounting bracket.

1. Two 1

⁄4"–20 screws have been factory installed on the back of the

speaker. Gently hand-tur the screws to make sur they ar in asn e e

far as they can go. Do not force them beyond the “stop” point.

The screws cannot screw all the way into the speaker and should

protrude as shown in the illustration.

2. Make sure the location you have selected for wall-mounting

does not conceal behind-wall electrical wiring or plumbing.

3. Hold the cardboard template (included) in the intended

location. Make sur the speaker clears the ceiling, adjacent e

walls, corners, beams, lighting fixtures and door/window

frames. Leave at least 11/2

" (38 mm) above the speaker location

to allow the speaker to slide down onto the bracket.

4. Make sure the center of the template is perfectly centered with

the TV screen.

Positioning the SSA

The SSA speaker may be mounted on

the wall above or below the video screen.

It may be placed on a table or shelf

in front of the TV.

If placed on a shelf under a TV, adjust the

leveling feet (screwed all the way in) to

aim the speaker up towards the listeners.

The SSA speaker may be placed directly

on top of TVs that have at least 5-inches

(13 cm) of flat surface on top. Do not

place the SSA speaker on top of any

surface that is not large or stable enough

to securely support the speaker. If the

speaker seems at all unstable or “tipsy”

place the speaker somewhere else. The

warranty does not cover damage

caused by falls due to improper

positioning of the speaker. If the

speaker is above seated listener height,

extend the leveling feet to point the

speaker downward [See Using the Leveling

Feet on page 3].

BACK OF SPEAKER

TOP OF SPEAKER

/ " –

20 SCREWS

THRE NSERTSADED I

+S URR OUN D RIGHT – + FRON T GHT – + CENT ER – + FR ONT LEF T – + SU RROU ND LEF T –RI

PILOT SLOTS

Even if you intend to place the SSA speaker on a TV or shelf you must attach the wall-mount bracket to the speaker. See Using the Leveling Feet on page 3.