Delta Ohm HD25.2 Manual

Delta Ohm Måleudstyr HD25.2

Læs gratis den danske manual til Delta Ohm HD25.2 (32 sider) i kategorien Måleudstyr. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Delta Ohm HD25.2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

Our instruments' quality level is the results of the product continuous development. This

can bring about differences between the information written in this manual and the

instrument that you have purchased. We cannot entirely exclude errors in the manual, for

which we apologize.

The data, figures and descriptions contained in this manual cannot be legally asserted. We

reserve the right to make changes and corrections without prior notice.

REV. 1.0

14th Nov. 2006

HD25.2

- - 2

HD25.2 - Turbidimeter

1. Connectors

2. ESC key: in the menu, cancels the current setting.

3. MEM key: stores the currently displayed screen.

4. Battery symbol: indicates the battery level. The symbol does not appear when the external

power supply is connected.

5. Line for symbols and comments.

6. Main display line.

7. ON-OFF key: turns the instrument on and off. When pressed together with the  key, disables

the automatic turn off.

8. Measurement piece.

9. MENU key: allows access to and exit from the menu. When pressed together with the ENTER

key, starts the calibration procedure.

10. ENTER key: in the menu, confirms the current selection. When pressed together with the

MENU key, starts the calibration procedure.

11. MEAS key: performs the selected measurement. Use the arrows ( and  ) to choose the type

of measurement before pressing the MEAS key.

12.  key: selects the type of measurement. When pressed together with the ON/OFF key, disables

the automatic turn off. In the menu, increases the current value.

13. Secondary display line.

14.  key: selects the type of measurement. In the menu, decreases the current value.

15. PRINT key: prints the data on the current screen. It uses the serial communication port

RS232C or the USB 2.0 port.

Produkt Specifikationer

Mærke:	Delta Ohm
Kategori:	Måleudstyr
Model:	HD25.2

Har du brug for hjælp?

Hvis du har brug for hjælp til Delta Ohm HD25.2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måleudstyr Delta Ohm Manualer

Delta Ohm HD25.2 Manual

1 September 2024

Delta Ohm HD32.8.16 Manual

16 August 2024

Måleudstyr Manualer

Nyeste Måleudstyr Manualer

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025