DeWalt DW802 Manual

DeWalt Kværn DW802

Læs gratis den danske manual til DeWalt DW802 (48 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om DeWalt DW802, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/48
DW802, DW802G
Heavy Duty Small Angle Grinder
Petites meuleuses angulaires de service intensif
Esmeriladoras angulares pequenas para trabajo pesado
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO
ANTES DE USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DEWALT • www.dewalt.com
English
2
SAVE THESE INSTRUCTIONS
WARNING! Read and understand all instructions includ-
ing that provided with attachment and accessories.
Failure to follow all instructions listed below may result in electric
shock, fire and/or serious personal injury.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY DEWALT TOOL, CALL US TOLL FREE AT:
1-800-4-DEWALT (1-800-433-9258)
General Safety Instructions
WORK AREA
• Keep your work area clean and well lit. Cluttered benches
and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust.
Power tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operat-
ing a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Grounded tools must be plugged into an outlet properly
installed and grounded in accordance with all codes and
ordinances. Never remove the grounding prong or modify
the plug in any way. Do not use any adapter plugs. Check
with a qualified electrician if you are in doubt as to whether
the outlet is properly grounded. If the tools should electrically
malfunction or break down, grounding provides a low resist-
ance path to carry electricity away from the user. Applicable
only to Class I (grounded) tools.
• Double insulated tools are equipped with a polarized plug
(one blade is wider than the other.) This plug will fit in a
polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install a polarized outlet. Do not
change the plug in any way. Double insulation eliminates
the need for the three wire grounded power cord and grounded
power supply system. Applicable only to Class II (double
insulated) tools.
• Avoid body contact with grounded surfaces such as pipes,
radiators, ranges, and refrigerators. There is an increased
risk of electric shock if your body is grounded.
• Don’t expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord to carry the tools
or pull the plug from an outlet. Keep cord away from heat,
oil, sharp edges or moving parts. Replace damaged cords
immediately. Damaged cords increase the risk of electric shock.
• When operating a power tool outside, use an outdoor exten-
sion cord marked “W-A” or “W.” These cords are rated for
outdoor use and reduce the risk of electric shock.
Minimum Gage for Cord Sets
Volts Total Length of Cord in Feet
120V 0-25 26-50 51-100 101-150
240V 0-50 51-100 101-200 201-300
Ampere Rating
More Not more AWG
Than Than
6 - 10 18 16 14 12
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use tool while
tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating power tools may result
in serious personal injury.

Produkt Specifikationer

Mærke: DeWalt
Kategori: Kværn
Model: DW802

Har du brug for hjælp?

Hvis du har brug for hjælp til DeWalt DW802 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Kværn DeWalt Manualer

DeWalt

DeWalt DCG415B Manual

7 November 2024
DeWalt

DeWalt D28154 Manual

13 September 2024
DeWalt

DeWalt DW822 Manual

12 September 2024
DeWalt

DeWalt D28128-XE Manual

15 Juli 2024
DeWalt

DeWalt DWE4000-XE Manual

12 Juli 2024
DeWalt

DeWalt DWE4100 Manual

12 Juli 2024
DeWalt

DeWalt D28133 Manual

25 Juni 2024
DeWalt

DeWalt D28134 Manual

25 Juni 2024
DeWalt

DeWalt DWE4001 Manual

9 Juni 2024
DeWalt

DeWalt DWE4215 Manual

9 Juni 2024

Kværn Manualer

Nyeste Kværn Manualer

Hitachi

Hitachi GP2S2 Manual

17 Juni 2025
Metabo

Metabo CC14SFS Manual

17 Juni 2025
Metabo

Metabo VB16Y Manual

17 Juni 2025
Hilti

Hilti SL 5-22 Manual

15 Juni 2025
Victoria Arduino

Victoria Arduino Mythos MyOne Clima Pro Manual

12 Juni 2025
Tryton

Tryton TS152501 Manual

9 Juni 2025
Sogo

Sogo SS-5815 Manual

9 Juni 2025
Vulcan

Vulcan VS121301 Manual

9 Juni 2025
Sogo

Sogo SS-5265 Manual

9 Juni 2025
Smart365

Smart365 SM-04-04200 Manual

9 Juni 2025