Digitus DN-82000 Manual

Digitus Ikke kategoriseret DN-82000

Læs gratis den danske manual til Digitus DN-82000 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Digitus DN-82000, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

14 SLOTS UNMANAGED

MEDIA CONVERTER CHASSIS

PRODUCT OVERVIEW

The 14 slots media converter chassis supports plug-and–play installation of stand-alone

media converters convert modules.

14 slots rack-mounted chassis

This converter chassis can supply several media converters with power, this will simple

the links and structure, it can work stably and adapt broad width of voltage. It can store

strong power and can be operated and managed easily. The maintenance of this chassis

is also very easy. This option is the very one to meet the requirements of good stability,

high capacity, good integration and good quality.

This option supports hot-swap convert modules. It can work with single power supply or

dual power supply as users wish, when the power supply should be maintained or

changed, it is not necessary to pull-out the converters, this makes the maintenance easy.

With all these advantages, this option can supply users with an effective solution of

networks.

INSTALLATION

1. When you unpack this product package, please check the devices with packing list.

2. Install the converter chassis in a standard 483mm (19”) cabinet and fix it.

3. Unscrew two screws from the side next to the RJ45 port of the media converter. Then

use these two screws to fix the carrier given with this option onto the side of media

converter, leaving the bigger side of the screws ahead. Then insert the converter to the

chassis, make sure the power plug of chassis is inserted in the power port of media

converter. When the converter is fully and firmly fit the chassis, fasten the screws on

the carrier. Follow the above steps, install all necessary converters in the chassis, then

block up any slots not for use temporarily.

4. Insert the RJ45 twisted pair to the electrical port of converter, and insert the fiber to the

fiber port of the converter. Then connect the supplied AC to DC power adapter to the

receptacle at the back of the chassis, attach the plug into a standard AC outlet with a

voltage range from 100 to 260 Vac or a DC outlet with a voltage of 48 Vac. Then turn

the power switch on, the POWER LED Lamps in the chassis will on and at green color.

For 14 slots media converter chassis, the POWER LED Lamp is in front side. Then the

fans began to work, that shows the power supply of the chassis is normal and stable.

The LED Indicator Lamps of converters installed in chassis should indicate valid

network connections and working status. Then the chassis began to work stably.

5. If the chassis is with dual power supply, please turn on both two power supply, and they

will work together. This will extends the life cycle of the power supply, and can make

sure the chassis work normally in case one of them broken down.

FAULT AND MAINTENANCE

1. Finding out the problems.

When the electrical current WER LED Lamps of chassis becomes dangerous, the PO

will become red with alarm at the same time. When the problems have been cleared,

the LED Lamps will back to normal.

If the fuse has blown, or the power supply has broken down, the POWER LED Lamps

will be off, and the fans will not work. (The fuse is under the plug, you can pull it out for

checking or changing when necessary.)

When the fans of chassis broken down, the POWER LED Lamps will be normal but the

fans will not work. If this happens, the power supply must be changed for new ones,

and we will do this for users, you should not do it by yourself, or you may break up the

option s.

Produkt Specifikationer

Mærke:	Digitus
Kategori:	Ikke kategoriseret
Model:	DN-82000
Bredde:	485 mm
Dybde:	231 mm
Højde:	90 mm
Produktfarve:	Sort
Opbevaringstemperatur (T-T):	-20 - 85 °C
Driftstemperatur (T-T):	0 - 50 °C
Udgangsspænding for vekselstrømsadapter:	5 V
Dimensioner (BxDxH):	485 x 231 x 90 mm
Effektkrav:	85-265 VAC, 50/60 Hz, 1.2A
Oprindelsesland:	Kina
Størrelse:	19 "
Kode i den britiske toldtarif:	85176200
Antal porte:	14
Rackkapacitet:	2U