Digitus DN-93501 Manual


Læs nedenfor 📖 manual på dansk for Digitus DN-93501 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 14 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
1
3
4
2
4 5
5
6
3
Keystone Jack
Installing Instruction
DN-93501
Follow the direction on the colorcoding
sticker to position T568A or T568B wiring,
separate a little space on proper position
and insert the wire pair by pair into each
slot.
Use 110 or KRONE impact tool to
press and cut off each conductor.
Unshielded type
Shielded type
Insert the IDC cap to x these
wires. Insert the cable tie to tight
up the cable jacket and complete
the installation.
30 mm
I.D.C. Cable tie
I.D.C. Cable tie
T568A
Pin 5 White/Blue
Pin 4 Blue
Pin 1 White/Green
Pin 2 Green
Pin 3 White/Orange
Pin 6 Orange
Pin 7 White/Brown
Pin 8 Brown
T568B
Pin 5 White/Blue
Pin 4 Blue
Pin 1 White/Orange
Pin 2 Orange
Pin 3 White/Green
Pin 6 Green
Pin 7 White/Brown
Pin 8 Brown
Strip approximately 30mm of the cable jacket,
and separate to 4 pair each
Cover the Full shield, then
complete the installation.
( Note: Full shield has to insert into this plastic slot )
Slide the cable jacket into
Cable Holder.
Follow the direction on the color coding
sticker to position T568A or T568B wiring,
separate a little space on proper position
and insert the wire pair by pair into each
slot. Use 110 or KRONE impact tool to
press and cut off each conductor
Insert the cable tie to tight up the cable
jacket. Insert the IDC cap to x these
wires.


Produkt Specifikationer

Mærke: Digitus
Kategori: Ikke kategoriseret
Model: DN-93501
Bredde: 30 mm
Dybde: 20 mm
Højde: 25 mm
Produktfarve: Sort
Pakkebredde: 75 mm
Pakkehøjde: 115 mm
Harmoniseret systemkode (HS): 85369010
Oprindelsesland: Kina

Har du brug for hjælp?

Hvis du har brug for hjælp til Digitus DN-93501 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Digitus Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer