Dimplex LPP100E Manual


Læs gratis den danske manual til Dimplex LPP100E (28 sider) i kategorien Varmeapparat. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Dimplex LPP100E, eller vil du spørge andre brugere om produktet?

Side 1/28
08/80070/0 ISSUE: 2 Series: A
These instructions should be read carefully
and retained for future use. Note also the
information presented on the appliance.
INSTRUCTION MANUAL
Installation and Operating
Dimplex Saletto (LPPE)
Models: LPP050E / LPP075E / LPP100E / LPP150E
IMPORTANT
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR
FUTURE REFERENCE. Note also the information presented on the appliance
CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE INJURY AND/
OR DAMAGE AND MAY INVALIDATE YOUR GUARANTEE
IMPORTANT SAFETY ADVICE
When using electrical heaters, basic precautions should always be followed to reduce
the risk of fire, electrical shock, and injury to persons, including the following:
IMPORTANT: The wall bracket supplied with the heater must be used.
IMPORTANT: All packaging should be disposed of in an appropriate manner.
OVERHEATING WARNING
WARNING: In order to avoid overheating, do not cover or obstruct the heater. Do not
place material or garments on the heater, or obstruct the air circulation around the heater,
for instance by curtains or furniture, as this could cause overheating and a fire risk. NEVER
cover or obstruct in any way the heat outlet slots at the top of the heater or the air inlet
slots in the base of the heater.
WARNING:
THE SURFACES ON THIS HEATER CAN BE HOT. The heater carries a
warning ‘DO NOT COVER’ to alert the user to the risk of fire that exists if the heater is
accidentally covered. DO NOT place combustible items through the heater grille.
CAUTION: Some parts of this product can become very hot and cause burns. Particular
attention has to be given where children and vulnerable people are present.
For your safety this heater is fitted with a thermal cut-out. In the event that the
product overheats for some reason, the cut-out prevents excessive temperatures on
the product by cutting the power to the heater. Once the heater has cooled down,
it will reset automatically, it will continue to cycle on and o automatically until the
reason for overheating is removed. The display screen may flash red to indicate the
product has overheated. To reset the display, remove the obstruction and hold Enter
for 10 seconds.
2


Produkt Specifikationer

Mærke: Dimplex
Kategori: Varmeapparat
Model: LPP100E

Har du brug for hjælp?

Hvis du har brug for hjælp til Dimplex LPP100E stil et spørgsmål nedenfor, og andre brugere vil svare dig




Varmeapparat Dimplex Manualer

Dimplex

Dimplex DX 521 Manual

13 Januar 2025
Dimplex

Dimplex VFE 20 Manual

13 Januar 2025
Dimplex

Dimplex VFE 30 Manual

13 Januar 2025
Dimplex

Dimplex Mini Cube Manual

30 December 2025
Dimplex

Dimplex DX 425E Manual

30 December 2025
Dimplex

Dimplex DTD4T Manual

30 December 2025
Dimplex

Dimplex MPH500 Manual

8 Oktober 2024
Dimplex

Dimplex ECOT4FT Manual

8 Oktober 2024
Dimplex

Dimplex FUTM2CE Manual

4 Oktober 2024
Dimplex

Dimplex VFM60HY Manual

4 Oktober 2024

Varmeapparat Manualer

Nyeste Varmeapparat Manualer

Lavex

Lavex 761AMLV75 Manual

15 Juni 2025
XPower

XPower A-12 Manual

15 Juni 2025
BEKO

BEKO RHO8323BT Manual

14 Juni 2025
XPower

XPower B-55 Manual

14 Juni 2025
XPower

XPower B-2 Manual

14 Juni 2025
XPower

XPower M-27 Manual

14 Juni 2025