Dimplex Ritz Manual

Dimplex Varmeapparat Ritz

Læs gratis den danske manual til Dimplex Ritz (2 sider) i kategorien Varmeapparat. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Dimplex Ritz, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Important Safety Advice:

When using electrical appliances, basic precautions

should be followed to reduce the risk of fire, electric

shock, and injury to persons, including the following :

• If the appliance is damaged, check immediately

with the supplier before installation and operation.

• Do not use this heater in the immediate

surroundings of a bath, shower or swimming pool.

• Do not use outdoors.

• This heater must not be located immediately below

a fixed socket outlet or connection box.

• Do not cover or obstruct in any way the heat outlet

grille located at the bottom of the heater.

Overheating will result if the heater is accidentally

covered.

• Ensure that furniture, curtains or other

combustible materials are positioned no closer

than 1 metre from the heater.

• In the event of a fault unplug the heater.

• Unplug the heater when not required for long

periods.

• Keep supply cord away from the front of the

heater.

• Although this heater complies with safety

standards, we do not recommend its use on deep

pile carpets or on long hair type of rugs.

• The appliance is not intended for use by young

children or infirm persons without supervision.

• Young children or infirm persons should be

supervised to ensure that they do not play with the

appliance.

• The appliance must be positioned so that the plug

is accessible.

• If the supply cord is damaged it must be replaced

by the manufacturer or service agent or similarly

qualified person in order to avoid a hazard.

IMPORTANT : THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE

510 340 340

597

Ritz Stove Club Stove

597

510

Fig. 1

General General

Unpack the heater carefully and retain the packaging for possible

future use, in the event of moving or returning the fire to your

supplier.

Unpack the heater carefully and retain the packaging for possible

future use, in the event of moving or returning the fire to your

supplier.

This model is designed to be free standing and is normally

positioned against a wall.

This model is designed to be free standing and is normally

positioned against a wall.

A choice of 1kW or 2kW heat output is provided by the fan heater,

which is located at the bottom of the unit.

A choice of 1kW or 2kW heat output is provided by the fan heater,

which is located at the bottom of the unit.

Before connecting the heater check that the supply voltage is the

same as that stated on the heater.

Before connecting the heater check that the supply voltage is the

same as that stated on the heater.

Please note: Used in an environment where background noise

is very low, it may be possible to hear a sound which is related

to the operation of the flame effect. This is normal and should

not be a cause for concern.

Please note: Used in an environment where background noise

is very low, it may be possible to hear a sound which is related

to the operation of the flame effect. This is normal and should

not be a cause for concern.

Electrical Electrical

WARNING: THIS APPLIANCE MUST BE EARTHED. WARNING: THIS APPLIANCE MUST BE EARTHED.

This fire is suitable for operation on an AC~ electricity supply having

the same voltage as that shown on its rating label.

This fire is suitable for operation on an AC~ electricity supply having

the same voltage as that shown on its rating label.

Before switching on, please read the safety warnings and operating

instructions.

Before switching on, please read the safety warnings and operating

instructions.

(AUS/NZ) Installation and Operating Instructions

Ritz Stove Model: RIT20 08/19279/1 Issue 1

Club Stove Model: CLB20

Operation

The unique flame effect may be enjoyed whether or not the heating

elements are in operation.

Controls

The heater controls are located behind the door of the heater.

Three switches provide a choice of heat settings. A switch is in the

ON position when the side with the markings on (i.e. I , I , or II ) is

pushed in.

Fig. 2

Switch 1 ( I ) Controls the electricity supply to the heater and

flame effect.

Note: This switch must be in the ON

( I ) position for heater to operate with or without

heat.

Switch 2 ( I ) Provides 1kW heat output

Switch 3 ( II ) Provides 2kW output with switch 2

Maintenance

WARNING – BEFORE UNDERTAKING ANY MAINTENANCE

OR CLEANING REMOVE PLUG OR

DISCONNECT FROM THE ELECTRICITY

SUPPLY.

Lamp Replacement

The product complies with the Australian/New Zealand Safety Standards AS/NZ S 335.2.30:1997 and 2002 Part 1 also the European Standard ElectromagneticCompatibility (EMC)