Dimplex SBN20E Manual

Dimplex Varmeapparat SBN20E

Læs gratis den danske manual til Dimplex SBN20E (2 sider) i kategorien Varmeapparat. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Dimplex SBN20E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Brayford Model: BFD20

547

440

Springborne Model: SBN20

controls

295

547

440

controls

295

Important Safety Advice:

When using electrical appliances, basic precautions

should be followed to reduce the risk of fire, electric

shock, and injury to persons, including the following :

• If the appliance is damaged, check immediately

with the supplier before installation and operation.

• Do not use this heater in the immediate

surroundings of a bath, shower or swimming pool.

• Do not use outdoors.

• This heater must not be located immediately below

a fixed socket outlet or connection box.

• Do not cover or obstruct in any way the heat outlet

grille located at the bottom of the heater.

Overheating will result if the heater is accidentally

covered.

• Ensure that furniture, curtains or other

combustible materials are positioned no closer

than 1 metre from the heater.

• In the event of a fault unplug the heater.

• Unplug the heater when not required for long

periods.

• Keep supply cord away from the front of the

heater.

• Although this heater complies with safety

standards, we do not recommend its use on deep

pile carpets or on long hair type of rugs.

• This appliance is not intended for use by children

or other persons without assistance or

supervision if their physical, sensory or mental

capabilities prevent them from using it safely.

Children should be supervised to ensure that they

do not play with the appliance.

• The appliance must be positioned so that the plug

is accessible.

• If the supply cord is damaged it must be replaced

by the manufacturer or service agent or similarly

qualified person in order to avoid a hazard.

IMPORTANT : THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE

Fig. 1

General General

Unpack the heater carefully and retain the packaging for possible

future use, in the event of moving or returning the fire to your

supplier.

Unpack the heater carefully and retain the packaging for possible

future use, in the event of moving or returning the fire to your

supplier.

This model is designed to be free standing and is normally

positioned against a wall.

This model is designed to be free standing and is normally

positioned against a wall.

A choice of 1kW or 2kW heat output is provided by the fan heater,

which is located at the bottom of the unit.

A choice of 1kW or 2kW heat output is provided by the fan heater,

which is located at the bottom of the unit.

Before connecting the heater check that the supply voltage is the

same as that stated on the heater.

Before connecting the heater check that the supply voltage is the

same as that stated on the heater.

On the Springborne model loose coals are packed separately within

the carton. When the heater is assembled the coals can be placed

on top of the fuel bed, as required.

On the Springborne model loose coals are packed separately within

the carton. When the heater is assembled the coals can be placed

on top of the fuel bed, as required.

Please note: Used in an environment where background noise

is very low, it may be possible to hear a sound which is related

to the operation of the flame effect. This is normal and should

not be a cause for concern.

Electrical Electrical

WARNING: THIS APPLIANCE MUST BE EARTHED. WARNING: THIS APPLIANCE MUST BE EARTHED.

This fire is suitable for operation on an AC~ electricity supply having

the same voltage as that shown on its rating label.

This fire is suitable for operation on an AC~ electricity supply having

the same voltage as that shown on its rating label.

In the event of replacing the fuse supplied, a 13 amp fuse approved

by ASTA to BS 1362 must be used.

In the event of replacing the fuse supplied, a 13 amp fuse approved

by ASTA to BS 1362 must be used.

If the socket outlets in your home are not of the 13 amp BS1363

type they will not accept the plug connected to this heater, therefore

cut off the plug. When cut off this plug can constitute a shock

hazard if inserted into a socket outlet. It must therefore be disposed

of safely.

If the socket outlets in your home are not of the 13 amp BS1363

type they will not accept the plug connected to this heater, therefore

cut off the plug. When cut off this plug can constitute a shock

hazard if inserted into a socket outlet. It must therefore be disposed

of safely.

Before wiring the appropriate plug please note that the wires in this

mains lead are coloured in accordance with the following code.

Before wiring the appropriate plug please note that the wires in this

mains lead are coloured in accordance with the following code.

GREEN/YELLOW - EARTH GREEN/YELLOW - EARTH

BLUE - NEUTRAL BLUE - NEUTRAL

BROWN - LIVE BROWN - LIVE

Connect the Green/Yellow wire to the terminal marked ‘E’ or the earth symbol or

coloured Green or Green/Yellow.

Connect the Green/Yellow wire to the terminal marked ‘E’ or the earth symbol or

coloured Green or Green/Yellow.

Connect the Brown wire to the terminal marked ‘L’ or coloured Red. Connect the Brown wire to the terminal marked ‘L’ or coloured Red.

Connect the Blue wire to the terminal marked ‘N’ or coloured Black. Connect the Blue wire to the terminal marked ‘N’ or coloured Black.

DO NOT connect the Brown (Live) or the Blue (Neutral) wires to the

Earth terminal of your 13 amp plug. If the terminals of the plug are

unmarked or you are in any doubt, consult a qualified electrician.

DO NOT connect the Brown (Live) or the Blue (Neutral) wires to the

Earth terminal of your 13 amp plug. If the terminals of the plug are

unmarked or you are in any doubt, consult a qualified electrician.

CAUTION: If you use this heater in conjunction with a thermal

control, programme controller, timer or any other device which

switches the heater on automatically observe all safety warnings at

all times.

CAUTION: If you use this heater in conjunction with a thermal

control, programme controller, timer or any other device which

switches the heater on automatically observe all safety warnings at

all times.

Installation and Operating Instructions

Brayford Log Stove Model: BFD20 08/18740/3 Issue 3

Springborne Coal Stove Model: SBN20

Please note: Used in an environment where background noise

is very low, it may be possible to hear a sound which is related

to the operation of the flame effect. This is normal and should

not be a cause for concern.

Produkt Specifikationer

Mærke:	Dimplex
Kategori:	Varmeapparat
Model:	SBN20E

Har du brug for hjælp?

Hvis du har brug for hjælp til Dimplex SBN20E stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Varmeapparat Dimplex Manualer

Dimplex DHCHT20M Manual

14 August 2025

Dimplex DTD4T 10 Manual

14 August 2025

Dimplex H 260E Manual

12 August 2025

Dimplex BY 802 S Manual

12 August 2025

Dimplex DHCHR16M Manual

15 Juli 2025

Dimplex DHOC15 Manual

15 Juli 2025

Dimplex DX 512E Manual

5 Juli 2025

Dimplex VFE 60 Manual

5 Juli 2025

Dimplex RCE 150 Manual

5 Juli 2025

Dimplex DTD2T 07 Manual

5 Juli 2025

Varmeapparat Manualer

Nyeste Varmeapparat Manualer

SHX 12KW2025 Manual

29 Oktober 2025

Amantii TRD-30 Manual

18 Oktober 2025

Duro Pro D-EH 3000 R Manual

18 Oktober 2025

Amantii 2939-TRU-VIEW-XL Manual

18 Oktober 2025

NEO Tools 90-085 Manual

17 Oktober 2025

Everdure HPE152W Manual

16 Oktober 2025

Sonnenkönig Ventus Diesel 20 Manual

15 Oktober 2025

Prem-i-air EH0287 Manual

14 Oktober 2025

Fuxtec FX-EH3 Manual

13 Oktober 2025

Bestron AOR9 Manual

12 Oktober 2025