2
Manual No. STSIV_2024A
INTRODUCTION
Congratulations! You have purchased the new
Dinex
®
Smart▪Therm
®
Induction Charger. Your
Dinex
®
Smart▪Therm
®
induction heated base system,
when used within a controlled hot food tray line
process and covered with Dinex
®
insulated domes,
will keep hot plated food up to 60 minutes depending
on menu and initial temperature of food and plate.
Please read this manual for helpful guidelines on how
to use your new equipment. Should you have any
questions concerning the equipment, please call
Dinex
®
Service at 1-888-673-4639.
APPLICATION & USE
The equipment is for commercial use only. Not for
household use. It provides maximum induction
heating compatible with Dinex
®
bases. Use with
Dinex
®
Smart▪Therm
®
bases only and use only for
the purpose described.
SAFETY
The instructions contained in this manual provide
important guidelines for the equipment user
regarding correct and safe installation. As you read
this manual, particular attention should be paid to the
precautions given in various parts of this manual with
the following indicators.
! ATTENTION: Use of this symbol identifies a
potentially hazardous situation which, if not avoided,
may result in damage to the machine or injury to the
operator.
! CAUTION: If the product is used without observing
the information given under this symbol, personal
injury, or damage to equipment may result.
! IMPORTANT: Key information for use and
maintenance of the equipment.
GENERAL SAFETY PRECAUTIONS:
! IMPORTANT: The following instructions reduce the
risk of fire, electric shock, injury, and damage to
equipment.
! Do not attempt to repair this equipment.
Repairs and service work must be performed
by qualified service technicians. Service work
performed by anyone other than authori
zed
Dinex
®
service agents will void the warranty.
! Do not allow water near the charger. Allowi
ng
water near the charger may cause a fire or
electric shock.
! Do not ever put a base in the microwave. A
microwave will damage the base.
! Do not stack the bases on the charger,
charge ONLY one base at a time.
! Do not use damaged bases.
! Do not leave bases unattended on the
charger.
! Do not attempt to heat anything other than
a
Dinex
®
base. Use of other than genuine
Dinex
®
bases and/or replacement parts will
void the warranty.
! Do not use the equipment as a work surf
ace
or cutting board.
! Do not use corrosive cleaners on t
he
equipment. Use only mild detergents.
INSTALLATION
SET UP
1. Carefully remove any packing material from the
induction charger and check loose packing
material for small parts or accessories. Inspect
the charger for concealed damage before placing
packing material aside. Keep the packaging until
you are confident with the equipment’
s
performance.
