DJI GameSir T1d Manual

DJI Joystick GameSir T1d

Læs gratis den danske manual til DJI GameSir T1d (5 sider) i kategorien Joystick. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6 anmeldelser. Har du et spørgsmål om DJI GameSir T1d, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

C2C1

II. Product Parameters

Name of the product

Model of product

Supporting platform

Bluetooth

Battery type

Input

Packaging size

Product size

Bluetooth controller T1d

T1d

Android, iOS

Bluetooth 4.0

600mAh, polymer lithium battery

5V-1A

185*180*80mm

162*101*67mm

Bluetooth controller T1d, support Bluetooth 4.0 wireless connection. It is

suitable for Android devices (version 4.3 or above) and Apple devices

(system version iOS8.0 or above). This product fully intelligent and

automatically identifies various models of equipment, no need to

manually set Android or iOS mode, connect and play.

Bluetooth controller

Operating Manual

I. Product Introduction

※Troubleshoot

※Product notes

III. Concept of Controller IV. Function Description

Pair

Power display

Charging port

Power button

Photo button Video button

Note: The factory default setting of the controller is the "America hand". The left

joystick control the height and the direction, the right joystick control the forward,

backward, and left direction of the flight.

1. Turn on and connect the controller

1) Short press the button to turn on, if it starts successfully, the ABXY

button of the controller will be always on.

2) Power display LED flickers slowly; Enter the Bluetooth mode directly

to wait for the APP connection;

3) Enter the flight control APP to connect the controller;

4) After connecting, the power display LED is always on and show the

quantity of electricity.

5) If the controller has been connected to other phones, press the "Pair"

button of the controller to force the controller to enter the state of waiting

match.

2. Turn-off

1) Long press the power button for 3-5 seconds, shut down the

controller, turn off all the LED lights;

3. Automatic turn-off

1) The controller is in connecting state, if it is idle for more than 5

minutes, the controller will turn off automatically.

2) The controller is in disconnecting state (waiting for connection), if no

connection for 2 minutes, the controller will turn off automatically.

4. Check the power

After the controller connected successfully, the LED lamp will show

current power information.

The LED lamp group shows the proportion: Fully bright is about 75% to

100%; 3 lights are about 50% to 75%; 2 lights are about 25% to 50%; 1

light is about 1% to 25%

5. Low battery alarm

1. When the available power is lower than the low power alarm voltage,

the LED light group lasts double flash;

2. When the available power is lower than the battery protection voltage,

the controller will turn off automatically.

6. Battery charging

1) LED lights 1-4 flicker slowly during charging;

2) When the charge is over (full), the LED light group is always on;

Disconnect the charging cable after charging.

7. Reset

Press the pinhole on the back of the controller quickly with the paperclip,

to force the entire controller to power off once, and reboot.

8. Firmware upgrading(OTA)

Connect the controller through the mobile phone APP Bluetooth, to

process OTA upgrade. Support Android 4.3 +, iOS8.0 + system; App

download address: www.gamesirhk/t1d

1) After entering the upgrade mode, the LED keeps on Lantern Dance,

and waits for the upgrade.

2) After the upgrade is completed, turn off the machine and restart it

automatically.

1. When you can't start the machine, Maybe the built-in battery is out of

power. Please recharge the controller with the USB line and start up

again.

2. If the controller crashed or dropped please don't keep it far away from

the device, or reconnect.

3. Factory setting (reset): There is a small hole on the back of the

controller, press it down with a toothpick or other hard bar object, press

RESET key to restore the factory setting.

1. Avoid strong vibration, don't disassemble, refit, repair by yourself.

2. Avoid storing in humid, high temperature, fumes and other places

3. Avoid the water or other liquids entering the inside of the controller, it

may affect the controller function.

4. There are batteries inside, do not drop the controller into the fire, there

is a danger of explosion.

5. The charging voltage of this product is USB 3.7-5.5V DC power

supply (ordinary Android mobile phone charging power can be used

directly), otherwise it may not be able to charge or cause damage.

6. Children need to use this product in the custody of an adult.

7. If there is a quality problem or suggestion, please contact the seller or

after sales personnel, and see the contact information on the outer

packing.

Lifting

Turn left Turn right

Back

Left Right

Falling

Custom key

Custom

key

Custom

key

Custom

key

Custom

key

Right joystick

Left joystick

Custom

key

Custom key

Produkt Specifikationer

Mærke:	DJI
Kategori:	Joystick
Model:	GameSir T1d
Produktfarve:	Sort
Batterikapacitet:	600 mAh
Produkttype:	Styreenhed
Husmateriale:	Plastic,Faux leather
Batteritype:	Indbygget batteri
Genopladeligt batteri:	Ja
Kapabilitet:	Tello
Mærke kompatibilitet:	DJI
Minimal driftstemperatur:	0 °C
Maksimal driftstemperatur:	40 °C
DC spændingsområde:	3.7 - 5.2 V