Dormakaba HSW-ES Manual


Læs gratis den danske manual til Dormakaba HSW-ES (53 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Dormakaba HSW-ES, eller vil du spørge andre brugere om produktet?

Side 1/53
HSW-ES Sliding Glass Walls
Easy Safe
Installation instructions
940001 – 05-2019
| | EN
2HSW-ES 05-2019940001
dormakaba HSW-ES Sliding Glass Walls Installation Instructions
Table of Contents
Table of contents
1  Technical specifications 3
1.1 Overview 3
1.1.1 General information 3
1.1.2 Intended use 3
1.1.3 Glass requirements/fittings/mounting 3
1.1.4 Requirements for glass panel 3
1.1.5 Safety instructions 3
1.1.6 Symbols used - Safety/Installation 3
1.1.7 Maintenance, care, repair 3
1.1.8 Disposal 3
1.2 Specification - technical data 4
1.3 Tempered laminate glass (TLG) and
adhesive specifications 4
1.4 Tools required 4
1.5 Installation options/Overall top of door
components 5
1.6 Installation options/Bottom of door
components 6
1.7 Installation options/Bottom of door
components (continued) 7
2 Installation instructions - Prepare track 8
2.1 Determine the track arrangement 8
2.2 Install single-action pivoting end panel
retaining clip 9
2.3 Install door track stop in stacking area 10
2.4 Installing the track 11
2.5 Installing upper pivot block 12
2.6 Install rollers in track 13
2.7 Install revision piece 14
2.8 Prepare the roller pattern in the track 15
3 Installation instructions -
DA & SA pivoting end panel 16
3.1 Preparing the DA & SA pivoting end panel
(with monolithic glass only) 16
3.2 Preparing the DA & SA pivoting end panel
(with tempered laminated glass only) 17
3.3 Preparing the upper pivot block 18
3.4 Install floor pivot or BTS80 closer 19
3.5 Install pivot into end panel carrier profile 20
3.6 Install top cover gasket 21
3.7 Installing top covers 21
3.8 Install DA & SA pivoting end panel into track 22
3.9 Secure end panel in track 23
4 Installation instructions -
Sliding panel 24
4.1 Preparing the sliding panel
(with monolithic glass only) 24
4.2 Preparing the sliding panel
(with tempered laminated glass only) 25
4.3 Install sliding panel onto rollers and
adjust door height 26
4.4 Install gasket and top cover 27
5 Installation instructions -
Double-action sliding panel with ITS96 28
5.1 Preparing the DA sliding panel
(with monolithic glass) 28
5.2 Preparing the DA sliding panel
(with tempered laminated glass only) 29
5.3 Installing three piece lock 30
5.4 Prep for installing two piece lock
(when required) 31
5.5 Install top cover and carrier profile gaskets 31
5.6 Installing three piece lock (continued) 32
5.7 Install two piece lock (continued) 33
5.8 Installing DA sliding panels onto rollers and
adjust door height 34
5.9 Secure three piece lock to track 35
5.10 Secure two piece lock to track 36
5.11 ITS96 closer adjustment 37
5.12 ITS96 hold open (optional) and spring force
adjustment 38
6 Installation instructions -
Fixed panel door 39
6.1 Preparing the fixed panel door
(with monolithic glass only) 39
6.2 Preparing the fixed panel door
(with tempered laminated glass only) 40
6.3 Installing the fixed panel holders 41
6.4 Installing the saddle and fixed panel door 42
6.5 Adjusting and securing fixed panel door 43
6.6 Install gasket and top cover 44
7 Installation instructions -
Alignment, covers, end caps, miscellaneous 45
7.1 Aligning panels into stacking area 45
7.2 Aligning panels side by side in straight run 46
7.3 Secure carrier profile file connecting inserts
and end caps 47
7.4 Drilling for ES locking bolt strike 48
7.5 Secure bottom rail covers and rail lock
preparation 49
7.6 Installing the brush 50
7.7 Selecting the proper end cap 51
7.8 Secure the end caps 52


Produkt Specifikationer

Mærke: Dormakaba
Kategori: Ikke kategoriseret
Model: HSW-ES

Har du brug for hjælp?

Hvis du har brug for hjælp til Dormakaba HSW-ES stil et spørgsmål nedenfor, og andre brugere vil svare dig