Dormakaba Oracode 660i Manual

Dormakaba Smart hjem Oracode 660i

Læs gratis den danske manual til Dormakaba Oracode 660i (5 sider) i kategorien Smart hjem. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Dormakaba Oracode 660i, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

1 PK3646

07_18

ORACODE 660i WIRELESS LOCK

ACTIVATION / PROGRAMMING

For 660i Wireless Locks with Standard Gateway

ORACODE SMART CONTROLLER INSTALLATION

WIRELESS LOCK ACTIVATION (PUT ON-LINE)

1. SMART CONTROLLER POSITIONING

• Avoid placing the Smart Controller in close proximity

(< 5 feet / 2 m) to a WiFi device.

• Position the Smart Controller within 33 ft / 10 meters of

the lock.

• Avoid heavy obstruction between the Smart Controller and lock

(e.g., metallic or concrete wall or floor).

• Avoid placing the Smart Controller close to metallic objects (e.g.,

metallic table, refrigerator, filing cabinets, etc.).

2. SMART CONTROLLER CONNECTION

• Connect the Smart Controller to the Internet modem/router

using the Ethernet Cable.

• Boot up the Smart Controller by connecting the Power Adapter.

• The Smart Controller will perform any necessary updates during

the boot-up process, and the green LEDs on the top of the

Smart Controller will come on (no specific order). The boot-up

process can take from 30 seconds to a few minutes.

• Wait until all green LEDs are on. This confirms the Smart

Controller has successfully performed all necessary updates and

is ready to connect to the Oracode Server

NOTE: The ZigBee LED may not illuminate during the initial

installation. This is normal in most situations. Proceed with

Wireless Lock Activation

1. ACTIVATION CODE GENERATION

• Log on to your Oracode Live account (www.kabaecodewireless.com).

• Go to “Door Monitoring & Management” then to “Door Monitoring”.

• Within the “Door Monitoring” module, select the door to be activated from the door list, and click the ”Activate as

Wireless” button.

• Select the Time Zone where the controller and lock will be located. The Network Name will be populated

automatically, using the Door name as its basis. This can be edited if need be. Click “Save Changes”.

• When you click the “Save Changes” button, the Activation number will be provided.

• Use this number to complete the Activation Process in the following steps 2.2 (for Oracode Live) or 2.3 (for

BeHome247).

For 660i Wireless Lock with Smart Controller

Smart Controller (Back)

USB Ethernet Power

Smart Controller (Top)

Power

Adaptor

Ethernet

Cable

2 PK3646

07_18

dormakaba Oracode 660i Wireless Lock Activation/Programming

WIRELESS LOCK ACTIVATION (Continued)

2. ACTIVATION PROCESS WITH ORACODE LIVE

• Once the Activation number is provided, a new field will be presented where

the Smart Controller’s MAC address is to be entered.

• Enter the controller’s MAC address (located on Bottom Label), and then

click the “Enable Discovery Mode” button.

• The Smart Controller will be in ZigBee “Join” mode for 10 mins, and the

ZigBee LED on the Smart Controller will be blinking.

• On the lock keypad, press * # * # and enter the 8-digit Activation Code to

start the activation process.

• The lock’s green LED will blink once at the beginning of the activation

process (the activation process could last from a few secs to 2 mins).

• A green LED and a high-pitch beep indicates successful connection to the

Oracode Server

• A series of silent green LED blinks will follow. This is the lock programming

being received from the Oracode Server. Once there are no more silent

green LED blinks, the lock programming is complete.

• After a few moments, the Door Details page within Oracode Live for the

activated door will be displayed, confirming that the Activation Process

is complete.

• A red LED and a low-pitch beep at the end of the activation process

indicates a failure. In this case, consult Point 3.

3. ACTIVATION PROCESS WITH BEHOME247

• Log into your BeHome247 account (vr.behome247.com).

• Select the property where you are installing the Smart Controller, then click

the “Settings” tab.

• Notify BeHome247 of the controller’s Serial ID prior to the activation

process, so they can create the gateway on their server and assign it to the

account for activation.

• In the “BeHome247 Automation” area, enter the Smart Controller’s serial

number (located on Bottom Label) in the field labeled “Gateway Number”,

and click “Save.”

• Scroll down to the “KABA Lock System” area, enter the door’s name in the

field labeled “Door name”, check the “This property uses wireless I-locks”

box, and click “Save.”

• Check the “Show advanced controls” box, and click “Join” under “Zigbee

powered locks’.” The Smart Controller will be in ZigBee “Join” mode for

10 minutes.

• On the lock keypad, press * # * # and enter the 8-digit Activation Code to

start the activation process.

• The lock’s green LED will blink once at the beginning of the activation

process (the activation process could last from a few seconds to 2 minutes).

• A green LED and a high-pitch beep indicates successful connection to the

Oracode Server.

• A series of silent green LED blinks will follow. This is the lock programming

being received from the Oracode Server. Once there are no more silent

green LED blinks, the lock programming is complete.

• You can now access the lock from the BeHome247 and Oracode Live

websites.

• A red LED and a low-pitched beep at the end of the activation process

indicates a failure. In this case, consult Point 3.

Oracode 660i (Front)

Smart Controller

(Bottom Label)

1. Power

2. Internet

3. Wi-Fi

4. Z-wave

5. Service

6. ZigBee

7. Bluetooth







Smart Controller

(LED Panel)

Produkt Specifikationer

Mærke:	Dormakaba
Kategori:	Smart hjem
Model:	Oracode 660i

Har du brug for hjælp?

Hvis du har brug for hjælp til Dormakaba Oracode 660i stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Smart hjem Dormakaba Manualer

Dormakaba Oracode 660i Manual

19 August 2024

Smart hjem Manualer

Nyeste Smart hjem Manualer

1 August 2025

31 Juli 2025

31 Juli 2025

31 Juli 2025

Tripp Lite Protect It! TLP808TELTAA Manual

31 Juli 2025

X-Sense Pro SAL51 Manual

31 Juli 2025

Acer Connect M3 Manual

30 Juli 2025

Tesla TSL-GW-GT03ZG Manual

30 Juli 2025

Acer Predator Connect W6d Manual

30 Juli 2025

WiZ Contact Sensor Manual

30 Juli 2025