Draper 36748 Manual
Draper
Ikke kategoriseret
36748
Læs nedenfor 📖 manual på dansk for Draper 36748 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 3 personer og blev bedømt med 4.7 stjerner i gennemsnit af 2 brugere
Side 1/2
36748
EN
Original Instructions
Version 3 – March 2023
MECHANICAL
WATER TIMER
Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF Website: drapertools.com E -mail: sales@drapertools.com
Read this manual in full before using this product
and retain it for future use. Always use the latest
version of the manual, available from
drapertools.com/manuals
1. Intended Use
This product is designed for controlling water
ow directly from the tap and is suitable for
applications such as irrigation hoses and
sprinklers. The product functions like an egg
timer: water ow can be enabled for a designated
period of time or left on indenitely with manual
cut-o. Any other application beyond the
conditions established for use will be considered
misuse. Draper Tools accepts no responsibility for
improper use of this product.
Important: This product is suitable for use with
clean water ONLY. DO NOT attempt to use this
product to control the ow of any other liquid.
(1)
(1) Timer dial
(2) Inlet
(3) Inlet reducer and lter
(4) Outlet
(5) Hose connector
(2)
(4)
(5)
(3)
2. Specication
Stock No. 36748
Part No. WTM1
Max. watering time: 120mins
Inlet
1" BSP female with 3/4" BSP
female adaptor ring and lter
Outlet
3/4" BSP male with 1/2"
hose connector
Recommended
water pressure
0.5–12bar
Recommended
operating temp.
6–60°C
Recommended
water source
Cold mains water
3. Installation
Important: This product is best suited for use with cold
mains-fed systems.
1. Connect the timer inlet (2) directly to the tap,
using the 3/4" reducer (3) if appropriate.
2. Connect a suitable hose to the timer outlet (4),
using the hose connector (5) is appropriate.
3. Set the timer dial as appropriate;
see 4. Setting the Timer.
4. When ready, switch on the water supply
at the tap.
4. Setting the Timer
Important: If the timer is set to operate, the water will
begin to ow immediately when the tap is opened. Ensure
that the connected system is ready for operation before
opening the tap.
To operate the timer, rotate the dial (1) to the appropriate
position. The timer has three operating modes:
• O:
Water does not ow into the connected hose.
– Rotate the dial and direct the arrow to the
position. 0
The timer may continue to Important:
operate for a few seconds while the mechanism
winds down.
• Timer:
Water ows into the hose for the designated
time period.
– Rotate the dial clockwise and direct the arrow
to the number of minutes that water ow
is required.
Important: If the tap is open, water will begin to
ow immediately.
– Water will continue to ow until the
designated time has elapsed and the timer
reaches the position.0
• Manual:
Water ows into the hose until the timer or tap is
manually switched o.
– Rotate the dial anticlockwise and direct the
arrow to the position.Manual
Important: The dial will click as is it moved into
and out of Manual mode. If the tap is open,
water will begin to ow immediately.
– To stop the water ow, rotate the dial clockwise
to the position.0
5. Notes on Use
• When used with higher pressure water sources,
use a pressure reducer between the source and
the timer.
• Draper Tools recommends removing the timer
from the water supply during colder months.
expose the timer to freezing Important: DO NOT
temperatures or frost.
• When using a gravity-fed watering system, ensure
that a tap lter is used with the timer.
use bore water or Important: DO NOT
unltered water.
• use any pump to draw or supply water DO NOT
from or into the timer.
• use with any water supply that DO NOT
is unstable.
• DO NOT use this product for any liquid other
than water.
6. Maintenance and Disposal
• Regularly ush the timer with clean water to prevent
build-up of debris and sediment.
• Regularly remove and clean the inlet reducer (3).
• Periodically inspect all gaskets and O-rings for signs of
damage and leakage.
• attempt to disassemble this product. DO NOT
• Store the product in a cool and clean environment, out
of direct sunlight and away from potential frost.
• Drain the product of any residual liquid and allow it to
dry before storing it.
• Keep out of reach of children.
• At the end of its working life, dispose of the product
responsibly and in line with local regulations; recycle
where possible.
7. Symbols
Read the instruction manual before use
Inlet size
Outlet size
9
mm max
3/4"
13mm
1/2”
© Published by Draper Tools Limited
Produkt Specifikationer
| Mærke: | Draper |
| Kategori: | Ikke kategoriseret |
| Model: | 36748 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Draper 36748 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Draper Manualer
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
Ikke kategoriseret Manualer
- Ikke kategoriseret CasaFan
- Ikke kategoriseret Primera
- Ikke kategoriseret Cool Maker
- Ikke kategoriseret Momini
- Ikke kategoriseret Totolink
- Ikke kategoriseret Renkforce
- Ikke kategoriseret ICC
- Ikke kategoriseret Lantus
- Ikke kategoriseret Skymaster
- Ikke kategoriseret Kospel
- Ikke kategoriseret Areca
- Ikke kategoriseret AMS Neve
- Ikke kategoriseret Reflecta
- Ikke kategoriseret Amica
- Ikke kategoriseret Séura
Nyeste Ikke kategoriseret Manualer
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025
1 Juni 2025